Add SDHC1 and SDHC2 support to the QCS615 Ride platform.
Signed-off-by: Yuanjie Yang <quic_yuanjiey@xxxxxxxxxxx>
---
arch/arm64/boot/dts/qcom/qcs615.dtsi | 211 +++++++++++++++++++++++++++
1 file changed, 211 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/qcs615.dtsi b/arch/arm64/boot/dts/qcom/qcs615.dtsi
index c0e4b376a1c6..31b8387674b8 100644
--- a/arch/arm64/boot/dts/qcom/qcs615.dtsi
+++ b/arch/arm64/boot/dts/qcom/qcs615.dtsi
@@ -437,6 +437,73 @@ qusb2_hstx_trim: hstx-trim@1f8 {
};
};
+ sdhc_1: mmc@7c4000 {
+ compatible = "qcom,qcs615-sdhci", "qcom,sdhci-msm-v5";
+ reg = <0x0 0x007c4000 0x0 0x1000>,
+ <0x0 0x007c5000 0x0 0x1000>,
+ <0x0 0x007c8000 0x0 0x8000>;
+ reg-names = "hc",
+ "cqhci",
+ "ice";
+
+ interrupts = <GIC_SPI 641 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 644 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "hc_irq",
+ "pwr_irq";
+
+ clocks = <&gcc GCC_SDCC1_AHB_CLK>,
+ <&gcc GCC_SDCC1_APPS_CLK>,
+ <&rpmhcc RPMH_CXO_CLK>,
+ <&gcc GCC_SDCC1_ICE_CORE_CLK>;
+ clock-names = "iface",
+ "core",
+ "xo",
+ "ice";
+
+ resets = <&gcc GCC_SDCC1_BCR>;
+
+ power-domains = <&rpmhpd RPMHPD_CX>;
+ operating-points-v2 = <&sdhc1_opp_table>;
+ iommus = <&apps_smmu 0x02c0 0x0>;
+ interconnects = <&aggre1_noc MASTER_SDCC_1 QCOM_ICC_TAG_ALWAYS
+ &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>,
+ <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+ &config_noc SLAVE_SDCC_1 QCOM_ICC_TAG_ACTIVE_ONLY>;
+ interconnect-names = "sdhc-ddr",
+ "cpu-sdhc";
+
+ qcom,dll-config = <0x000f642c>;
+ qcom,ddr-config = <0x80040868>;
+ supports-cqe;
+ dma-coherent;
+
+ status = "disabled";
+
+ sdhc1_opp_table: opp-table {
+ compatible = "operating-points-v2";
+
+ opp-50000000 {
+ opp-hz = /bits/ 64 <50000000>;
+ required-opps = <&rpmhpd_opp_low_svs>;
+ };
+
+ opp-100000000 {
+ opp-hz = /bits/ 64 <100000000>;
+ required-opps = <&rpmhpd_opp_svs>;
+ };
+
+ opp-200000000 {
+ opp-hz = /bits/ 64 <200000000>;
+ required-opps = <&rpmhpd_opp_svs_l1>;
+ };
+
+ opp-384000000 {
+ opp-hz = /bits/ 64 <384000000>;
+ required-opps = <&rpmhpd_opp_nom>;
+ };
+ };
+ };
+
gpi_dma0: dma-controller@800000 {
compatible = "qcom,qcs615-gpi-dma", "qcom,sdm845-gpi-dma";
reg = <0x0 0x800000 0x0 0x60000>;
@@ -1130,6 +1197,96 @@ qup_uart7_rx: qup-uart7-rx-state {
pins = "gpio13";
function = "qup1";
};
+
+ sdc1_state_on: sdc1-on-state {
+ clk-pins {
+ pins = "sdc1_clk";
+ bias-disable;
+ drive-strength = <16>;
+ };
+
+ cmd-pins {
+ pins = "sdc1_cmd";
+ bias-pull-up;
+ drive-strength = <10>;
+ };
+
+ data-pins {
+ pins = "sdc1_data";
