From: Krishna Kurapati <krishna.kurapati@xxxxxxxxxxxxxxxx>
Enable secondary USB controller on QCS615 Ride platform. The secondary
USB controller is made "host", as it is a Type-A port.
Secondary USB controller of QCS615 Ride has Type-A port exposed for
connecting peripheral. The VBUS to the peripheral is provided by
TPS2549IRTERQ1 regulator connected to the port. The regulator has an
enable pin controlled by PM8150. Model it as fixed regulator and keep it
Always-On at boot, since the regulator is GPIO controlled regulator.
Signed-off-by: Krishna Kurapati <krishna.kurapati@xxxxxxxxxxxxxxxx>
Co-developed-by: Song Xue <quic_songxue@xxxxxxxxxxx>
Signed-off-by: Song Xue <quic_songxue@xxxxxxxxxxx>
---
arch/arm64/boot/dts/qcom/qcs615-ride.dts | 36 ++++++++++++++++++++++++++++++++
1 file changed, 36 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/qcs615-ride.dts b/arch/arm64/boot/dts/qcom/qcs615-ride.dts
index f41319ff47b983d771da52775fa78b4385c4e532..66f988104697367e87c1a9e688b3e1ff4c10a644 100644
--- a/arch/arm64/boot/dts/qcom/qcs615-ride.dts
+++ b/arch/arm64/boot/dts/qcom/qcs615-ride.dts
@@ -4,6 +4,7 @@
*/
/dts-v1/;
+#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
#include "qcs615.dtsi"
#include "pm8150.dtsi"
@@ -33,6 +34,16 @@ xo_board_clk: xo-board-clk {
#clock-cells = <0>;
};
};
+
+ regulator-usb2-vbus {
+ compatible = "regulator-fixed";
+ regulator-name = "USB2_VBUS";
+ gpio = <&pm8150_gpios 10 GPIO_ACTIVE_HIGH>;
+ pinctrl-0 = <&usb2_en>;
+ pinctrl-names = "default";
+ enable-active-high;
+ regulator-always-on;
+ };
};
&apps_rsc {
@@ -203,6 +214,15 @@ &gcc {
<&sleep_clk>;
};
+&pm8150_gpios {
+ usb2_en: usb2-en-state {
+ pins = "gpio10";
+ function = "normal";
+ output-enable;
+ power-source = <0>;
+ };
+};
+
&pon_pwrkey {
status = "okay";
};
@@ -248,6 +268,22 @@ &usb_1_dwc3 {
dr_mode = "peripheral";
};
+&usb_hsphy_2 {
+ vdd-supply = <&vreg_l5a>;
+ vdda-pll-supply = <&vreg_l12a>;
+ vdda-phy-dpdm-supply = <&vreg_l13a>;
+
+ status = "okay";
+};
+
+&usb_2 {
+ status = "okay";
+};
+
+&usb_2_dwc3 {
+ dr_mode = "host";
+};
+
&watchdog {
clocks = <&sleep_clk>;
};
--
2.25.1
