From: Tomi Valkeinen <tomi.valkeinen+renesas@xxxxxxxxxxxxxxxx>
Add support for r8a779h0. It is very similar to r8a779g0, but has only
one output.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen+renesas@xxxxxxxxxxxxxxxx>
Tested-by: Geert Uytterhoeven <geert+renesas@xxxxxxxxx>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@xxxxxxxxxxxxxxxx>
---
drivers/gpu/drm/renesas/rcar-du/rcar_du_drv.c | 18 ++++++++++++++++++
drivers/gpu/drm/renesas/rcar-du/rcar_du_group.c | 4 +++-
2 files changed, 21 insertions(+), 1 deletion(-)
diff --git a/drivers/gpu/drm/renesas/rcar-du/rcar_du_drv.c b/drivers/gpu/drm/renesas/rcar-du/rcar_du_drv.c
index fb719d9aff10..7858e10839f2 100644
--- a/drivers/gpu/drm/renesas/rcar-du/rcar_du_drv.c
+++ b/drivers/gpu/drm/renesas/rcar-du/rcar_du_drv.c
@@ -545,6 +545,23 @@ static const struct rcar_du_device_info rcar_du_r8a779g0_info = {
.dsi_clk_mask = BIT(1) | BIT(0),
};
+static const struct rcar_du_device_info rcar_du_r8a779h0_info = {
+ .gen = 4,
+ .features = RCAR_DU_FEATURE_CRTC_IRQ
+ | RCAR_DU_FEATURE_VSP1_SOURCE
+ | RCAR_DU_FEATURE_NO_BLENDING,
+ .channels_mask = BIT(0),
+ .routes = {
+ /* R8A779H0 has one MIPI DSI output. */
+ [RCAR_DU_OUTPUT_DSI0] = {
+ .possible_crtcs = BIT(0),
+ .port = 0,
+ },
+ },
+ .num_rpf = 5,
+ .dsi_clk_mask = BIT(0),
+};
+
static const struct of_device_id rcar_du_of_table[] = {
{ .compatible = "renesas,du-r8a7742", .data = &rcar_du_r8a7790_info },
{ .compatible = "renesas,du-r8a7743", .data = &rzg1_du_r8a7743_info },
@@ -571,6 +588,7 @@ static const struct of_device_id rcar_du_of_table[] = {
{ .compatible = "renesas,du-r8a77995", .data = &rcar_du_r8a7799x_info },
{ .compatible = "renesas,du-r8a779a0", .data = &rcar_du_r8a779a0_info },
{ .compatible = "renesas,du-r8a779g0", .data = &rcar_du_r8a779g0_info },
+ { .compatible = "renesas,du-r8a779h0", .data = &rcar_du_r8a779h0_info },
{ }
};
diff --git a/drivers/gpu/drm/renesas/rcar-du/rcar_du_group.c b/drivers/gpu/drm/renesas/rcar-du/rcar_du_group.c
index 1ec806c8e013..068c106e586c 100644
--- a/drivers/gpu/drm/renesas/rcar-du/rcar_du_group.c
+++ b/drivers/gpu/drm/renesas/rcar-du/rcar_du_group.c
@@ -107,10 +107,12 @@ static void rcar_du_group_setup_didsr(struct rcar_du_group *rgrp)
*/
rcrtc = rcdu->crtcs;
num_crtcs = rcdu->num_crtcs;
- } else if (rcdu->info->gen >= 3 && rgrp->num_crtcs > 1) {
+ } else if ((rcdu->info->gen == 3 && rgrp->num_crtcs > 1) ||
+ rcdu->info->gen == 4) {
/*
* On Gen3 dot clocks are setup through per-group registers,
* only available when the group has two channels.
+ * On Gen4 the registers are there for single channel too.
*/
rcrtc = &rcdu->crtcs[rgrp->index * 2];
num_crtcs = rgrp->num_crtcs;
--
2.43.0
