Andrew Lunn писал 12.04.2015 00:40:
On Sat, Apr 11, 2015 at 11:29:20PM +0300, Andrew Andrianov wrote:
Signed-off-by: Andrew Andrianov <andrew@xxxxxxxxxx>
---
arch/arm/boot/dts/Makefile | 1 +
arch/arm/boot/dts/armada-370-dlink-dns327l.dts | 309
++++++++++++++++++++++++
2 files changed, 310 insertions(+)
create mode 100644 arch/arm/boot/dts/armada-370-dlink-dns327l.dts
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index a1c776b..8535e4e 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -612,6 +612,7 @@ dtb-$(CONFIG_ARCH_ZYNQ) += \
zynq-zybo.dtb
dtb-$(CONFIG_MACH_ARMADA_370) += \
armada-370-db.dtb \
+ armada-370-dlink-dns327l.dtb \
armada-370-mirabox.dtb \
armada-370-netgear-rn102.dtb \
armada-370-netgear-rn104.dtb \
diff --git a/arch/arm/boot/dts/armada-370-dlink-dns327l.dts
b/arch/arm/boot/dts/armada-370-dlink-dns327l.dts
new file mode 100644
index 0000000..12bc072
--- /dev/null
+++ b/arch/arm/boot/dts/armada-370-dlink-dns327l.dts
@@ -0,0 +1,309 @@
+/*
+ * Device Tree file for DLINK DNS-327L
+ *
+ * Copyright (C) 2014, Andrew Andrianov <andrew@xxxxxxxxxx>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
Hi Andrew
There has been a move to license all the 370 and XP DTS files under
dual GPL and X11. Are you willing to add X11?
No problem, will fix.
+
+/* Remaining mysteries:
+ *
+ * There's still something unknown on i2c address 0x13
+ * CONFIG_ARM_MVEBU_V7_CPUIDLE=y causes hard freezes every 1-8 hours
+ *
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/gpio/gpio.h>
+#include "armada-370.dtsi"
+
+/ {
+ model = "DLINK DNS-327L";
+ compatible = "dlink,dns327l",
+ "marvell,armada370",
+ "marvell,armada-370-xp";
+
+ chosen {
+ bootargs = "console=ttyS0,115200 earlyprintk";
It would be nice to have
stdout-path = &uart0;
here. That will help with boot loaders, using this DT file, and it a
step towards removing the console=ttyS0,115200.
+ };
+
+ memory {
+ device_type = "memory";
+ reg = <0x00000000 0x20000000>; /* 512 MiB */
+ };
+
+ soc {
+ ranges = <MBUS_ID(0xf0, 0x01) 0 0xd0000000 0x100000
+ MBUS_ID(0x01, 0xe0) 0 0xfff00000 0x100000>;
+
+ pcie-controller {
+ status = "okay";
+
+ /* Connected to Marvell SATA controller */
+ pcie@1,0 {
+ /* Port 0, Lane 0 */
+ status = "okay";
+ };
+
+ /* Connected to NEC USB 3.0 controller */
+ pcie@2,0 {
+ /* Port 1, Lane 0 */
+ status = "okay";
+ };
+ };
+
+ internal-regs {
+ serial@12000 {
+ status = "okay";
+ };
+
+ serial@12100 {
+ status = "okay";
+ };
Are both serial ports usable?
Could you document the pinout for the console?
Thanks
Andrew
The serial console pinout is :
[RXD|(gap)|3.3v|GND|TXD]
I've been documenting the hardware extensively in my blog here:
http://ncrmnt.org/wp/2015/02/15/debian-dlink-dns-327l-the-guide/
Pictures of the PCB are all there.
The second UART is used to interface with weltrend mcu only.
I'll resubmit the patches with fixes sometime tomorrow evening (GMT+4).
Hopefully I'll also find out is hardware freezes with cpuidle enabled
are
still there on 4.0-rc7.
--
Regards,
Andrew
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
