use consistent name with other regulators. no functional change is
intended.
Fixes: 3ddf5cdb77e6 ("arm64: dts: rockchip: add Radxa ROCK 5C")
Signed-off-by: FUKAUMI Naoki <naoki@xxxxxxxxx>
---
Changes in v4:
- reword commit message
Changes in v3:
- none
Changes in v2:
- new
---
arch/arm64/boot/dts/rockchip/rk3588s-rock-5c.dts | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/arch/arm64/boot/dts/rockchip/rk3588s-rock-5c.dts b/arch/arm64/boot/dts/rockchip/rk3588s-rock-5c.dts
index 85589d1a6d3b..61d75ab503b2 100644
--- a/arch/arm64/boot/dts/rockchip/rk3588s-rock-5c.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3588s-rock-5c.dts
@@ -76,13 +76,13 @@ pwm-fan {
pwms = <&pwm3 0 60000 0>;
};
- pcie2x1l2_3v3: regulator-pcie2x1l2-3v3 {
+ vcc3v3_pcie2x1l2: regulator-vcc3v3_pcie2x1l2 {
compatible = "regulator-fixed";
enable-active-high;
gpio = <&gpio0 RK_PC5 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&pow_en>;
- regulator-name = "pcie2x1l2_3v3";
+ regulator-name = "vcc3v3_pcie2x1l2";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
vin-supply = <&vcc_sysin>;
@@ -421,7 +421,7 @@ &pcie2x1l2 {
pinctrl-names = "default";
pinctrl-0 = <&pcie20x1_2_perstn_m0>;
reset-gpios = <&gpio3 RK_PD1 GPIO_ACTIVE_HIGH>;
- vpcie3v3-supply = <&pcie2x1l2_3v3>;
+ vpcie3v3-supply = <&vcc3v3_pcie2x1l2>;
status = "okay";
};
--
2.43.0
