From: Frank Wunderlich <frank-w@xxxxxxxxxxxxxxx>
Add additional thermal trips to Bananapi R4 board.
SoC only contains the critical trip.
Signed-off-by: Frank Wunderlich <frank-w@xxxxxxxxxxxxxxx>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@xxxxxxxxxxxxx>
---
.../dts/mediatek/mt7988a-bananapi-bpi-r4.dts | 28 +++++++++++++++++++
1 file changed, 28 insertions(+)
diff --git a/arch/arm64/boot/dts/mediatek/mt7988a-bananapi-bpi-r4.dts b/arch/arm64/boot/dts/mediatek/mt7988a-bananapi-bpi-r4.dts
index df53512c6890..8a320d9da443 100644
--- a/arch/arm64/boot/dts/mediatek/mt7988a-bananapi-bpi-r4.dts
+++ b/arch/arm64/boot/dts/mediatek/mt7988a-bananapi-bpi-r4.dts
@@ -28,6 +28,34 @@ reg_3p3v: regulator-3p3v {
};
};
+&cpu_thermal {
+ trips {
+ cpu_trip_hot: hot {
+ temperature = <120000>;
+ hysteresis = <2000>;
+ type = "hot";
+ };
+
+ cpu_trip_active_high: active-high {
+ temperature = <115000>;
+ hysteresis = <2000>;
+ type = "active";
+ };
+
+ cpu_trip_active_med: active-med {
+ temperature = <85000>;
+ hysteresis = <2000>;
+ type = "active";
+ };
+
+ cpu_trip_active_low: active-low {
+ temperature = <40000>;
+ hysteresis = <2000>;
+ type = "active";
+ };
+ };
+};
+
&pio {
mdio0_pins: mdio0-pins {
mux {
--
2.43.0
