Thanks all for reviewing v2 patches. Hi Kumar, Now that the rpm redesign dependency is resolved, If its not too late could you queue these dt patches for v4.1-rc1 or v4.1-rc2. I tested these patches on APQ8064 based IFC6410 and CMQS600 board with SATA/USB. I also rebased these patches on top of your qcom/dt branch. Thanks, srini Changes since v2 * Some cosmetic fixes spotted by Stephen Boyd. * Rename sata_phy to phy suggested by Stephen Boyd * Dropped MDP patch to track it in different patchset. Changes since v1 * Made regulators board specific, as suggested by Bjorn. * Used correct IRQF flags for rpm, spotted by Bjorn. * Fixed serial lable to be more appropriate, spotted by Bjorn. Nicolas Dechesne (2): ARM: dts: apq8064: Add usb host support to CM QS-600 ARM: dts: apq8064: Add USB OTG support for CM QS-600 Pramod Gurav (1): ARM: dts: apq8064-ifc6410: Add DT alias for serial port Srinivas Kandagatla (8): ARM: dts: apq8064: add RPM regulators support ARM: dts: apq8064-ifc6410: Add basic regulators ARM: dts: apq8064: Add usb host support. ARM: dts: apq8064: Add USB OTG support ARM: dts: apq8064: Add SATA controller support. ARM: dts: apq8064-cm-qs600: Add basic regulators. ARM: dts: apq8064: Move i2c1 pinctrl to apq8064.dtsi ARM: dts: apq8064: add i2c3 node for panel. arch/arm/boot/dts/qcom-apq8064-cm-qs600.dts | 100 ++++++++++++++++ arch/arm/boot/dts/qcom-apq8064-ifc6410.dts | 136 +++++++++++++++++++-- arch/arm/boot/dts/qcom-apq8064.dtsi | 175 +++++++++++++++++++++++++++- 3 files changed, 402 insertions(+), 9 deletions(-) -- 1.9.1 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
