Add an initial devicetree for the Huawei Matebook E Go, which is based on sc8280xp. There are 3 variants, Huawei released first 2 at the same time. Huawei Matebook E Go LTE(sc8180x), codename should be gaokun2. Huawei Matebook E Go(sc8280xp@3.0GHz), codename is gaokun3. Huawei Matebook E Go 2023(sc8280xp@2.69GHz). We add support for the latter two variants. This work started by Tianyu Gao and Xuecong Chen, they made the devicetree based on existing work(i.e. the Lenovo X13s and the Qualcomm CRD), it can boot with framebuffer. Original work: https://github.com/matalama80td3l/matebook-e-go-boot-works/blob/main/dts/sc8280xp-huawei-matebook-e-go.dts Later, I got my device, I continue their work. Supported features: - adsp - bluetooth (connect issue) - charge (with a lower power) - framebuffer - gpu - keyboard (via internal USB) - pcie devices (wifi and nvme, no modem) - speakers and microphones - tablet mode switch - touchscreen - usb - volume key and power key Some key features not supported yet: - battery and charger information report (EC driver required) - built-in display (cannot enable backlight yet) - charging thresholds control (EC driver required) - camera - LID switch detection (EC driver required) - USB Type-C altmode (EC driver required) - USB Type-C PD (EC driver required) I have finished the EC driver, once this series are upstreamed, I will submit a series of patches to enable EC support. Signed-off-by: Tianyu Gao <gty0622@xxxxxxxxx> Signed-off-by: Xuecong Chen <chenxuecong2009@xxxxxxxxxxx> Signed-off-by: Pengyu Luo <mitltlatltl@xxxxxxxxx> --- arch/arm64/boot/dts/qcom/Makefile | 1 + .../boot/dts/qcom/sc8280xp-huawei-gaokun3.dts | 1332 +++++++++++++++++ 2 files changed, 1333 insertions(+) create mode 100644 arch/arm64/boot/dts/qcom/sc8280xp-huawei-gaokun3.dts diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile index 6ca8db4b8..00d02cf5f 100644 --- a/arch/arm64/boot/dts/qcom/Makefile +++ b/arch/arm64/boot/dts/qcom/Makefile @@ -195,6 +195,7 @@ dtb-$(CONFIG_ARCH_QCOM) += sc7280-crd-r3.dtb dtb-$(CONFIG_ARCH_QCOM) += sc8180x-lenovo-flex-5g.dtb dtb-$(CONFIG_ARCH_QCOM) += sc8180x-primus.dtb dtb-$(CONFIG_ARCH_QCOM) += sc8280xp-crd.dtb +dtb-$(CONFIG_ARCH_QCOM) += sc8280xp-huawei-gaokun3.dtb dtb-$(CONFIG_ARCH_QCOM) += sc8280xp-lenovo-thinkpad-x13s.dtb dtb-$(CONFIG_ARCH_QCOM) += sc8280xp-microsoft-arcata.dtb dtb-$(CONFIG_ARCH_QCOM) += sda660-inforce-ifc6560.dtb diff --git a/arch/arm64/boot/dts/qcom/sc8280xp-huawei-gaokun3.dts b/arch/arm64/boot/dts/qcom/sc8280xp-huawei-gaokun3.dts new file mode 100644 index 000000000..98732754e --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sc8280xp-huawei-gaokun3.dts @@ -0,0 +1,1332 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2021, The Linux Foundation. All rights reserved. + * Copyright (c) 2022, Linaro Limited + * + * Copyright (c) 2024, Tianyu Gao <gty0622@xxxxxxxxx> + * Copyright (c) 2024, Xuecong Chen <chenxuecong2009@xxxxxxxxxxx> + * + * Copyright (c) 2024, Pengyu Luo <mitltlatltl@xxxxxxxxx> + */ + +/dts-v1/; + +#include <dt-bindings/iio/qcom,spmi-adc7-pm8350.h> +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/gpio-keys.h> +#include <dt-bindings/input/input.h> +#include <dt-bindings/regulator/qcom,rpmh-regulator.h> +#include <dt-bindings/phy/phy.h> + +#include "sc8280xp.dtsi" +#include "sc8280xp-pmics.dtsi" + +/ { + chassis-type = "tablet"; + model = "Matebook E Go"; + compatible = "huawei,gaokun3", "qcom,sc8280xp"; + + aliases { + i2c4 = &i2c4; + serial1 = &uart2; + }; + + chosen { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + framebuffer0: framebuffer@c6200000 { + compatible = "simple-framebuffer"; + reg = <0x0 0xC6200000 0x0 0x02400000>; + width = <1600>; + height = <2560>; + stride = <(1600 * 4)>; + format = "a8r8g8b8"; + }; + }; + + wcd938x: audio-codec { + compatible = "qcom,wcd9380-codec"; + + pinctrl-names = "default"; + pinctrl-0 = <&wcd_default>; + + reset-gpios = <&tlmm 106 GPIO_ACTIVE_LOW>; + + vdd-buck-supply = <&vreg_s10b>; + vdd-rxtx-supply = <&vreg_s10b>; + vdd-io-supply = <&vreg_s10b>; + vdd-mic-bias-supply = <&vreg_bob>; + + qcom,micbias1-microvolt = <1800000>; + qcom,micbias2-microvolt = <1800000>; + qcom,micbias3-microvolt = <1800000>; + qcom,micbias4-microvolt = <1800000>; + qcom,mbhc-buttons-vthreshold-microvolt = <75000 150000 237000 500000 500000 500000 500000 500000>; + qcom,mbhc-headset-vthreshold-microvolt = <1700000>; + qcom,mbhc-headphone-vthreshold-microvolt = <50000>; + qcom,rx-device = <&wcd_rx>; + qcom,tx-device = <&wcd_tx>; + + #sound-dai-cells = <1>; + }; + + gpio-keys { + compatible = "gpio-keys"; + + pinctrl-names = "default"; + pinctrl-0 = <&mode_pin_active>, <&vol_up_n>; + + switch-mode { + gpios = <&tlmm 26 GPIO_ACTIVE_HIGH>; + linux,input-type = <EV_SW>; + linux,code = <SW_TABLET_MODE>; + debounce-interval = <10>; + wakeup-source; + }; + + key-vol-up { + label = "Volume Up"; + gpios = <&pmc8280_1_gpios 6 GPIO_ACTIVE_LOW>; + linux,code = <KEY_VOLUMEUP>; + debounce-interval = <15>; + linux,can-disable; + wakeup-source; + }; + + }; + + vreg_misc_3p3: regulator-misc-3p3 { + compatible = "regulator-fixed"; + + regulator-name = "VCC3B"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + gpio = <&pmc8280_1_gpios 1 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-names = "default"; + pinctrl-0 = <&misc_3p3_reg_en>; + + regulator-boot-on; + regulator-always-on; + }; + + vreg_nvme: regulator-nvme { + compatible = "regulator-fixed"; + + regulator-name = "VCC3_SSD"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + gpio = <&tlmm 135 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-names = "default"; + pinctrl-0 = <&nvme_reg_en>; + + regulator-boot-on; + }; + + vreg_vph_pwr: regulator-vph-pwr { + compatible = "regulator-fixed"; + + regulator-name = "VPH_VCC3R9"; + regulator-min-microvolt = <3900000>; + regulator-max-microvolt = <3900000>; + + regulator-always-on; + }; + + vreg_wlan: regulator-wlan { + compatible = "regulator-fixed"; + + regulator-name = "VCC_WLAN_3R9"; + regulator-min-microvolt = <3900000>; + regulator-max-microvolt = <3900000>; + + gpio = <&pmr735a_gpios 1 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-names = "default"; + pinctrl-0 = <&hastings_reg_en>; + + regulator-boot-on; + }; + + reserved-memory { + gpu_mem: gpu-mem@8bf00000 { + reg = <0 0x8bf00000 0 0x2000>; + no-map; + }; + + linux,cma { + compatible = "shared-dma-pool"; + size = <0x0 0x8000000>; + reusable; + linux,cma-default; + }; + }; + + thermal-zones { + skin-temp-thermal { + polling-delay-passive = <250>; + + thermal-sensors = <&pmk8280_adc_tm 5>; + + trips { + skin_temp_alert0: trip-point0 { + temperature = <55000>; + hysteresis = <1000>; + type = "passive"; + }; + + skin_temp_alert1: trip-point1 { + temperature = <58000>; + hysteresis = <1000>; + type = "passive"; + }; + + skin-temp-crit { + temperature = <73000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + + cooling-maps { + map0 { + trip = <&skin_temp_alert0>; + cooling-device = <&cpu4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + + map1 { + trip = <&skin_temp_alert1>; + cooling-device = <&cpu4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + }; + }; + + wcn6855-pmu { + compatible = "qcom,wcn6855-pmu"; + + pinctrl-0 = <&bt_default>, <&wlan_en>; + pinctrl-names = "default"; + + wlan-enable-gpios = <&tlmm 134 GPIO_ACTIVE_HIGH>; + bt-enable-gpios = <&tlmm 133 GPIO_ACTIVE_HIGH>; + swctrl-gpios = <&tlmm 132 GPIO_ACTIVE_HIGH>; + + vddio-supply = <&vreg_s10b>; + vddaon-supply = <&vreg_s12b>; + vddpmu-supply = <&vreg_s12b>; + vddpmumx-supply = <&vreg_s12b>; + vddpmucx-supply = <&vreg_s12b>; + vddrfa0p95-supply = <&vreg_s12b>; + vddrfa1p3-supply = <&vreg_s11b>; + vddrfa1p9-supply = <&vreg_s1c>; + vddpcie1p3-supply = <&vreg_s11b>; + vddpcie1p9-supply = <&vreg_s1c>; + + regulators { + vreg_pmu_rfa_cmn_0p8: ldo0 { + regulator-name = "vreg_pmu_rfa_cmn_0p8"; + }; + + vreg_pmu_aon_0p8: ldo1 { + regulator-name = "vreg_pmu_aon_0p8"; + }; + + vreg_pmu_wlcx_0p8: ldo2 { + regulator-name = "vreg_pmu_wlcx_0p8"; + }; + + vreg_pmu_wlmx_0p8: ldo3 { + regulator-name = "vreg_pmu_wlmx_0p8"; + }; + + vreg_pmu_btcmx_0p8: ldo4 { + regulator-name = "vreg_pmu_btcmx_0p8"; + }; + + vreg_pmu_pcie_1p8: ldo5 { + regulator-name = "vreg_pmu_pcie_1p8"; + }; + + vreg_pmu_pcie_0p9: ldo6 { + regulator-name = "vreg_pmu_pcie_0p9"; + }; + + vreg_pmu_rfa_0p8: ldo7 { + regulator-name = "vreg_pmu_rfa_0p8"; + }; + + vreg_pmu_rfa_1p2: ldo8 { + regulator-name = "vreg_pmu_rfa_1p2"; + }; + + vreg_pmu_rfa_1p7: ldo9 { + regulator-name = "vreg_pmu_rfa_1p7"; + }; + }; + }; +}; + +&apps_rsc { + regulators-0 { + compatible = "qcom,pm8350-rpmh-regulators"; + qcom,pmic-id = "b"; + + vdd-l1-l4-supply = <&vreg_s12b>; + vdd-l2-l7-supply = <&vreg_bob>; + vdd-l3-l5-supply = <&vreg_s11b>; + vdd-l6-l9-l10-supply = <&vreg_s12b>; + vdd-l8-supply = <&vreg_s12b>; + + vreg_s10b: smps10 { + regulator-name = "vreg_s10b"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-always-on; + }; + + vreg_s11b: smps11 { + regulator-name = "vreg_s11b"; + regulator-min-microvolt = <1272000>; + regulator-max-microvolt = <1272000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_s12b: smps12 { + regulator-name = "vreg_s12b"; + regulator-min-microvolt = <984000>; + regulator-max-microvolt = <984000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l1b: ldo1 { + regulator-name = "vreg_l1b"; + regulator-min-microvolt = <912000>; + regulator-max-microvolt = <912000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l2b: ldo2 { + regulator-name = "vreg_l2b"; + regulator-min-microvolt = <1904000>; + regulator-max-microvolt = <1904000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l3b: ldo3 { + regulator-name = "vreg_l3b"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-boot-on; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l4b: ldo4 { + regulator-name = "vreg_l4b"; + regulator-min-microvolt = <912000>; + regulator-max-microvolt = <912000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l5b: ldo5 { + regulator-name = "vreg_l5b"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l6b: ldo6 { + regulator-name = "vreg_l6b"; + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <880000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-boot-on; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l7b: ldo7 { + regulator-name = "vreg_l7b"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-boot-on; + }; + + vreg_l9b: ldo9 { + regulator-name = "vreg_l9b"; + regulator-min-microvolt = <912000>; + regulator-max-microvolt = <912000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + }; + + regulators-1 { + compatible = "qcom,pm8350c-rpmh-regulators"; + qcom,pmic-id = "c"; + + vdd-bob-supply = <&vreg_vph_pwr>; + vdd-l1-l12-supply = <&vreg_s1c>; + vdd-l2-l8-supply = <&vreg_s1c>; + vdd-l3-l4-l5-l7-l13-supply = <&vreg_bob>; + vdd-l6-l9-l11-supply = <&vreg_bob>; + vdd-l10-supply = <&vreg_s11b>; + + vreg_s1c: smps1 { + regulator-name = "vreg_s1c"; + regulator-min-microvolt = <1880000>; + regulator-max-microvolt = <1900000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-always-on; + }; + + /* s2c, s3c */ + + vreg_l1c: ldo1 { + regulator-name = "vreg_l1c"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l2c: ldo2 { + regulator-name = "vreg_l2c"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l8c: ldo8 { + regulator-name = "vreg_l8c"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l12c: ldo12 { + regulator-name = "vreg_l12c"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l13c: ldo13 { + regulator-name = "vreg_l13c"; + regulator-min-microvolt = <3072000>; + regulator-max-microvolt = <3072000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_bob: bob { + regulator-name = "vreg_bob"; + regulator-min-microvolt = <3008000>; + regulator-max-microvolt = <3960000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_AUTO>; + regulator-always-on; + }; + }; + + regulators-2 { + compatible = "qcom,pm8350-rpmh-regulators"; + qcom,pmic-id = "d"; + + vdd-l1-l4-supply = <&vreg_s11b>; + vdd-l2-l7-supply = <&vreg_bob>; + vdd-l3-l5-supply = <&vreg_s11b>; + vdd-l6-l9-l10-supply = <&vreg_s12b>; + vdd-l8-supply = <&vreg_s12b>; + + /* s10d, s11d, s12d */ + + vreg_l2d: ldo2 { + regulator-name = "vreg_l2d"; + regulator-min-microvolt = <3072000>; + regulator-max-microvolt = <3072000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l3d: ldo3 { + regulator-name = "vreg_l3d"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l4d: ldo4 { + regulator-name = "vreg_l4d"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l6d: ldo6 { + regulator-name = "vreg_l6d"; + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <880000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l7d: ldo7 { + regulator-name = "vreg_l7d"; + regulator-min-microvolt = <3072000>; + regulator-max-microvolt = <3072000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l8d: ldo8 { + regulator-name = "vreg_l8d"; + regulator-min-microvolt = <912000>; + regulator-max-microvolt = <912000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l9d: ldo9 { + regulator-name = "vreg_l9d"; + regulator-min-microvolt = <912000>; + regulator-max-microvolt = <912000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l10d: ldo10 { + regulator-name = "vreg_l10d"; + regulator-min-microvolt = <912000>; + regulator-max-microvolt = <912000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; + }; + }; +}; + +&dispcc0 { + status = "okay"; +}; + +&gpu { + status = "okay"; + + zap-shader { + memory-region = <&gpu_mem>; + firmware-name = "qcom/sc8280xp/HUAWEI/gaokun3/qcdxkmsuc8280.mbn"; + }; +}; + +&i2c4 { + clock-frequency = <400000>; + + pinctrl-names = "default"; + pinctrl-0 = <&i2c4_default>; + + status = "okay"; + + touchscreen@4f { + compatible = "hid-over-i2c"; + reg = <0x4f>; + + hid-descr-addr = <0x1>; + interrupts-extended = <&tlmm 175 IRQ_TYPE_LEVEL_LOW>; + + vdd-supply = <&vreg_misc_3p3>; + vddl-supply = <&vreg_s10b>; + + pinctrl-names = "default"; + pinctrl-0 = <&ts0_default>; + + }; + +}; + +&mdss0 { + status = "okay"; +}; + +&mdss0_dp0 { + status = "okay"; +}; + +&mdss0_dp0_out { + data-lanes = <0 1>; + remote-endpoint = <&usb_0_qmpphy_dp_in>; +}; + +&mdss0_dp1 { + status = "okay"; +}; + +&mdss0_dp1_out { + data-lanes = <0 1>; + remote-endpoint = <&usb_1_qmpphy_dp_in>; +}; + +&pcie2a { + perst-gpios = <&tlmm 143 GPIO_ACTIVE_LOW>; + wake-gpios = <&tlmm 145 GPIO_ACTIVE_LOW>; + + vddpe-3v3-supply = <&vreg_nvme>; + + pinctrl-names = "default"; + pinctrl-0 = <&pcie2a_default>; + + status = "okay"; +}; + +&pcie2a_phy { + vdda-phy-supply = <&vreg_l6d>; + vdda-pll-supply = <&vreg_l4d>; + + status = "okay"; +}; + +&pcie4 { + max-link-speed = <2>; + + perst-gpios = <&tlmm 141 GPIO_ACTIVE_LOW>; + wake-gpios = <&tlmm 139 GPIO_ACTIVE_LOW>; + + vddpe-3v3-supply = <&vreg_wlan>; + + pinctrl-names = "default"; + pinctrl-0 = <&pcie4_default>; + + status = "okay"; +}; + +&pcie4_port0 { + wifi@0 { + compatible = "pci17cb,1103"; + reg = <0x10000 0x0 0x0 0x0 0x0>; + + vddrfacmn-supply = <&vreg_pmu_rfa_cmn_0p8>; + vddaon-supply = <&vreg_pmu_aon_0p8>; + vddwlcx-supply = <&vreg_pmu_wlcx_0p8>; + vddwlmx-supply = <&vreg_pmu_wlmx_0p8>; + vddpcie1p8-supply = <&vreg_pmu_pcie_1p8>; + vddpcie0p9-supply = <&vreg_pmu_pcie_0p9>; + vddrfa0p8-supply = <&vreg_pmu_rfa_0p8>; + vddrfa1p2-supply = <&vreg_pmu_rfa_1p2>; + vddrfa1p8-supply = <&vreg_pmu_rfa_1p7>; + + /* /lib/firmware/ath11k/WCN6855/hw2.1/board-2.bin + * there is no calibrate data for huawei, + * but they have the same subsystem-device id + */ + qcom,ath11k-calibration-variant = "LE_X13S"; + }; +}; + +&pcie4_phy { + vdda-phy-supply = <&vreg_l6d>; + vdda-pll-supply = <&vreg_l4d>; + + status = "okay"; +}; + +&pmk8280_adc_tm { + status = "okay"; + + sys-therm@0 { + reg = <0>; + io-channels = <&pmk8280_vadc PM8350_ADC7_AMUX_THM1_100K_PU(1)>; + qcom,hw-settle-time-us = <200>; + qcom,avg-samples = <2>; + qcom,ratiometric; + }; + + sys-therm@1 { + reg = <1>; + io-channels = <&pmk8280_vadc PM8350_ADC7_AMUX_THM2_100K_PU(1)>; + qcom,hw-settle-time-us = <200>; + qcom,avg-samples = <2>; + qcom,ratiometric; + }; + + sys-therm@2 { + reg = <2>; + io-channels = <&pmk8280_vadc PM8350_ADC7_AMUX_THM3_100K_PU(1)>; + qcom,hw-settle-time-us = <200>; + qcom,avg-samples = <2>; + qcom,ratiometric; + }; + + sys-therm@3 { + reg = <3>; + io-channels = <&pmk8280_vadc PM8350_ADC7_AMUX_THM4_100K_PU(1)>; + qcom,hw-settle-time-us = <200>; + qcom,avg-samples = <2>; + qcom,ratiometric; + }; + + sys-therm@4 { + reg = <4>; + io-channels = <&pmk8280_vadc PM8350_ADC7_AMUX_THM1_100K_PU(3)>; + qcom,hw-settle-time-us = <200>; + qcom,avg-samples = <2>; + qcom,ratiometric; + }; + + sys-therm@5 { + reg = <5>; + io-channels = <&pmk8280_vadc PM8350_ADC7_AMUX_THM2_100K_PU(3)>; + qcom,hw-settle-time-us = <200>; + qcom,avg-samples = <2>; + qcom,ratiometric; + }; + + sys-therm@6 { + reg = <6>; + io-channels = <&pmk8280_vadc