Add support for getting the interface (CMOS or LVDS) used by the AXI ADC IP. Reviewed-by: David Lechner <dlechner@xxxxxxxxxxxx> Signed-off-by: Antoniu Miclaus <antoniu.miclaus@xxxxxxxxxx> --- no changes in v8. drivers/iio/adc/adi-axi-adc.c | 23 +++++++++++++++++++++++ 1 file changed, 23 insertions(+) diff --git a/drivers/iio/adc/adi-axi-adc.c b/drivers/iio/adc/adi-axi-adc.c index 5c8c87eb36d1..f6475bc93796 100644 --- a/drivers/iio/adc/adi-axi-adc.c +++ b/drivers/iio/adc/adi-axi-adc.c @@ -39,6 +39,9 @@ #define ADI_AXI_REG_RSTN_MMCM_RSTN BIT(1) #define ADI_AXI_REG_RSTN_RSTN BIT(0) +#define ADI_AXI_ADC_REG_CONFIG 0x000c +#define ADI_AXI_ADC_REG_CONFIG_CMOS_OR_LVDS_N BIT(7) + #define ADI_AXI_ADC_REG_CTRL 0x0044 #define ADI_AXI_ADC_CTRL_DDR_EDGESEL_MASK BIT(1) @@ -290,6 +293,25 @@ static int axi_adc_chan_disable(struct iio_backend *back, unsigned int chan) ADI_AXI_REG_CHAN_CTRL_ENABLE); } +static int axi_adc_interface_type_get(struct iio_backend *back, + enum iio_backend_interface_type *type) +{ + struct adi_axi_adc_state *st = iio_backend_get_priv(back); + unsigned int val; + int ret; + + ret = regmap_read(st->regmap, ADI_AXI_ADC_REG_CONFIG, &val); + if (ret) + return ret; + + if (val & ADI_AXI_ADC_REG_CONFIG_CMOS_OR_LVDS_N) + *type = IIO_BACKEND_INTERFACE_SERIAL_CMOS; + else + *type = IIO_BACKEND_INTERFACE_SERIAL_LVDS; + + return 0; +} + static struct iio_buffer *axi_adc_request_buffer(struct iio_backend *back, struct iio_dev *indio_dev) { @@ -337,6 +359,7 @@ static const struct iio_backend_ops adi_axi_adc_ops = { .iodelay_set = axi_adc_iodelays_set, .test_pattern_set = axi_adc_test_pattern_set, .chan_status = axi_adc_chan_status, + .interface_type_get = axi_adc_interface_type_get, .debugfs_reg_access = iio_backend_debugfs_ptr(axi_adc_reg_access), .debugfs_print_chan_status = iio_backend_debugfs_ptr(axi_adc_debugfs_print_chan_status), }; -- 2.47.1