The patch set initial support Cadence MHDP8501(HDMI/DP) DRM bridge
driver and Cadence HDP-TX PHY(HDMI/DP) driver for Freescale i.MX8MQ.
The patch set compose of DRM bridge drivers and PHY driver.
Both of them need by patch #1 and #3 to pass build.
DRM bridges driver patches:
#1: soc: cadence: Create helper functions for Cadence MHDP
#2: drm: bridge: cadence: Update mhdp8546 mailbox access functions
#3: phy: Add HDMI configuration options
#4: dt-bindings: display: bridge: Add Cadence MHDP8501
#5: drm: bridge: Cadence: Add MHDP8501 DP/HDMI driver
PHY driver patches:
#1: soc: cadence: Create helper functions for Cadence MHDP
#3: phy: Add HDMI configuration options
#6: dt-bindings: phy: Add Freescale iMX8MQ DP and HDMI PHY
#7: phy: freescale: Add DisplayPort/HDMI Combo-PHY driver for i.MX8MQ
i.MX8M/TQMa8Mx DT patches:
#8: Add DT nodes for DCSS/HDMI pipeline
#9: Enable HDMI for TQMa8Mx/MBa8Mx
v19->v20:
Patch #1: soc: cadence: Create helper functions for Cadence MHDP
Patch #2: drm: bridge: cadence: Update mhdp8546 mailbox access functions
- The two patches are split from Patch #1 in v19.
The MHDP helper functions have been moved in a new "cadence" directory
under the SOC directory in patch #1, in order to promote code reuse
among MHDP8546, MHDP8501, and the i.MX8MQ HDMI/DP PHY drivers,
Patch #3: phy: Add HDMI configuration options
- Add a-b tag
Patch #4: dt-bindings: display: bridge: Add Cadence MHDP8501
- remove data type link of data-lanes
Patch #5: drm: bridge: Cadence: Add MHDP8501 DP/HDMI driver
- Dump mhdp FW version by debugfs
- Combine HDMI and DP cable detect functions into one function
- Combine HDMI and DP cable bridge_mode_valid() functions into one function
- Rename cdns_hdmi_reset_link() to cdns_hdmi_handle_hotplug()
- Add comments for EDID in cdns_hdmi_handle_hotplug() and cdns_dp_check_link_state()
- Add atomic_get_input_bus_fmts() and bridge_atomic_check() for DP driver
- Remove bpc and color_fmt init in atomic_enable() function.
- More detail comments for DDC adapter only support SCDC_I2C_SLAVE_ADDRESS
read and write in HDMI driver.
Patch #7: phy: freescale: Add DisplayPort/HDMI Combo-PHY driver for i.MX8MQ
- implify DP configuration handling by directly copying
the configuration options to the driver's internal structure.
- return the error code directly instead of logging an error message in `hdptx_clk_enable`
- Remove redundant ref_clk_rate check
v18->v19:
Patch #1
- use guard(mutex)
- Add kerneldocs for all new APIs.
- Detail comments for mailbox access specific case.
- remove cdns_mhdp_dp_reg_write() because it is not needed by driver now.
Patch #3
- move property data-lanes to endpoint of port@1
Patch #4
- get endpoint for data-lanes as it had move to endpoint of port@1
- update clock management as devm_clk_get_enabled() introduced.
- Fix clear_infoframe() function is not work issue.
- Manage PHY power state via phy_power_on() and phy_power_off().
Patch #6
- Simplify the PLL table by removing unused and constant data
- Remove PHY power management, controller driver will handle them.
- Remove enum dp_link_rate
- introduce read_pll_timeout.
- update clock management as devm_clk_get_enabled() introduced.
- remove cdns_hdptx_phy_init() and cdns_hdptx_phy_remove().
Patch #8:
- move property data-lanes to endpoint of port@1
v17->v18:
Patch #1
- Create three ordinary mailbox access APIs
cdns_mhdp_mailbox_send
cdns_mhdp_mailbox_send_recv
cdns_mhdp_mailbox_send_recv_multi
- Create three secure mailbox access APIs
cdns_mhdp_secure_mailbox_send
cdns_mhdp_secure_mailbox_send_recv
cdns_mhdp_secure_mailbox_send_recv_multi
- MHDP8546 DP and HDCP commands that need access mailbox are rewrited
with above 6 API functions.
Patch #3
- remove lane-mapping and replace it with data-lanes
- remove r-b tag as property changed.
Patch #4
- MHDP8501 HDMI and DP commands that need access mailbox are rewrited
with new API functions created in patch #1.
