Re: [PATCH v7 4/7] clk: Add clock driver for mb86s7x

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




Quoting Vincent Yang (2015-03-04 03:04:03)
> From: Jassi Brar <jaswinder.singh@xxxxxxxxxx>
> 
>  The CRG11 clock controller is managed by remote f/w.
> This driver simply maps Linux CLK ops onto mailbox api.
> 
> Signed-off-by: Andy Green <andy.green@xxxxxxxxxx>
> Signed-off-by: Vincent Yang <vincent.yang@xxxxxxxxxxxxx>
> Signed-off-by: Tetsuya Nuriya <nuriya.tetsuya@xxxxxxxxxxxxx>

Patch looks OK to me. We might to replace that __clk_lookup in crg11_get
with clk_get or something else like it someday if I ever get around to
removing __clk_lookup.

Applied.

Regards,
Mike

> ---
>  .../bindings/clock/fujitsu,mb86s70-crg11.txt       |  26 ++
>  drivers/clk/Makefile                               |   1 +
>  drivers/clk/clk-mb86s7x.c                          | 386 +++++++++++++++++++++
>  3 files changed, 413 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/clock/fujitsu,mb86s70-crg11.txt
>  create mode 100644 drivers/clk/clk-mb86s7x.c
> 
> diff --git a/Documentation/devicetree/bindings/clock/fujitsu,mb86s70-crg11.txt b/Documentation/devicetree/bindings/clock/fujitsu,mb86s70-crg11.txt
> new file mode 100644
> index 0000000..3323962
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/clock/fujitsu,mb86s70-crg11.txt
> @@ -0,0 +1,26 @@
> +Fujitsu CRG11 clock driver bindings
> +-----------------------------------
> +
> +Required properties :
> +- compatible : Shall contain "fujitsu,mb86s70-crg11"
> +- #clock-cells : Shall be 3 {cntrlr domain port}
> +
> +The consumer specifies the desired clock pointing to its phandle.
> +
> +Example:
> +
> +       clock: crg11 {
> +               compatible = "fujitsu,mb86s70-crg11";
> +               #clock-cells = <3>;
> +       };
> +
> +       mhu: mhu0@2b1f0000 {
> +               #mbox-cells = <1>;
> +               compatible = "arm,mhu";
> +               reg = <0 0x2B1F0000 0x1000>;
> +               interrupts = <0 36 4>, /* LP Non-Sec */
> +                            <0 35 4>, /* HP Non-Sec */
> +                            <0 37 4>; /* Secure */
> +               clocks = <&clock 0 2 1>; /* Cntrlr:0 Domain:2 Port:1 */
> +               clock-names = "clk";
> +       };
> diff --git a/drivers/clk/Makefile b/drivers/clk/Makefile
> index d478ceb..1d35f3b 100644
> --- a/drivers/clk/Makefile
> +++ b/drivers/clk/Makefile
> @@ -28,6 +28,7 @@ obj-$(CONFIG_MACH_LOONGSON1)          += clk-ls1x.o
>  obj-$(CONFIG_COMMON_CLK_MAX_GEN)       += clk-max-gen.o
>  obj-$(CONFIG_COMMON_CLK_MAX77686)      += clk-max77686.o
>  obj-$(CONFIG_COMMON_CLK_MAX77802)      += clk-max77802.o
> +obj-$(CONFIG_ARCH_MB86S7X)             += clk-mb86s7x.o
>  obj-$(CONFIG_ARCH_MOXART)              += clk-moxart.o
>  obj-$(CONFIG_ARCH_NOMADIK)             += clk-nomadik.o
>  obj-$(CONFIG_ARCH_NSPIRE)              += clk-nspire.o
> diff --git a/drivers/clk/clk-mb86s7x.c b/drivers/clk/clk-mb86s7x.c
> new file mode 100644
> index 0000000..f39c25a
> --- /dev/null
> +++ b/drivers/clk/clk-mb86s7x.c
> @@ -0,0 +1,386 @@
> +/*
> + * Copyright (C) 2013-2015 FUJITSU SEMICONDUCTOR LIMITED
> + * Copyright (C) 2015 Linaro Ltd.
> + *
> + * This program is free software: you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License as published by
> + * the Free Software Foundation, version 2 of the License.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
> + * GNU General Public License for more details.
