[PATCH v3 19/22] arm64: dts: mediatek: mt7988a-bpi-r4: Enable t-phy for ssusb1

[Frank Wunderlich <linux@xxxxxxxxx>]

From: Frank Wunderlich <frank-w@xxxxxxxxxxxxxxx>

Bananapi R4 uses t-phy for usb. Enable its node at board level.

Signed-off-by: Frank Wunderlich <frank-w@xxxxxxxxxxxxxxx>
---
 arch/arm64/boot/dts/mediatek/mt7988a-bananapi-bpi-r4.dts | 4 ++++
 arch/arm64/boot/dts/mediatek/mt7988a.dtsi                | 2 +-
 2 files changed, 5 insertions(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/mediatek/mt7988a-bananapi-bpi-r4.dts b/arch/arm64/boot/dts/mediatek/mt7988a-bananapi-bpi-r4.dts
index 0dc1fd9265c6..129031b0d784 100644
--- a/arch/arm64/boot/dts/mediatek/mt7988a-bananapi-bpi-r4.dts
+++ b/arch/arm64/boot/dts/mediatek/mt7988a-bananapi-bpi-r4.dts
@@ -306,6 +306,10 @@ &serial0 {
 	status = "okay";
 };
 
+&tphy {
+	status = "okay";
+};
+
 &watchdog {
 	status = "okay";
 };
diff --git a/arch/arm64/boot/dts/mediatek/mt7988a.dtsi b/arch/arm64/boot/dts/mediatek/mt7988a.dtsi
index c0a49f68834a..0766ca0dd3f6 100644
--- a/arch/arm64/boot/dts/mediatek/mt7988a.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt7988a.dtsi
@@ -525,7 +525,7 @@ pcie_intc1: interrupt-controller {
 			};
 		};
 
-		t-phy@11c50000 {
+		tphy: t-phy@11c50000 {
 			compatible = "mediatek,mt7986-tphy",
 				     "mediatek,generic-tphy-v2";
 			#address-cells = <2>;
-- 
2.43.0