- replace lane-mapping with data-lanes, use the value from data-lanes
to reorder HDMI and DP lane mapping.
- create I2C adapter for HDMI SCDC, remove cdns_hdmi_scdc_write() function.
- Rewrite cdns_hdmi_sink_config() function, use HDMI SCDC helper function
drm_scdc_set_high_tmds_clock_ratio() and drm_scdc_set_scrambling()
to config HDMI sink TMDS.
- Remove struct video_info from HDMI driver.
- Remove tmds_char_rate_valid() be called in bridge_mode_valid(),
community had patch in reviewing to implement the function.
- Remove warning message print when get unknown HPD cable status.
- Add more detail comments for HDP plugin and plugout interrupt.
- use dev_dbg to repleace DRM_INFO when cable HPD status changed.
- Remove t-b tag as above code change.
Patch #6
- fix build error as code rebase to latest kernel version.
Patch #8:
- replace lane-mapping with data-lanes
v16->v17:
Patch #1:
- Replaces the local mutex mbox_mutex with a global mutex mhdp_mailbox_mutex
Patch #2:
- remove hdmi.h
- add 2024 year to copyright
- Add r-b tag.
Patch #3:
- Add lane-mapping property.
Patch #4:
- Reset the HDMI/DP link when an HPD (Hot Plug Detect) event is detected
- Move the HDMI protocol settings from hdmi_ctrl_init() to a new function
cdns_hdmi_set_hdmi_mode_type(), to align with the introduced link reset functionality.
- Implement logic to check the type of HDMI sink.
If the sink is not a hdmi display, set the default mode to DVI.
- Implement hdmi_reset_infoframe function
- Reorder certain bit definitions in the header file to follow a descending order.
- Add "lane-mapping" property for both HDMI and DP, remove platform data from driver.
lane-mapping should be setting in dts according different board layout.
- Remove variable mode in struct cdns_mhdp8501_device, video mode could get from struct drm_crtc_state
- Remove variable char_rate in struct cdns_mhdp8501_device, it could get from struct struct drm_connector_state.hdmi
- Replaces the local mutex mbox_mutex with a global mutex mhdp_mailbox_mutex
- Remove mutext protect for phy_api access functions.
Patch #6:
- Remove mbox_mutex
v15->v16:
Patch #2:
- Remove pixel_clk_rate, bpc and color_space fields from struct
phy_configure_opts_hdmi, they were replaced by
unsigned long long tmds_char_rate.
- Remove r-b and a-c tags because this patch have important change.
Patch #4:
- Add DRM_BRIDGE_OP_HDMI flags for HDMI driver,
- Introduce the hdmi info frame helper functions,
added hdmi_clear_infoframe(), hdmi_write_infoframe() and
hdmi_tmds_char_rate_valid() according Dmitry's patch
'make use of the HDMI connector infrastructure' patchset ([2]).
- mode_fixup() is replaced by atomic_check().
- Fix video mode 4Kp30 did not work on some displays that support
LTE_340Mcsc_scramble.
- updated for tmds_char_rate added in patch #2.
Patch #6:
- updated for tmds_char_rate added in patch #2.
v14->v15:
Patch #6 + #7:
- Merged PHY driver into a single combo PHY driver
Patch #7 + #8:
- Add DT patches for a running HDMI setup
v13->v14:
Patch #4:
- Rebase to next-20240219, replace get_edid function by edid_read
function as commits d807ad80d811b ("drm/bridge: add ->edid_read
hook and drm_bridge_edid_read()") and 27b8f91c08d99 ("drm/bridge:
remove ->get_edid callback") had change the API.
v12->v13:
Patch #4:
- Explicitly include linux/platform_device.h for cdns-mhdp8501-core.c
- Fix build warning
- Order bit bpc and color_space in descending shit.
Patch #7:
- Fix build warning
v11->v12:
Patch #1:
- Move status initialize out of mbox_mutex.
- Reorder API functions in alphabetical.
- Add notes for malibox access functions.
- Add year 2024 to copyright.
Patch #4:
- Replace DRM_INFO with dev_info or dev_warn.
- Replace DRM_ERROR with dev_err.
- Return ret when cdns_mhdp_dpcd_read failed in function cdns_dp_aux_transferi().
- Remove unused parmeter in function cdns_dp_get_msa_misc
and use two separate variables for color space and bpc.
- Add year 2024 to copyright.
Patch #6:
- Return error code to replace -1 for function wait_for_ack().
- Set cdns_phy->power_up = false in phy_power_down function.
