On Mon, 9 Dec 2024 at 17:30, Johan Hovold <johan@xxxxxxxxxx> wrote: > > On Mon, Dec 09, 2024 at 03:23:05PM +0200, Dmitry Baryshkov wrote: > > On Mon, Dec 09, 2024 at 12:19:03PM +0100, Johan Hovold wrote: > > > A recent change enabling OTG mode on the Lenovo ThinkPad T14s USB-C > > > ports can break SuperSpeed device hotplugging. > > > > > > Abel noticed that the corresponding commit for the CRD also triggers a > > > hard reset during resume from suspend. > > > > > > With retimer (and orientation detection) support not even merged yet, > > > let's revert at least until we have stable host mode in mainline. > > > > > > Note that Stephan and Dmitry have already identified other problems with > > > the offending commits here: > > > > > > https://lore.kernel.org/all/ZxZO6Prrm2ITUZMQ@xxxxxxxxxx/ > > > https://lore.kernel.org/all/hw2pdof4ajadjsjrb44f2q4cz4yh5qcqz5d3l7gjt2koycqs3k@xx5xvd26uyef > > > > Changes in v2 > > > - revert also the corresponding patch for the CRD which breaks suspend > > > > As you are reverting two commits, please revert the third one too, it > > breaks pmic-glink. > > Can you be more specific? > > I was gonna say that pmic_glink works since hotplug and orientation > detection still works, but I tested now with DP altmode and that is > indeed broken unless I revert the third commit (f042bc234c2e ("arm64: > dts: qcom: x1e80100: enable OTG on USB-C controllers")). > > Was that what you had in mind? Can you explain why that breaks? See https://linux-regtracking.leemhuis.info/regzbot/regression/lore/hw2pdof4ajadjsjrb44f2q4cz4yh5qcqz5d3l7gjt2koycqs3k@xx5xvd26uyef/ For some reason commit f042bc234c2e ("arm64: dts: qcom: x1e80100: enable OTG on USB-C controllers") seems to break UCSI on X1E80100 CRD: [ 34.479352] ucsi_glink.pmic_glink_ucsi pmic_glink.ucsi.0: PPM init failed, stop trying > > I'll respin with a v3, but please answer the above first. > > > > Johan Hovold (2): > > > Revert "arm64: dts: qcom: x1e78100-t14s: enable otg on usb-c ports" > > > Revert "arm64: dts: qcom: x1e80100-crd: enable otg on usb ports" > > Johan -- With best wishes Dmitry