Add dtschema for the MDIO controller found in the RTL9300 SoCs. The controller is slightly unusual in that direct MDIO communication is not possible. Instead, the SMI bus and PHY address are associated with a switch port and the port number is used when talking to the PHY. Signed-off-by: Chris Packham <chris.packham@xxxxxxxxxxxxxxxxxxx> --- .../bindings/net/realtek,rtl9301-mdio.yaml | 82 +++++++++++++++++++ 1 file changed, 82 insertions(+) create mode 100644 Documentation/devicetree/bindings/net/realtek,rtl9301-mdio.yaml diff --git a/Documentation/devicetree/bindings/net/realtek,rtl9301-mdio.yaml b/Documentation/devicetree/bindings/net/realtek,rtl9301-mdio.yaml new file mode 100644 index 000000000000..95ed77ff8dcc --- /dev/null +++ b/Documentation/devicetree/bindings/net/realtek,rtl9301-mdio.yaml @@ -0,0 +1,82 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/net/realtek,rtl9301-mdio.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Realtek RTL9300 MDIO Controller + +maintainers: + - Chris Packham <chris.packham@xxxxxxxxxxxxxxxxxxx> + +allOf: + - $ref: mdio.yaml# + +properties: + compatible: + oneOf: + - items: + - enum: + - realtek,rtl9302b-mdio + - realtek,rtl9302c-mdio + - realtek,rtl9303-mdio + - const: realtek,rtl9301-mdio + - const: realtek,rtl9301-mdio + + '#address-cells': + const: 1 + + '#size-cells': + const: 0 + + reg: + maxItems: 1 + +patternProperties: + '^ethernet-phy(@[a-f0-9]+)?': + type: object + $ref: ethernet-phy.yaml# + + properties: + reg: + description: + The MDIO communication on the RTL9300 is abstracted by the switch. At + the software level communication uses the switch port to address the + PHY with the actual MDIO bus and address having been setup via the + realtek,smi-address property. + + realtek,smi-address: + $ref: /schemas/types.yaml#/definitions/uint32-array + description: SMI interface and address for the connected PHY + items: + - description: SMI interface number associated with the port. + - description: SMI address of the PHY for the port. + + unevaluatedProperties: false + +required: + - compatible + - reg + +unevaluatedProperties: false + +examples: + - | + mdio@ca00 { + compatible = "realtek,rtl9301-mdio"; + reg = <0xca00 0x200>; + #address-cells = <1>; + #size-cells = <0>; + + ethernet-phy@0 { + compatible = "ethernet-phy-ieee802.3-c45"; + reg = <0>; + realtek,smi-address = <0 1>; + }; + + ethernet-phy@8 { + compatible = "ethernet-phy-ieee802.3-c45"; + reg = <8>; + realtek,smi-address = <1 1>; + }; + }; -- 2.47.1
