On Tue, Apr 7, 2015 at 2:23 PM, Pantelis Antoniou
<pantelis.antoniou@xxxxxxxxxxxx> wrote:
> Implement a number of sysfs attributes for overlays.
>
> * A throw once master enable switch to protect against any
> further overlay applications if the administrator desires so.
This one should be a separate patch.
> * A per overlay targets sysfs attribute listing the targets of
> the installed overlay.
What are targets? "targets lists targets" does not help me. The
documentation doesn't help me either.
> * A per overlay can_remove sysfs attribute that reports whether
> the overlay can be removed or not due to another overlapping overlay.
>
> Signed-off-by: Pantelis Antoniou <pantelis.antoniou@xxxxxxxxxxxx>
> ---
> drivers/of/overlay.c | 167 ++++++++++++++++++++++++++++++++++++++++++++++++++-
> 1 file changed, 166 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/of/overlay.c b/drivers/of/overlay.c
> index f17f5ef..c54d097 100644
> --- a/drivers/of/overlay.c
> +++ b/drivers/of/overlay.c
> @@ -21,6 +21,7 @@
> #include <linux/err.h>
> #include <linux/idr.h>
> #include <linux/sysfs.h>
> +#include <linux/atomic.h>
>
> #include "of_private.h"
>
> @@ -55,8 +56,12 @@ struct of_overlay {
> struct kobject kobj;
> };
>
> +/* master enable switch; once set to 0 can't be re-enabled */
> +static atomic_t ov_enable = ATOMIC_INIT(1);
> +
> static int of_overlay_apply_one(struct of_overlay *ov,
> struct device_node *target, const struct device_node *overlay);
> +static int overlay_removal_is_ok(struct of_overlay *ov);
>
> static int of_overlay_apply_single_property(struct of_overlay *ov,
> struct device_node *target, struct property *prop)
> @@ -345,6 +350,144 @@ static struct kobj_type of_overlay_ktype = {
>
> static struct kset *ov_kset;
>
> +static ssize_t enable_read(struct file *filp, struct kobject *kobj,
> + struct bin_attribute *bin_attr, char *buf,
> + loff_t offset, size_t count)
> +{
> + char tbuf[3];
> +
> + if (offset < 0)
> + return -EINVAL;
> +
> + if (offset >= sizeof(tbuf))
> + return 0;
> +
> + if (count > sizeof(tbuf) - offset)
> + count = sizeof(tbuf) - offset;
> +
> + /* fill in temp */
> + tbuf[0] = '0' + atomic_read(&ov_enable);
> + tbuf[1] = '\n';
> + tbuf[2] = '\0';
> +
> + /* copy to buffer */
> + memcpy(buf, tbuf + offset, count);
> +
> + return count;
> +}
> +
> +static ssize_t enable_write(struct file *filp, struct kobject *kobj,
> + struct bin_attribute *bin_attr, char *buf,
> + loff_t off, size_t count)
> +{
> + unsigned int new_enable;
> +
> + if (off != 0 || (buf[0] != '0' && buf[0] != '1'))
> + return -EINVAL;
> +
> + new_enable = (unsigned int)(buf[0] - '0');
> + if (new_enable > 1)
> + return -EINVAL;
> +
> + /* NOP for same value */
> + if (new_enable == atomic_read(&ov_enable))
> + return count;
> +
> + /* if we've disabled it, no going back */
> + if (atomic_read(&ov_enable) == 0)
> + return -EPERM;
> +
> + atomic_set(&ov_enable, new_enable);
> + return count;
> +}
> +
> +/* just a single char + '\n' + '\0' */
> +static BIN_ATTR_RW(enable, 3);
Why are you using bin attribute? You are complicating the
implementation needlessly.
