On Wed, 11 Dec 2024 17:50:50 +0100, Iker Pedrosa wrote: > The current documentation does not clearly explain how to invert the SPI > CS signal to make it active-high. This makes it very difficult to > understand. > > This patch adds a simple explanation on how to set the CS line in > active-high and adds an example to make it easier for users who need > that setup for their SPI peripherals. > > Link: https://forums.raspberrypi.com/viewtopic.php?t=378222 > Signed-off-by: Iker Pedrosa <ikerpedrosam@xxxxxxxxx> > --- > .../bindings/spi/spi-controller.yaml | 25 +++++++++++++++++++ > 1 file changed, 25 insertions(+) > My bot found errors running 'make dt_binding_check' on your patch: yamllint warnings/errors: dtschema/dtc warnings/errors: Documentation/devicetree/bindings/spi/spi-controller.example.dtb: /example-1/spi@20204000/display@0: failed to match any schema with compatible: ['sitronix,st7920'] doc reference errors (make refcheckdocs): See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20241211165054.254164-1-ikerpedrosam@xxxxxxxxx The base for the series is generally the latest rc1. A different dependency should be noted in *this* patch. If you already ran 'make dt_binding_check' and didn't see the above error(s), then make sure 'yamllint' is installed and dt-schema is up to date: pip3 install dtschema --upgrade Please check and re-submit after running the above command yourself. Note that DT_SCHEMA_FILES can be set to your schema file to speed up checking your schema. However, it must be unset to test all examples with your schema.
