The RK3588 EVB1 has an onboard AP6275P WLAN/BT module. This adds
support for the WLAN side, which is connected to the second
PCIe bus. The Bluetooth side is connected to UART and handled
separately.
Signed-off-by: Sebastian Reichel <sebastian.reichel@xxxxxxxxxxxxx>
---
Changes since PATCHv1:
* rebase to latest for-next branch from Heiko
* add regulator- prefix to regulator nodes
* sort properties alphabetically in regulator nodes
* sort regulator nodes alphabetically
---
.../boot/dts/rockchip/rk3588-evb1-v10.dts | 82 +++++++++++++++++++
1 file changed, 82 insertions(+)
diff --git a/arch/arm64/boot/dts/rockchip/rk3588-evb1-v10.dts b/arch/arm64/boot/dts/rockchip/rk3588-evb1-v10.dts
index d6e464cdc536..ba49f0bbaac6 100644
--- a/arch/arm64/boot/dts/rockchip/rk3588-evb1-v10.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3588-evb1-v10.dts
@@ -206,6 +206,28 @@ vcc3v3_pcie30: regulator-vcc3v3-pcie30 {
pinctrl-0 = <&vcc3v3_pcie30_en>;
};
+ vcc3v3_pciewl_vbat: regulator-vcc3v3-pciewl-vbat {
+ compatible = "regulator-fixed";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "wlan-vbat";
+ vin-supply = <&vcc_3v3_s0>;
+ };
+
+ vcc3v3_wlan: regulator-vcc3v3-wlan {
+ compatible = "regulator-fixed";
+ enable-active-high;
+ gpios = <&gpio3 RK_PB1 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&wifi_pwren>;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "wlan-en";
+ vin-supply = <&vcc3v3_pciewl_vbat>;
+ };
+
vcc5v0_host: regulator-vcc5v0-host {
compatible = "regulator-fixed";
regulator-name = "vcc5v0_host";
@@ -249,12 +271,26 @@ vcc5v0_usb: regulator-vcc5v0-usb {
regulator-max-microvolt = <5000000>;
vin-supply = <&vcc5v0_usbdcin>;
};
+
+ vccio_wl: regulator-vccio-wl {
+ compatible = "regulator-fixed";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-name = "wlan-vddio";
+ vin-supply = <&vcc_1v8_s0>;
+ };
};
&combphy0_ps {
status = "okay";
};
+&combphy1_ps {
+ status = "okay";
+};
+
&combphy2_psu {
status = "okay";
};
@@ -440,6 +476,30 @@ rgmii_phy: ethernet-phy@1 {
};
};
+&pcie2x1l0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pcie2_0_rst>, <&pcie2_0_wake>, <&pcie2_0_clkreq>, <&wifi_host_wake_irq>;
+ reset-gpios = <&gpio4 RK_PA5 GPIO_ACTIVE_HIGH>;
+ vpcie3v3-supply = <&vcc3v3_wlan>;
+ status = "okay";
+
+ pcie@0,0 {
+ reg = <0x200000 0 0 0 0>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+ ranges;
+ device_type = "pci";
+ bus-range = <0x20 0x2f>;
+
+ wifi: wifi@0,0 {
+ compatible = "pci14e4,449d";
+ reg = <0x210000 0 0 0 0>;
+ clocks = <&hym8563>;
+ clock-names = "lpo";
+ };
+ };
+};
+
&pcie2x1l1 {
reset-gpios = <&gpio4 RK_PA2 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
@@ -494,6 +554,18 @@ hym8563_int: hym8563-int {
};
pcie2 {
+ pcie2_0_rst: pcie2-0-rst {
+ rockchip,pins = <4 RK_PA5 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+
+ pcie2_0_wake: pcie2-0-wake {
+ rockchip,pins = <4 RK_PA4 4 &pcfg_pull_none>;
+ };
+
+ pcie2_0_clkreq: pcie2-0-clkreq {
+ rockchip,pins = <4 RK_PA3 4 &pcfg_pull_none>;
+ };
+
pcie2_1_rst: pcie2-1-rst {
rockchip,pins = <4 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>;
};
@@ -524,6 +596,16 @@ usbc0_int: usbc0-int {
rockchip,pins = <3 RK_PB4 RK_FUNC_GPIO &pcfg_pull_up>;
};
};
+
+ wlan {
+ wifi_host_wake_irq: wifi-host-wake-irq {
+ rockchip,pins = <3 RK_PA7 RK_FUNC_GPIO &pcfg_pull_down>;
+ };
+
+ wifi_pwren: wifi-pwren {
+ rockchip,pins = <3 RK_PB1 RK_FUNC_GPIO &pcfg_pull_up>;
+ };
+ };
};
&pwm2 {
--
2.45.2
