From: Frank Wunderlich <frank-w@xxxxxxxxxxxxxxx> This series adds pinctrl driver, dt-bindings and dts node for pinctrl on mediatek mt7988 SoC. changes in v7: - add const for pins and mtk_pin_soc as suggested by Christophe JAILLET in v5 - left angelos RB because of minor change (hope this is right) changes in v6: - some fixes to binding - changed title and fixed typo in bpi-r4 patch - added RB's changes in v5: - rebased to 6.13-rc1 - moved dt nodes with mutliple options to BPI-R4 board - changes suggested by angelo in v4 - changed example in binding and dt node to not using const MTK_DRIVE_8mA changes in v4: - fixed fixed string binding error changes in v3: - rebase on rafals dts patches - update binding to have mux subnode as fixed string and conf with optional suffix changes in v2: binding: - drop gpio-cells description - move ref in mux subnode up - order uart-functions alphanumeric and fix typo dts: - fix indentation of reg-values Daniel Golle (2): pinctrl: mediatek: add support for MTK_PULL_PD_TYPE pinctrl: mediatek: add MT7988 pinctrl driver Frank Wunderlich (3): dt-bindings: pinctrl: add binding for MT7988 SoC arm64: dts: mediatek: mt7988: Add pinctrl support arm64: dts: mediatek: mt7988a-bpi-r4: Add pinctrl subnodes for bpi-r4 .../pinctrl/mediatek,mt7988-pinctrl.yaml | 575 ++++++ .../dts/mediatek/mt7988a-bananapi-bpi-r4.dts | 189 ++ arch/arm64/boot/dts/mediatek/mt7988a.dtsi | 54 + drivers/pinctrl/mediatek/Kconfig | 7 + drivers/pinctrl/mediatek/Makefile | 1 + drivers/pinctrl/mediatek/pinctrl-mt7988.c | 1556 +++++++++++++++++ .../pinctrl/mediatek/pinctrl-mtk-common-v2.c | 73 +- .../pinctrl/mediatek/pinctrl-mtk-common-v2.h | 1 + 8 files changed, 2445 insertions(+), 11 deletions(-) create mode 100644 Documentation/devicetree/bindings/pinctrl/mediatek,mt7988-pinctrl.yaml create mode 100644 drivers/pinctrl/mediatek/pinctrl-mt7988.c -- 2.43.0
