From: NINAD PALSULE <ninadpalsule@xxxxxxxxxx>
Removing voltage regulators max8952 from device tree. Those are fully
controlled by hardware and firmware should not thouch them.
Signed-off-by: Ninad Palsule <ninad@xxxxxxxxxxxxx>
---
.../dts/aspeed/aspeed-bmc-ibm-system1.dts | 34 -------------------
1 file changed, 34 deletions(-)
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-system1.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-system1.dts
index 149b9ad23dbb..ca2d4a292687 100644
--- a/arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-system1.dts
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-system1.dts
@@ -514,23 +514,6 @@ eeprom@50 {
compatible = "atmel,24c64";
reg = <0x50>;
};
-
- regulator@60 {
- compatible = "maxim,max8952";
- reg = <0x60>;
-
- max8952,default-mode = <0>;
- max8952,dvs-mode-microvolt = <1250000>, <1200000>,
- <1050000>, <950000>;
- max8952,sync-freq = <0>;
- max8952,ramp-speed = <0>;
-
- regulator-name = "VR_v77_1v4";
- regulator-min-microvolt = <770000>;
- regulator-max-microvolt = <1400000>;
- regulator-always-on;
- regulator-boot-on;
- };
};
&i2c1 {
@@ -1227,23 +1210,6 @@ eeprom@50 {
compatible = "atmel,24c64";
reg = <0x50>;
};
-
- regulator@60 {
- compatible = "maxim,max8952";
- reg = <0x60>;
-
- max8952,default-mode = <0>;
- max8952,dvs-mode-microvolt = <1250000>, <1200000>,
- <1050000>, <950000>;
- max8952,sync-freq = <0>;
- max8952,ramp-speed = <0>;
-
- regulator-name = "VR_v77_1v4";
- regulator-min-microvolt = <770000>;
- regulator-max-microvolt = <1400000>;
- regulator-always-on;
- regulator-boot-on;
- };
};
&i2c11 {
--
2.43.0
