Re: [PATCH 07/15] ARM: zynq: Add ethernet phy reset information to DT(zc702)

[Michal Simek <michal.simek@xxxxxxx>]

Hi Andrew,

On 12/11/24 14:45, Andrew Lunn wrote:
> On Wed, Dec 11, 2024 at 01:41:26PM +0100, Michal Simek wrote:
> > Added phy reset gpio information for gem0.
> >
> > Signed-off-by: Michal Simek <michal.simek@xxxxxxx>
> > ---
> >
> >   arch/arm/boot/dts/xilinx/zynq-zc702.dts | 2 ++
> >   1 file changed, 2 insertions(+)
> >
> > diff --git a/arch/arm/boot/dts/xilinx/zynq-zc702.dts b/arch/arm/boot/dts/xilinx/zynq-zc702.dts
> > index 424e78f6c148..975385f4ac01 100644
> > --- a/arch/arm/boot/dts/xilinx/zynq-zc702.dts
> > +++ b/arch/arm/boot/dts/xilinx/zynq-zc702.dts
> > @@ -79,6 +79,8 @@ &gem0 {
> >   	phy-handle = <&ethernet_phy>;
> >   	pinctrl-names = "default";
> >   	pinctrl-0 = <&pinctrl_gem0_default>;
> > +	phy-reset-gpio = <&gpio0 11 0>;
> > +	phy-reset-active-low;
>
> Hi Michal
>
> Could you point me at code which actually implements these two
> properties.

I have tracked it down and it was only used from 2016 to 2018 in Xilinx 
downstream Linux repository. After that it was removed.

If you are interested
https://gitenterprise.xilinx.com/Linux/linux-xlnx/commit/6f43a25c416e532530eaed897acff6f5249907e4

> What is more normal is a reset-gpios property in the PHY node, or a
> reset-gpios in the MDIO node.

Thanks for review. This patch should be dropped from this series.

Thanks,
Michal