PM8350_ADC7_AMUX_THM3_100K_PU(3)>; + qcom,hw-settle-time-us = <200>; + qcom,avg-samples = <2>; + qcom,ratiometric; + }; + + sys-therm@7 { + reg = <7>; + io-channels = <&pmk8280_vadc PM8350_ADC7_AMUX_THM4_100K_PU(3)>; + qcom,hw-settle-time-us = <200>; + qcom,avg-samples = <2>; + qcom,ratiometric; + }; +}; + +&pmk8280_pon_pwrkey { + status = "okay"; +}; + +&pmk8280_pon_resin { + status = "okay"; + linux,code = <KEY_VOLUMEDOWN>; +}; + +&pmk8280_rtc { + nvmem-cells = <&rtc_offset>; + nvmem-cell-names = "offset"; + + status = "okay"; +}; + +&pmk8280_sdam_6 { + status = "okay"; + + rtc_offset: rtc-offset@bc { + reg = <0xbc 0x4>; + }; +}; + +&pmk8280_vadc { + channel@144 { + reg = <PM8350_ADC7_AMUX_THM1_100K_PU(1)>; + qcom,hw-settle-time = <200>; + qcom,ratiometric; + label = "sys_therm1"; + }; + + channel@145 { + reg = <PM8350_ADC7_AMUX_THM2_100K_PU(1)>; + qcom,hw-settle-time = <200>; + qcom,ratiometric; + label = "sys_therm2"; + }; + + channel@146 { + reg = <PM8350_ADC7_AMUX_THM3_100K_PU(1)>; + qcom,hw-settle-time = <200>; + qcom,ratiometric; + label = "sys_therm3"; + }; + + channel@147 { + reg = <PM8350_ADC7_AMUX_THM4_100K_PU(1)>; + qcom,hw-settle-time = <200>; + qcom,ratiometric; + label = "sys_therm4"; + }; + + channel@344 { + reg = <PM8350_ADC7_AMUX_THM1_100K_PU(3)>; + qcom,hw-settle-time = <200>; + qcom,ratiometric; + label = "sys_therm5"; + }; + + channel@345 { + reg = <PM8350_ADC7_AMUX_THM2_100K_PU(3)>; + qcom,hw-settle-time = <200>; + qcom,ratiometric; + label = "sys_therm6"; + }; + + channel@346 { + reg = <PM8350_ADC7_AMUX_THM3_100K_PU(3)>; + qcom,hw-settle-time = <200>; + qcom,ratiometric; + label = "sys_therm7"; + }; + + channel@347 { + reg = <PM8350_ADC7_AMUX_THM4_100K_PU(3)>; + qcom,hw-settle-time = <200>; + qcom,ratiometric; + label = "sys_therm8"; + }; +}; + +&qup0 { + status = "okay"; +}; + +&qup1 { + status = "okay"; +}; + +&qup2 { + status = "okay"; +}; + +&remoteproc_adsp { + firmware-name = "qcom/sc8280xp/HUAWEI/gaokun3/qcadsp8280.mbn"; + + status = "okay"; +}; + +&remoteproc_nsp0 { + firmware-name = "qcom/sc8280xp/HUAWEI/gaokun3/qccdsp8280.mbn"; + + status = "okay"; +}; + +&rxmacro { + status = "okay"; +}; + +&sound { + compatible = "qcom,sc8280xp-sndcard"; + model = "SC8280XP-HUAWEI-MATEBOOKEGO"; + audio-routing = + "SpkrLeft IN", "WSA_SPK1 OUT", + "SpkrRight IN", "WSA_SPK2 OUT", + "IN1_HPHL", "HPHL_OUT", + "IN2_HPHR", "HPHR_OUT", + "AMIC2", "MIC BIAS2", + "VA DMIC0", "MIC BIAS1", + "VA DMIC1", "MIC BIAS1", + "VA DMIC2", "MIC BIAS3", + "VA DMIC0", "VA MIC BIAS1", + "VA DMIC1", "VA MIC BIAS1", + "VA DMIC2", "VA MIC BIAS3", + "TX SWR_ADC1", "ADC2_OUTPUT"; + + wcd-playback-dai-link { + link-name = "WCD Playback"; + cpu { + sound-dai = <&q6apmbedai RX_CODEC_DMA_RX_0>; + }; + + codec { + sound-dai = <&wcd938x 0>, <&swr1 0>, <&rxmacro 0>; + }; + + platform { + sound-dai = <&q6apm>; + }; + }; + + wcd-capture-dai-link { + link-name = "WCD Capture"; + cpu { + sound-dai = <&q6apmbedai TX_CODEC_DMA_TX_3>; + }; + + codec { + sound-dai = <&wcd938x 1>, <&swr2 0>, <&txmacro 0>; + }; + + platform { + sound-dai = <&q6apm>; + }; + }; + + wsa-dai-link { + link-name = "WSA Playback"; + cpu { + sound-dai = <&q6apmbedai WSA_CODEC_DMA_RX_0>; + }; + + codec { + sound-dai = <&left_spkr>, <&right_spkr>, <&swr0 0>, <&wsamacro 0>; + }; + + platform { + sound-dai = <&q6apm>; + }; + }; + + va-dai-link { + link-name = "VA Capture"; + cpu { + sound-dai = <&q6apmbedai VA_CODEC_DMA_TX_0>; + }; + + platform { + sound-dai = <&q6apm>; + }; + + codec { + sound-dai = <&vamacro 0>; + }; + }; +}; + +&swr0 { + status = "okay"; + + left_spkr: wsa8830-left@0,1 { + compatible = "sdw10217020200"; + reg = <0 1>; + pinctrl-names = "default"; + pinctrl-0 = <&spkr_1_sd_n_default>; + powerdown-gpios = <&tlmm 178 GPIO_ACTIVE_LOW>; + #thermal-sensor-cells = <0>; + sound-name-prefix = "SpkrLeft"; + #sound-dai-cells = <0>; + vdd-supply = <&vreg_s10b>; + }; + + right_spkr: wsa8830-right@0,2 { + compatible = "sdw10217020200"; + reg = <0 2>; + pinctrl-names = "default"; + pinctrl-0 = <&spkr_2_sd_n_default>; + powerdown-gpios = <&tlmm 179 GPIO_ACTIVE_LOW>; + #thermal-sensor-cells = <0>; + sound-name-prefix = "SpkrRight"; + #sound-dai-cells = <0>; + vdd-supply = <&vreg_s10b>; + }; +}; + +&swr1 { + status = "okay"; + + wcd_rx: wcd9380-rx@0,4 { + compatible = "sdw20217010d00"; + reg = <0 4>; + qcom,rx-port-mapping = <1 2 3 4 5>; + }; +}; + +&swr2 { + status = "okay"; + + wcd_tx: wcd9380-tx@0,3 { + compatible = "sdw20217010d00"; + reg = <0 3>; + qcom,tx-port-mapping = <1 1 2 3>; + }; +}; + +&txmacro { + status = "okay"; +}; + +&uart2 { + pinctrl-0 = <&uart2_default>; + pinctrl-names = "default"; + + status = "okay"; + + bluetooth { + compatible = "qcom,wcn6855-bt"; + + vddrfacmn-supply = <&vreg_pmu_rfa_cmn_0p8>; + vddaon-supply = <&vreg_pmu_aon_0p8>; + vddwlcx-supply = <&vreg_pmu_wlcx_0p8>; + vddwlmx-supply = <&vreg_pmu_wlmx_0p8>; + vddbtcmx-supply = <&vreg_pmu_btcmx_0p8>; + vddrfa0p8-supply = <&vreg_pmu_rfa_0p8>; + vddrfa1p2-supply = <&vreg_pmu_rfa_1p2>; + vddrfa1p8-supply = <&vreg_pmu_rfa_1p7>; + + max-speed = <3200000>; + }; +}; + +&usb_0 { + status = "okay"; +}; + +&usb_0_dwc3 { + dr_mode = "host"; +}; + +&usb_0_hsphy { + vdda-pll-supply = <&vreg_l9d>; + vdda18-supply = <&vreg_l1c>; + vdda33-supply = <&vreg_l7d>; + + status = "okay"; +}; + +&usb_0_qmpphy { + vdda-phy-supply = <&vreg_l9d>; + vdda-pll-supply = <&vreg_l4d>; + + orientation-switch; + + status = "okay"; +}; + +&usb_0_qmpphy_dp_in { + remote-endpoint = <&mdss0_dp0_out>; +}; + +&usb_1 { + status = "okay"; +}; + +&usb_1_dwc3 { + dr_mode = "host"; +}; + +&usb_1_hsphy { + vdda-pll-supply = <&vreg_l4b>; + vdda18-supply = <&vreg_l1c>; + vdda33-supply = <&vreg_l13c>; + + status = "okay"; +}; + +&usb_1_qmpphy { + vdda-phy-supply = <&vreg_l4b>; + vdda-pll-supply = <&vreg_l3b>; + + orientation-switch; + + status = "okay"; +}; + +&usb_1_qmpphy_dp_in { + remote-endpoint = <&mdss0_dp1_out>; +}; + +&usb_2 { + status = "okay"; +}; + +&usb_2_hsphy0 { + vdda-pll-supply = <&vreg_l1b>; + vdda18-supply = <&vreg_l1c>; + vdda33-supply = <&vreg_l7d>; + + status = "okay"; +}; + +&usb_2_hsphy1 { + vdda-pll-supply = <&vreg_l8d>; + vdda18-supply = <&vreg_l1c>; + vdda33-supply = <&vreg_l7d>; + + status = "okay"; +}; + +&usb_2_hsphy2 { + vdda-pll-supply = <&vreg_l10d>; + vdda18-supply = <&vreg_l8c>; + vdda33-supply = <&vreg_l2d>; + + status = "okay"; +}; + +&usb_2_hsphy3 { + vdda-pll-supply = <&vreg_l10d>; + vdda18-supply = <&vreg_l8c>; + vdda33-supply = <&vreg_l2d>; + + status = "okay"; +}; + +&usb_2_qmpphy0 { + vdda-phy-supply = <&vreg_l1b>; + vdda-pll-supply = <&vreg_l4d>; + + status = "okay"; +}; + +&usb_2_qmpphy1 { + vdda-phy-supply = <&vreg_l8d>; + vdda-pll-supply = <&vreg_l4d>; + + status = "okay"; +}; + +&vamacro { + pinctrl-0 = <&dmic01_default>, <&dmic23_default>; + pinctrl-names = "default"; + + vdd-micb-supply = <&vreg_s10b>; + + qcom,dmic-sample-rate = <4800000>; + + status = "okay"; +}; + +&venus { + firmware-name = "qcom/sc8280xp/HUAWEI/gaokun3/qcvss8280.mbn"; + status = "okay"; +}; + +&wsamacro { + status = "okay"; +}; + +&xo_board_clk { + clock-frequency = <38400000>; +}; + +/* PINCTRL */ + +&lpass_tlmm { + status = "okay"; +}; + +&pmc8280_1_gpios { + misc_3p3_reg_en: misc-3p3-reg-en-state { + pins = "gpio1"; + function = "normal"; + }; + + vol_up_n: vol-up-n-state { + pins = "gpio6"; + function = "normal"; + power-source = <1>; + input-enable; + bias-pull-up; + }; +}; + +&pmr735a_gpios { + hastings_reg_en: hastings-reg-en-state { + pins = "gpio1"; + function = "normal"; + }; +}; + +&tlmm { + + gpio-reserved-ranges = <70 2>, <74 6>, <83 4>, <125 2>, <128 2>, <154 4>; + + bt_default: bt-default-state { + hstp-bt-en-pins { + pins = "gpio133"; + function = "gpio"; + drive-strength = <16>; + bias-disable; + }; + + hstp-sw-ctrl-pins { + pins = "gpio132"; + function = "gpio"; + bias-pull-down; + }; + }; + + i2c4_default: i2c4-default-state { + pins = "gpio171", "gpio172"; + function = "qup4"; + drive-strength = <16>; + bias-disable; + }; + + mode_pin_active: mode-pin-state { + pins = "gpio26"; + function = "gpio"; + bias-disable; + }; + + nvme_reg_en: nvme-reg-en-state { + pins = "gpio135"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + pcie2a_default: pcie2a-default-state { + clkreq-n-pins { + pins = "gpio142"; + function = "pcie2a_clkreq"; + drive-strength = <2>; + bias-pull-up; + }; + + perst-n-pins { + pins = "gpio143"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + wake-n-pins { + pins = "gpio145"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; + }; + + pcie4_default: pcie4-default-state { + clkreq-n-pins { + pins = "gpio140"; + function = "pcie4_clkreq"; + drive-strength = <2>; + bias-pull-up; + }; + + perst-n-pins { + pins = "gpio141"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + wake-n-pins { + pins = "gpio139"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; + }; + + spkr_1_sd_n_default: spkr-1-sd-n-default-state { + perst-n-pins { + pins = "gpio178"; + function = "gpio"; + drive-strength = <16>; + bias-disable; + output-high; + }; + }; + + spkr_2_sd_n_default: spkr-2-sd-n-default-state { + perst-n-pins { + pins = "gpio179"; + function = "gpio"; + drive-strength = <16>; + bias-disable; + output-high; + }; + }; + + ts0_default: ts0-default-state { + int-n-pins { + pins = "gpio175"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + reset-n-pins { + pins = "gpio99"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + output-high; + }; + }; + + uart2_default: uart2-default-state { + cts-pins { + pins = "gpio121"; + function = "qup2"; + bias-bus-hold; + }; + + rts-pins { + pins = "gpio122"; + function = "qup2"; + drive-strength = <2>; + bias-disable; + }; + + rx-pins { + pins = "gpio124"; + function = "qup2"; + bias-pull-up; + }; + + tx-pins { + pins = "gpio123"; + function = "qup2"; + drive-strength = <2>; + bias-disable; + }; + }; + + wcd_default: wcd-default-state { + reset-pins { + pins = "gpio106"; + function = "gpio"; + bias-disable; + }; + }; + + wlan_en: wlan-en-state { + pins = "gpio134"; + function = "gpio"; + drive-strength = <8>; + bias-pull-down; + }; + +}; -- 2.47.1