> + */
> +
> +#include <linux/clkdev.h>
> +#include <linux/err.h>
> +#include <linux/io.h>
> +#include <linux/of.h>
> +#include <linux/cpu.h>
> +#include <linux/clk-provider.h>
> +#include <linux/spinlock.h>
> +#include <linux/module.h>
> +#include <linux/topology.h>
> +#include <linux/mailbox_client.h>
> +#include <linux/platform_device.h>
> +
> +#include <soc/mb86s7x/scb_mhu.h>
> +
> +#define to_crg_clk(p) container_of(p, struct crg_clk, hw)
> +#define to_clc_clk(p) container_of(p, struct cl_clk, hw)
> +
> +struct mb86s7x_peri_clk {
> +       u32 payload_size;
> +       u32 cntrlr;
> +       u32 domain;
> +       u32 port;
> +       u32 en;
> +       u64 frequency;
> +} __packed __aligned(4);
> +
> +struct hack_rate {
> +       unsigned clk_id;
> +       unsigned long rate;
> +       int gated;
> +};
> +
> +struct crg_clk {
> +       struct clk_hw hw;
> +       u8 cntrlr, domain, port;
> +};
> +
> +static int crg_gate_control(struct clk_hw *hw, int en)
> +{
> +       struct crg_clk *crgclk = to_crg_clk(hw);
> +       struct mb86s7x_peri_clk cmd;
> +       int ret;
> +
> +       cmd.payload_size = sizeof(cmd);
> +       cmd.cntrlr = crgclk->cntrlr;
> +       cmd.domain = crgclk->domain;
> +       cmd.port = crgclk->port;
> +       cmd.en = en;
> +
> +       /* Port is UngatedCLK */
> +       if (cmd.port == 8)
> +               return en ? 0 : -EINVAL;
> +
> +       pr_debug("%s:%d CMD Cntrlr-%u Dom-%u Port-%u En-%u}\n",
> +                __func__, __LINE__, cmd.cntrlr,
> +                cmd.domain, cmd.port, cmd.en);
> +
> +       ret = mb86s7x_send_packet(CMD_PERI_CLOCK_GATE_SET_REQ,
> +                                 &cmd, sizeof(cmd));
> +       if (ret < 0) {
> +               pr_err("%s:%d failed!\n", __func__, __LINE__);
> +               return ret;
> +       }
> +
> +       pr_debug("%s:%d REP Cntrlr-%u Dom-%u Port-%u En-%u}\n",
> +                __func__, __LINE__, cmd.cntrlr,
> +                cmd.domain, cmd.port, cmd.en);
> +
> +       /* If the request was rejected */
> +       if (cmd.en != en)
> +               ret = -EINVAL;
> +       else
> +               ret = 0;
> +
> +       return ret;
> +}
> +
> +static int crg_port_prepare(struct clk_hw *hw)
> +{
> +       return crg_gate_control(hw, 1);
> +}
> +
> +static void crg_port_unprepare(struct clk_hw *hw)
> +{
> +       crg_gate_control(hw, 0);
> +}
> +
> +static int
> +crg_rate_control(struct clk_hw *hw, int set, unsigned long *rate)
> +{
> +       struct crg_clk *crgclk = to_crg_clk(hw);
> +       struct mb86s7x_peri_clk cmd;
> +       int code, ret;
> +
> +       cmd.payload_size = sizeof(cmd);
> +       cmd.cntrlr = crgclk->cntrlr;
> +       cmd.domain = crgclk->domain;
> +       cmd.port = crgclk->port;
> +       cmd.frequency = *rate;
> +
> +       if (set) {
> +               code = CMD_PERI_CLOCK_RATE_SET_REQ;
> +               pr_debug("%s:%d CMD Cntrlr-%u Dom-%u Port-%u Rate-SET %lluHz}\n",
> +                        __func__, __LINE__, cmd.cntrlr,
> +                        cmd.domain, cmd.port, cmd.frequency);
> +       } else {
> +               code = CMD_PERI_CLOCK_RATE_GET_REQ;
> +               pr_debug("%s:%d CMD Cntrlr-%u Dom-%u Port-%u Rate-GET}\n",
> +                        __func__, __LINE__, cmd.cntrlr,
> +                        cmd.domain, cmd.port);
> +       }
> +
> +       ret = mb86s7x_send_packet(code, &cmd, sizeof(cmd));
> +       if (ret < 0) {
> +               pr_err("%s:%d failed!\n", __func__, __LINE__);
> +               return ret;
> +       }
> +
> +       if (set)
> +               pr_debug("%s:%d REP Cntrlr-%u Dom-%u Port-%u Rate-SET %lluHz}\n",
> +                        __func__, __LINE__, cmd.cntrlr,
> +                        cmd.domain, cmd.port, cmd.frequency);