> +
> +static ssize_t targets_read(struct file *filp, struct kobject *kobj,
> + struct bin_attribute *bin_attr, char *buf,
> + loff_t offset, size_t count)
> +{
> + struct of_overlay *ov = kobj_to_overlay(kobj);
> + struct of_overlay_info *ovinfo;
> + char *tmpbuf, *s, *e;
> + const char *name;
> + ssize_t ret;
> + int i, len;
> +
> + /* allocate work buffer; we know that PAGE_SIZE is enough */
> + tmpbuf = kmalloc(PAGE_SIZE, GFP_KERNEL);
> + if (tmpbuf == NULL)
> + return -ENOMEM;
> +
> + s = tmpbuf;
> + e = tmpbuf + PAGE_SIZE;
> +
> + mutex_lock(&of_mutex);
> +
> + /* targets */
> + for (i = 0; i < ov->count; i++) {
> + ovinfo = &ov->ovinfo_tab[i];
> +
> + name = of_node_full_name(ovinfo->target);
> + len = strlen(name);
> + if (s + len + 1 >= e)
> + return -ENOMEM;
Leaking memory here and holding the mutex.
> + memcpy(s, name, len);
> + s += len;
> + *s++ = '\n';
> + }
> + if (s + 1 >= e)
> + return -ENOMEM;
And here.
> + *s++ = '\0';
> +
> + /* the buffer is zero terminated */
> + len = s - tmpbuf;
> +
> + mutex_unlock(&of_mutex);
> +
> + /* perform the read */
> + ret = memory_read_from_buffer(buf, count, &offset, tmpbuf, len);
> +
> + /* free the temporary buffer */
> + kfree(tmpbuf);
> +
> + return ret;
> +}
> +
> +/* targets property */
> +static BIN_ATTR_RO(targets, PAGE_SIZE);
> +
> +static ssize_t can_remove_read(struct file *filp, struct kobject *kobj,
> + struct bin_attribute *bin_attr, char *buf,
> + loff_t offset, size_t count)
> +{
> + struct of_overlay *ov = kobj_to_overlay(kobj);
> + char tbuf[3];
> +
> + if (offset < 0)
> + return -EINVAL;
> +
> + if (offset >= sizeof(tbuf))
> + return 0;
> +
> + if (count > sizeof(tbuf) - offset)
> + count = sizeof(tbuf) - offset;
> +
> + /* fill in temp */
> + tbuf[0] = '0' + overlay_removal_is_ok(ov);
> + tbuf[1] = '\n';
> + tbuf[2] = '\0';
> +
> + /* copy to buffer */
> + memcpy(buf, tbuf + offset, count);
> +
> + return count;
> +}
> +
> +/* can_remove property */
> +static BIN_ATTR_RO(can_remove, 3);
Same question about bin attr here.
> +
> /**
> * of_overlay_create() - Create and apply an overlay
> * @tree: Device node containing all the overlays
> @@ -360,6 +503,10 @@ int of_overlay_create(struct device_node *tree)
> struct of_overlay *ov;
> int err, id;
>
> + /* administratively disabled */
> + if (!atomic_read(&ov_enable))
> + return -EPERM;
> +
> /* allocate the overlay structure */
> ov = kzalloc(sizeof(*ov), GFP_KERNEL);
> if (ov == NULL)
> @@ -416,6 +563,22 @@ int of_overlay_create(struct device_node *tree)
> goto err_cancel_overlay;
> }
>
> + /* create targets file */
> + err = sysfs_create_bin_file(&ov->kobj, &bin_attr_targets);
> + if (err != 0) {
> + pr_err("%s: sysfs_create_bin_file() failed for tree@%s\n",
> + __func__, tree->full_name);
> + goto err_cancel_overlay;
> + }
> +
> + /* create can_remove file */
> + err = sysfs_create_bin_file(&ov->kobj, &bin_attr_can_remove);
> + if (err != 0) {
> + pr_err("%s: sysfs_create_bin_file() failed for tree@%s\n",
> + __func__, tree->full_name);
> + goto err_cancel_overlay;
> + }
> +
> /* add to the tail of the overlay list */
> list_add_tail(&ov->node, &ov_list);
>
> @@ -596,5 +759,7 @@ int of_overlay_init(void)
> if (!ov_kset)
> return -ENOMEM;
>
> - return 0;
> + rc = sysfs_create_bin_file(&ov_kset->kobj, &bin_attr_enable);
> + WARN(rc, "%s: error adding enable attribute\n", __func__);
> + return rc;
> }
> --
> 1.7.12
>
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