- Remove "RATE_8_1 = 810000", it is not used in driver.
- Add year 2024 to copyright.
Patch #7:
- Adjust clk disable order.
- Return error code to replace -1 for function wait_for_ack().
- Use bool for variable pclk_in.
- Add year 2024 to copyright.
v10->v11:
- rewrite cdns_mhdp_set_firmware_active() in mhdp8546 core driver,
use cdns_mhdp_mailbox_send() to replace cdns_mhdp_mailbox_write()
same as the other mailbox access functions.
- use static for cdns_mhdp_mailbox_write() and cdns_mhdp_mailbox_read()
and remove them from EXPORT_SYMBOL_GPL().
- remove MODULE_ALIAS() from mhdp8501 driver.
v9->v10:
- Create mhdp helper driver to replace macro functions,
move all mhdp mailbox access functions and common functions
into the helper driver.
Patch #1:drm: bridge: Cadence: Creat mhdp helper driver
it is totaly different with v9.
v8->v9:
- Remove compatible string "cdns,mhdp8501" that had removed
from dt-bindings file in v8.
- Add Dmitry's R-b tag to patch #2
- Add Krzysztof's R-b tag to patch #3
v7->v8:
MHDP8501 HDMI/DP:
- Correct DT node name to "display-bridge".
- Remove "cdns,mhdp8501" from mhdp8501 dt-binding doc.
HDMI/DP PHY:
- Introduced functions `wait_for_ack` and `wait_for_ack_clear` to handle
waiting with acknowledgment bits set and cleared respectively.
- Use FIELD_PRE() to set bitfields for both HDMI and DP PHY.
v6->v7:
MHDP8501 HDMI/DP:
- Combine HDMI and DP driver into one mhdp8501 driver.
Use the connector type to load the corresponding functions.
- Remove connector init functions.
- Add <linux/hdmi.h> in phy_hdmi.h to reuse 'enum hdmi_colorspace'.
HDMI/DP PHY:
- Lowercase hex values
- Fix parameters indent issue on some functions
- Replace 'udelay' with 'usleep_range'
v5->v6:
HDMI/DP bridge driver
- 8501 is the part number of Cadence MHDP on i.MX8MQ.
Use MHDP8501 to name hdmi/dp drivers and files.
- Add compatible "fsl,imx8mq-mhdp8501-dp" for i.MX8MQ DP driver
- Add compatible "fsl,imx8mq-mhdp8501-hdmi" for i.MX8MQ HDMI driver
- Combine HDMI and DP dt-bindings into one file cdns,mhdp8501.yaml
- Fix HDMI scrambling is not enable issue when driver working in 4Kp60
mode.
- Add HDMI/DP PHY API mailbox protect.
HDMI/DP PHY driver:
- Rename DP and HDMI PHY files and move to folder phy/freescale/
- Remove properties num_lanes and link_rate from DP PHY driver.
- Combine HDMI and DP dt-bindings into one file fsl,imx8mq-dp-hdmi-phy.yaml
- Update compatible string to "fsl,imx8mq-dp-phy".
- Update compatible string to "fsl,imx8mq-hdmi-phy".
v4->v5:
- Drop "clk" suffix in clock name.
- Add output port property in the example of hdmi/dp.
v3->v4:
dt-bindings:
- Correct dt-bindings coding style and address review comments.
- Add apb_clk description.
- Add output port for HDMI/DP connector
PHY:
- Alphabetically sorted in Kconfig and Makefile for DP and HDMI PHY
- Remove unused registers define from HDMI and DP PHY drivers.
- More description in phy_hdmi.h.
- Add apb_clk to HDMI and DP phy driver.
HDMI/DP:
- Use get_unaligned_le32() to replace hardcode type conversion
in HDMI AVI infoframe data fill function.
- Add mailbox mutex lock in HDMI/DP driver for phy functions
to reslove race conditions between HDMI/DP and PHY drivers.
- Add apb_clk to both HDMI and DP driver.
- Rename some function names and add prefix with "cdns_hdmi/cdns_dp".
- Remove bpc 12 and 16 optional that not supported.
v2->v3:
Address comments for dt-bindings files.
- Correct dts-bindings file names
Rename phy-cadence-hdptx-dp.yaml to cdns,mhdp-imx8mq-dp.yaml
Rename phy-cadence-hdptx-hdmi.yaml to cdns,mhdp-imx8mq-hdmi.yaml
- Drop redundant words and descriptions.
- Correct hdmi/dp node name.
v2 is a completely different version compared to v1.