> +       else
> +               pr_debug("%s:%d REP Cntrlr-%u Dom-%u Port-%u Rate-GOT %lluHz}\n",
> +                        __func__, __LINE__, cmd.cntrlr,
> +                        cmd.domain, cmd.port, cmd.frequency);
> +
> +       *rate = cmd.frequency;
> +       return 0;
> +}
> +
> +static unsigned long
> +crg_port_recalc_rate(struct clk_hw *hw,        unsigned long parent_rate)
> +{
> +       unsigned long rate;
> +
> +       crg_rate_control(hw, 0, &rate);
> +
> +       return rate;
> +}
> +
> +static long
> +crg_port_round_rate(struct clk_hw *hw,
> +                   unsigned long rate, unsigned long *pr)
> +{
> +       return rate;
> +}
> +
> +static int
> +crg_port_set_rate(struct clk_hw *hw,
> +                 unsigned long rate, unsigned long parent_rate)
> +{
> +       return crg_rate_control(hw, 1, &rate);
> +}
> +
> +const struct clk_ops crg_port_ops = {
> +       .prepare = crg_port_prepare,
> +       .unprepare = crg_port_unprepare,
> +       .recalc_rate = crg_port_recalc_rate,
> +       .round_rate = crg_port_round_rate,
> +       .set_rate = crg_port_set_rate,
> +};
> +
> +struct mb86s70_crg11 {
> +       struct mutex lock; /* protects CLK populating and searching */
> +};
> +
> +static struct clk *crg11_get(struct of_phandle_args *clkspec, void *data)
> +{
> +       struct mb86s70_crg11 *crg11 = data;
> +       struct clk_init_data init;
> +       u32 cntrlr, domain, port;
> +       struct crg_clk *crgclk;
> +       struct clk *clk;
> +       char clkp[20];
> +
> +       if (clkspec->args_count != 3)
> +               return ERR_PTR(-EINVAL);
> +
> +       cntrlr = clkspec->args[0];
> +       domain = clkspec->args[1];
> +       port = clkspec->args[2];
> +
> +       if (port > 7)
> +               snprintf(clkp, 20, "UngatedCLK%d_%X", cntrlr, domain);
> +       else
> +               snprintf(clkp, 20, "CLK%d_%X_%d", cntrlr, domain, port);
> +
> +       mutex_lock(&crg11->lock);
> +
> +       clk = __clk_lookup(clkp);
> +       if (clk) {
> +               mutex_unlock(&crg11->lock);
> +               return clk;
> +       }
> +
> +       crgclk = kzalloc(sizeof(*crgclk), GFP_KERNEL);
> +       if (!crgclk) {
> +               mutex_unlock(&crg11->lock);
> +               return ERR_PTR(-ENOMEM);
> +       }
> +
> +       init.name = clkp;
> +       init.num_parents = 0;
> +       init.ops = &crg_port_ops;
> +       init.flags = CLK_IS_ROOT;
> +       crgclk->hw.init = &init;
> +       crgclk->cntrlr = cntrlr;
> +       crgclk->domain = domain;
> +       crgclk->port = port;
> +       clk = clk_register(NULL, &crgclk->hw);
> +       if (IS_ERR(clk))
> +               pr_err("%s:%d Error!\n", __func__, __LINE__);
> +       else
> +               pr_debug("Registered %s\n", clkp);
> +
> +       clk_register_clkdev(clk, clkp, NULL);
> +       mutex_unlock(&crg11->lock);
> +       return clk;
> +}
> +
> +static void __init crg_port_init(struct device_node *node)
> +{
> +       struct mb86s70_crg11 *crg11;
> +
> +       crg11 = kzalloc(sizeof(*crg11), GFP_KERNEL);
> +       if (!crg11)
> +               return;
> +
> +       mutex_init(&crg11->lock);
> +
> +       of_clk_add_provider(node, crg11_get, crg11);
> +}
> +CLK_OF_DECLARE(crg11_gate, "fujitsu,mb86s70-crg11", crg_port_init);
> +
> +struct cl_clk {
> +       struct clk_hw hw;
> +       int cluster;
> +};
> +
> +struct mb86s7x_cpu_freq {
> +       u32 payload_size;
> +       u32 cluster_class;
> +       u32 cluster_id;
> +       u32 cpu_id;
> +       u64 frequency;
> +};
> +
> +static void mhu_cluster_rate(struct clk_hw *hw, unsigned long *rate, int get)
> +{
> +       struct cl_clk *clc = to_clc_clk(hw);
> +       struct mb86s7x_cpu_freq cmd;
> +       int code, ret;
