Add initial support for the Samsung Galaxy S20 (x1slte/SM-G980F) phone. It was launched in 2020, and it's based on the Exynos 990 SoC. It has only one configuration with 8GB of RAM and 128GB of UFS 3.0 storage. This device tree adds support for the following: - SimpleFB - 8GB RAM - Buttons Signed-off-by: Umer Uddin <umer.uddin@xxxxxxxxxxxxxxxxxxxxxxxxxx> --- arch/arm64/boot/dts/exynos/Makefile | 1 + .../boot/dts/exynos/exynos990-x1slte.dts | 28 +++++++++++++++++++ 2 files changed, 29 insertions(+) create mode 100644 arch/arm64/boot/dts/exynos/exynos990-x1slte.dts diff --git a/arch/arm64/boot/dts/exynos/Makefile b/arch/arm64/boot/dts/exynos/Makefile index fe47aafcd..ee73e1a2d 100644 --- a/arch/arm64/boot/dts/exynos/Makefile +++ b/arch/arm64/boot/dts/exynos/Makefile @@ -11,5 +11,6 @@ dtb-$(CONFIG_ARCH_EXYNOS) += \ exynos990-c1s.dtb \ exynos990-r8s.dtb \ exynos990-x1s.dtb \ + exynos990-x1slte.dtb \ exynosautov9-sadk.dtb \ exynosautov920-sadk.dtb diff --git a/arch/arm64/boot/dts/exynos/exynos990-x1slte.dts b/arch/arm64/boot/dts/exynos/exynos990-x1slte.dts new file mode 100644 index 000000000..d3720996b --- /dev/null +++ b/arch/arm64/boot/dts/exynos/exynos990-x1slte.dts @@ -0,0 +1,28 @@ +// SPDX-License-Identifier: GPL-2.0 OR BSD-3-Clause +/* + * Samsung Galaxy S20 (x1slte/SM-G980F) device tree source + * + * Copyright (c) 2024, Umer Uddin <umer.uddin@xxxxxxxxxxxxxxxxxxxxxxxxxx> + */ + +/dts-v1/; +#include "exynos990-x1s-common.dtsi" + +/ { + #address-cells = <2>; + #size-cells = <2>; + + model = "Samsung Galaxy S20"; + compatible = "samsung,x1slte", "samsung,exynos990"; + + memory@80000000 { + device_type = "memory"; + reg = <0x0 0x80000000 0x0 0x3ab00000>, + /* Memory hole */ + <0x0 0xc1200000 0x0 0x1ee00000>, + /* Memory hole */ + <0x0 0xe1900000 0x0 0x1e700000>, + /* Memory hole */ + <0x8 0x80000000 0x1 0x7ec00000>; + }; +}; -- 2.43.0