Previous v1 can be available here [1].
v1->v2:
- Reuse Cadence mailbox access functions from mhdp8546 instead of
rockchip DP.
- Mailbox access functions be convert to marco functions
that will be referenced by HDP-TX PHY(HDMI/DP) driver too.
- Plain bridge instead of component driver.
- Standalone Cadence HDP-TX PHY(HDMI/DP) driver.
- Audio driver are removed from the patch set, it will be add in another
patch set later.
[1] https://patchwork.kernel.org/project/linux-rockchip/cover/cover.1590982881.git.Sandor.yu@xxxxxxx/
Alexander Stein (2):
arm64: dts: imx8mq: Add DCSS + HDMI/DP display pipeline
arm64: dts: imx8mq: tqma8mq-mba8mx: Enable HDMI support
Sandor Yu (7):
soc: cadence: Create helper functions for Cadence MHDP
drm: bridge: cadence: Update mhdp8546 mailbox access functions
phy: Add HDMI configuration options
dt-bindings: display: bridge: Add Cadence MHDP8501
drm: bridge: Cadence: Add MHDP8501 DP/HDMI driver
dt-bindings: phy: Add Freescale iMX8MQ DP and HDMI PHY
phy: freescale: Add DisplayPort/HDMI Combo-PHY driver for i.MX8MQ
.../display/bridge/cdns,mhdp8501.yaml | 121 ++
.../bindings/phy/fsl,imx8mq-dp-hdmi-phy.yaml | 51 +
.../dts/freescale/imx8mq-tqma8mq-mba8mx.dts | 26 +
arch/arm64/boot/dts/freescale/imx8mq.dtsi | 68 +
arch/arm64/boot/dts/freescale/mba8mx.dtsi | 11 +
drivers/gpu/drm/bridge/cadence/Kconfig | 17 +
drivers/gpu/drm/bridge/cadence/Makefile | 2 +
.../drm/bridge/cadence/cdns-mhdp8501-core.c | 379 +++++
.../drm/bridge/cadence/cdns-mhdp8501-core.h | 380 +++++
.../gpu/drm/bridge/cadence/cdns-mhdp8501-dp.c | 694 ++++++++++
.../drm/bridge/cadence/cdns-mhdp8501-hdmi.c | 745 ++++++++++
.../drm/bridge/cadence/cdns-mhdp8546-core.c | 487 ++-----
.../drm/bridge/cadence/cdns-mhdp8546-core.h | 47 +-
.../drm/bridge/cadence/cdns-mhdp8546-hdcp.c | 212 +--
.../drm/bridge/cadence/cdns-mhdp8546-hdcp.h | 18 +-
drivers/phy/freescale/Kconfig | 10 +
drivers/phy/freescale/Makefile | 1 +
drivers/phy/freescale/phy-fsl-imx8mq-hdptx.c | 1231 +++++++++++++++++
drivers/soc/Kconfig | 1 +
drivers/soc/Makefile | 1 +
drivers/soc/cadence/Kconfig | 9 +
drivers/soc/cadence/Makefile | 3 +
drivers/soc/cadence/cdns-mhdp-helper.c | 565 ++++++++
include/linux/phy/phy-hdmi.h | 19 +
include/linux/phy/phy.h | 7 +-
include/soc/cadence/cdns-mhdp-helper.h | 129 ++
26 files changed, 4572 insertions(+), 662 deletions(-)
create mode 100644 Documentation/devicetree/bindings/display/bridge/cdns,mhdp8501.yaml
create mode 100644 Documentation/devicetree/bindings/phy/fsl,imx8mq-dp-hdmi-phy.yaml
create mode 100644 drivers/gpu/drm/bridge/cadence/cdns-mhdp8501-core.c
create mode 100644 drivers/gpu/drm/bridge/cadence/cdns-mhdp8501-core.h
create mode 100644 drivers/gpu/drm/bridge/cadence/cdns-mhdp8501-dp.c
create mode 100644 drivers/gpu/drm/bridge/cadence/cdns-mhdp8501-hdmi.c
create mode 100644 drivers/phy/freescale/phy-fsl-imx8mq-hdptx.c
create mode 100644 drivers/soc/cadence/Kconfig
create mode 100644 drivers/soc/cadence/Makefile
create mode 100644 drivers/soc/cadence/cdns-mhdp-helper.c
create mode 100644 include/linux/phy/phy-hdmi.h
create mode 100644 include/soc/cadence/cdns-mhdp-helper.h
--
2.34.1
