TCON0 seems to need a different clock parent depending on output type.
For RGB it has to be PLL-VIDEO0-2X, while for DSI it has to be PLL-MIPI
Video output doesn't work if incorrect clock is assigned.
On my Pinebook I manually configured PLL-VIDEO0-2X and PLL-MIPI to the same
rate, and while video output works fine with PLL-VIDEO0-2X, it doesn't
work at all (as in no picture) with PLL-MIPI.
Fixes: ca1170b69968 ("clk: sunxi-ng: a64: force select PLL_MIPI in TCON0 mux")
Signed-off-by: Vasily Khoruzhick <anarsoul@xxxxxxxxx>
---
arch/arm64/boot/dts/allwinner/sun50i-a64-pinebook.dts | 2 ++
arch/arm64/boot/dts/allwinner/sun50i-a64-teres-i.dts | 2 ++
arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi | 2 ++
3 files changed, 6 insertions(+)
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-pinebook.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-pinebook.dts
index 379c2c8466f5..86d44349e095 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-a64-pinebook.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-pinebook.dts
@@ -390,6 +390,8 @@ &sound {
&tcon0 {
pinctrl-names = "default";
pinctrl-0 = <&lcd_rgb666_pins>;
+ assigned-clocks = <&ccu CLK_TCON0>;
+ assigned-clock-parents = <&ccu CLK_PLL_VIDEO0_2X>;
status = "okay";
};
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-teres-i.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-teres-i.dts
index b407e1dd08a7..ec055510af8b 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-a64-teres-i.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-teres-i.dts
@@ -369,6 +369,8 @@ &sound {
&tcon0 {
pinctrl-names = "default";
pinctrl-0 = <&lcd_rgb666_pins>;
+ assigned-clocks = <&ccu CLK_TCON0>;
+ assigned-clock-parents = <&ccu CLK_PLL_VIDEO0_2X>;
status = "okay";
};
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi
index a5c3920e0f04..0fecf0abb204 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi
+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi
@@ -445,6 +445,8 @@ tcon0: lcd-controller@1c0c000 {
clock-names = "ahb", "tcon-ch0";
clock-output-names = "tcon-data-clock";
#clock-cells = <0>;
+ assigned-clocks = <&ccu CLK_TCON0>;
+ assigned-clock-parents = <&ccu CLK_PLL_MIPI>;
resets = <&ccu RST_BUS_TCON0>, <&ccu RST_BUS_LVDS>;
reset-names = "lcd", "lvds";
--
2.47.1
