From: Krishna Kurapati <krishna.kurapati@xxxxxxxxxxxxxxxx>
Enable secondary USB controller on QCS615 Ride platform. The secondary
USB controller is made "host", as it is a Type-A port.
Signed-off-by: Krishna Kurapati <krishna.kurapati@xxxxxxxxxxxxxxxx>
Co-developed-by: Song Xue <quic_songxue@xxxxxxxxxxx>
Signed-off-by: Song Xue <quic_songxue@xxxxxxxxxxx>
---
arch/arm64/boot/dts/qcom/qcs615-ride.dts | 28 ++++++++++++++++++++++++++++
1 file changed, 28 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/qcs615-ride.dts b/arch/arm64/boot/dts/qcom/qcs615-ride.dts
index f41319ff47b983d771da52775fa78b4385c4e532..26ce0496d13ccbfea392c6d50d9edcab85fbc653 100644
--- a/arch/arm64/boot/dts/qcom/qcs615-ride.dts
+++ b/arch/arm64/boot/dts/qcom/qcs615-ride.dts
@@ -203,6 +203,15 @@ &gcc {
<&sleep_clk>;
};
+&pm8150_gpios {
+ usb2_en_state: usb2-en-state {
+ pins = "gpio10";
+ function = "normal";
+ output-high;
+ power-source = <0>;
+ };
+};
+
&pon_pwrkey {
status = "okay";
};
@@ -248,6 +257,25 @@ &usb_1_dwc3 {
dr_mode = "peripheral";
};
+&usb_hsphy_2 {
+ vdd-supply = <&vreg_l5a>;
+ vdda-pll-supply = <&vreg_l12a>;
+ vdda-phy-dpdm-supply = <&vreg_l13a>;
+
+ status = "okay";
+};
+
+&usb_2 {
+ pinctrl-0 = <&usb2_en_state>;
+ pinctrl-names = "default";
+
+ status = "okay";
+};
+
+&usb_2_dwc3 {
+ dr_mode = "host";
+};
+
&watchdog {
clocks = <&sleep_clk>;
};
--
2.25.1
