Add pwm-fan node to the OdroidXU3 board.
Tested on OdroidXU3 board.
Changes since v1 : None
Changes since v2 : None
Tested-by: Markus Reichl <m.reichl@xxxxxxxxxxxxx>
Acked-by: Lukasz Majewski <l.majewski@xxxxxxxxxxx>
Signed-off-by: Anand Moon <linux.amoon@xxxxxxxxx>
---
arch/arm/boot/dts/exynos5422-odroidxu3.dts | 16 ++++++++++++++++
1 file changed, 16 insertions(+)
diff --git a/arch/arm/boot/dts/exynos5422-odroidxu3.dts b/arch/arm/boot/dts/exynos5422-odroidxu3.dts
index a519c86..04d982b 100644
--- a/arch/arm/boot/dts/exynos5422-odroidxu3.dts
+++ b/arch/arm/boot/dts/exynos5422-odroidxu3.dts
@@ -278,6 +278,15 @@
rtc@101E0000 {
status = "okay";
};
+
+ fan0: pwm-fan {
+ compatible = "pwm-fan";
+ pwms = <&pwm 0 20972 0>;
+ cooling-min-state = <0>;
+ cooling-max-state = <3>;
+ #cooling-cells = <2>;
+ cooling-levels = <0 130 170 230>;
+ };
};
&hdmi {
@@ -369,3 +378,10 @@
shunt-resistor = <10000>;
};
};
+
+&pwm {
+ pinctrl-0 = <&pwm0_out>;
+ pinctrl-names = "default";
+ samsung,pwm-outputs = <0>;
+ status = "okay";
+};
--
1.9.1
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