> +
> +       cmd.payload_size = sizeof(cmd);
> +       cmd.cluster_class = 0;
> +       cmd.cluster_id = clc->cluster;
> +       cmd.cpu_id = 0;
> +       cmd.frequency = *rate;
> +
> +       if (get)
> +               code = CMD_CPU_CLOCK_RATE_GET_REQ;
> +       else
> +               code = CMD_CPU_CLOCK_RATE_SET_REQ;
> +
> +       pr_debug("%s:%d CMD Cl_Class-%u CL_ID-%u CPU_ID-%u Freq-%llu}\n",
> +                __func__, __LINE__, cmd.cluster_class,
> +                cmd.cluster_id, cmd.cpu_id, cmd.frequency);
> +
> +       ret = mb86s7x_send_packet(code, &cmd, sizeof(cmd));
> +       if (ret < 0) {
> +               pr_err("%s:%d failed!\n", __func__, __LINE__);
> +               return;
> +       }
> +
> +       pr_debug("%s:%d REP Cl_Class-%u CL_ID-%u CPU_ID-%u Freq-%llu}\n",
> +                __func__, __LINE__, cmd.cluster_class,
> +                cmd.cluster_id, cmd.cpu_id, cmd.frequency);
> +
> +       *rate = cmd.frequency;
> +}
> +
> +static unsigned long
> +clc_recalc_rate(struct clk_hw *hw, unsigned long unused)
> +{
> +       unsigned long rate;
> +
> +       mhu_cluster_rate(hw, &rate, 1);
> +       return rate;
> +}
> +
> +static long
> +clc_round_rate(struct clk_hw *hw, unsigned long rate,
> +              unsigned long *unused)
> +{
> +       return rate;
> +}
> +
> +static int
> +clc_set_rate(struct clk_hw *hw, unsigned long rate,
> +            unsigned long unused)
> +{
> +       unsigned long res = rate;
> +
> +       mhu_cluster_rate(hw, &res, 0);
> +
> +       return (res == rate) ? 0 : -EINVAL;
> +}
> +
> +static struct clk_ops clk_clc_ops = {
> +       .recalc_rate = clc_recalc_rate,
> +       .round_rate = clc_round_rate,
> +       .set_rate = clc_set_rate,
> +};
> +
> +struct clk *mb86s7x_clclk_register(struct device *cpu_dev)
> +{
> +       struct clk_init_data init;
> +       struct cl_clk *clc;
> +
> +       clc = kzalloc(sizeof(*clc), GFP_KERNEL);
> +       if (!clc)
> +               return ERR_PTR(-ENOMEM);
> +
> +       clc->hw.init = &init;
> +       clc->cluster = topology_physical_package_id(cpu_dev->id);
> +
> +       init.name = dev_name(cpu_dev);
> +       init.ops = &clk_clc_ops;
> +       init.flags = CLK_IS_ROOT | CLK_GET_RATE_NOCACHE;
> +       init.num_parents = 0;
> +
> +       return devm_clk_register(cpu_dev, &clc->hw);
> +}
> +
> +static int mb86s7x_clclk_of_init(void)
> +{
> +       int cpu, ret = -ENODEV;
> +       struct device_node *np;
> +       struct clk *clk;
> +
> +       np = of_find_compatible_node(NULL, NULL, "fujitsu,mb86s70-scb-1.0");
> +       if (!np || !of_device_is_available(np))
> +               goto exit;
> +
> +       for_each_possible_cpu(cpu) {
> +               struct device *cpu_dev = get_cpu_device(cpu);
> +
> +               if (!cpu_dev) {
> +                       pr_err("failed to get cpu%d device\n", cpu);
> +                       continue;
> +               }
> +
> +               clk = mb86s7x_clclk_register(cpu_dev);
> +               if (IS_ERR(clk)) {
> +                       pr_err("failed to register cpu%d clock\n", cpu);
> +                       continue;
> +               }
> +               if (clk_register_clkdev(clk, NULL, dev_name(cpu_dev))) {
> +                       pr_err("failed to register cpu%d clock lookup\n", cpu);
> +                       continue;
> +               }
> +               pr_debug("registered clk for %s\n", dev_name(cpu_dev));
> +       }
> +       ret = 0;
> +
> +       platform_device_register_simple("arm-bL-cpufreq-dt", -1, NULL, 0);
> +exit:
> +       of_node_put(np);
> +       return ret;
> +}
> +module_init(mb86s7x_clclk_of_init);
> -- 
> 1.9.0
> 
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]
  Powered by Linux