+ bias-pull-up;
+ drive-strength = <10>;
+ };
+
+ rclk-pins {
+ pins = "sdc1_rclk";
+ bias-pull-down;
+ };
+ };
+
+ sdc1_state_off: sdc1-off-state {
+ clk-pins {
+ pins = "sdc1_clk";
+ bias-disable;
+ drive-strength = <2>;
+ };
+
+ cmd-pins {
+ pins = "sdc1_cmd";
+ bias-pull-up;
+ drive-strength = <2>;
+ };
+
+ data-pins {
+ pins = "sdc1_data";
+ bias-pull-up;
+ drive-strength = <2>;
+ };
+
+ rclk-pins {
+ pins = "sdc1_rclk";
+ bias-pull-down;
+ };
+ };
+
+ sdc2_state_on: sdc2-on-state {
+ clk-pins {
+ pins = "sdc2_clk";
+ bias-disable;
+ drive-strength = <16>;
+ };
+
+ cmd-pins {
+ pins = "sdc2_cmd";
+ bias-pull-up;
+ drive-strength = <10>;
+ };
+
+ data-pins {
+ pins = "sdc2_data";
+ bias-pull-up;
+ drive-strength = <10>;
+ };
+ };
+
+ sdc2_state_off: sdc2-off-state {
+ clk-pins {
+ pins = "sdc2_clk";
+ bias-disable;
+ drive-strength = <2>;
+ };
+
+ cmd-pins {
+ pins = "sdc2_cmd";
+ bias-pull-up;
+ drive-strength = <2>;
+ };
+
+ data-pins {
+ pins = "sdc2_data";
+ bias-pull-up;
+ drive-strength = <2>;
+ };
+ };
};
stm@6002000 {
@@ -2753,6 +2910,60 @@ cti@7900000 {
clock-names = "apb_pclk";
};
+ sdhc_2: mmc@8804000 {
+ compatible = "qcom,qcs615-sdhci", "qcom,sdhci-msm-v5";
+ reg = <0x0 0x08804000 0x0 0x1000>;
+ reg-names = "hc";
+
+ interrupts = <GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 222 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "hc_irq",
+ "pwr_irq";
+
+ clocks = <&gcc GCC_SDCC2_AHB_CLK>,
+ <&gcc GCC_SDCC2_APPS_CLK>,
+ <&rpmhcc RPMH_CXO_CLK>;
+ clock-names = "iface",
+ "core",
+ "xo";
+
+ power-domains = <&rpmhpd RPMHPD_CX>;
+ operating-points-v2 = <&sdhc2_opp_table>;
+ iommus = <&apps_smmu 0x02a0 0x0>;
+ resets = <&gcc GCC_SDCC2_BCR>;
+ interconnects = <&aggre1_noc MASTER_SDCC_2 QCOM_ICC_TAG_ALWAYS
+ &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>,
+ <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+ &config_noc SLAVE_SDCC_2 QCOM_ICC_TAG_ACTIVE_ONLY>;
+ interconnect-names = "sdhc-ddr",
+ "cpu-sdhc";
+
+ qcom,dll-config = <0x0007642c>;
+ qcom,ddr-config = <0x80040868>;
+ dma-coherent;
+
+ status = "disabled";
+
+ sdhc2_opp_table: opp-table {
+ compatible = "operating-points-v2";
+
+ opp-50000000 {
+ opp-hz = /bits/ 64 <50000000>;
+ required-opps = <&rpmhpd_opp_low_svs>;
+ };
+
+ opp-100000000 {
+ opp-hz = /bits/ 64 <100000000>;
+ required-opps = <&rpmhpd_opp_svs>;
+ };
+
+ opp-202000000 {
+ opp-hz = /bits/ 64 <202000000>;
+ required-opps = <&rpmhpd_opp_nom>;
+ };
+ };
+ };
+
dc_noc: interconnect@9160000 {
reg = <0x0 0x09160000 0x0 0x3200>;
compatible = "qcom,qcs615-dc-noc";
--
2.34.1
