Le 08/12/2024 à 01:20, Christian Marangi a écrit :
Add support for Airoha AN8855 Switch MFD that provide support for a DSA
switch and a NVMEM provider. Also provide support for a virtual MDIO
passthrough as the PHYs address for the switch are shared with the switch
address
Signed-off-by: Christian Marangi <ansuelsmth-Re5JQEeQqe8AvxtiuMwx3w@xxxxxxxxxxxxxxxx>
---
MAINTAINERS | 1 +
drivers/mfd/Kconfig | 9 +
drivers/mfd/Makefile | 1 +
drivers/mfd/airoha-an8855.c | 279 ++++++++++++++++++++++++++
include/linux/mfd/airoha-an8855-mfd.h | 41 ++++
5 files changed, 331 insertions(+)
create mode 100644 drivers/mfd/airoha-an8855.c
create mode 100644 include/linux/mfd/airoha-an8855-mfd.h
diff --git a/MAINTAINERS b/MAINTAINERS
index f3e3f6938824..7f4d7c48b6e1 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -721,6 +721,7 @@ F: Documentation/devicetree/bindings/mfd/airoha,an8855-mfd.yaml
F: Documentation/devicetree/bindings/net/airoha,an8855-mdio.yaml
F: Documentation/devicetree/bindings/net/dsa/airoha,an8855-switch.yaml
F: Documentation/devicetree/bindings/nvmem/airoha,an8855-efuse.yaml
+F: drivers/mfd/airoha-an8855.c
AIROHA ETHERNET DRIVER
M: Lorenzo Bianconi <lorenzo-DgEjT+Ai2ygdnm+yROfE0A@xxxxxxxxxxxxxxxx>
diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
index ae23b317a64e..a83db24336d9 100644
--- a/drivers/mfd/Kconfig
+++ b/drivers/mfd/Kconfig
@@ -53,6 +53,15 @@ config MFD_ALTERA_SYSMGR
using regmap_mmio accesses for ARM32 parts and SMC calls to
EL3 for ARM64 parts.
+config MFD_AIROHA_AN8855
+ bool "Airoha AN8855 Switch MFD"
+ depends on MDIO && OF
+ select MFD_CORE
+ help
+ Support for the Airoha AN8855 Switch MFD. This is a SoC Switch
+ that provide various peripherals. Currently it provides a
provides?
+ DSA switch and a NVMEM provider.
+
config MFD_ACT8945A
tristate "Active-semi ACT8945A"
select MFD_CORE
...
+static int an8855_mfd_probe(struct mdio_device *mdiodev)
+{
+ struct an8855_mfd_priv *priv;
+ struct regmap *regmap;
+
+ priv = devm_kzalloc(&mdiodev->dev, sizeof(*priv), GFP_KERNEL);
+ if (!priv)
+ return -ENOMEM;
+
+ priv->bus = mdiodev->bus;
+ priv->dev = &mdiodev->dev;
+ priv->switch_addr = mdiodev->addr;
+ /* no DMA for mdiobus, mute warning for DMA mask not set */
+ priv->dev->dma_mask = &priv->dev->coherent_dma_mask;
+
+ regmap = devm_regmap_init(priv->dev, NULL, priv,
+ &an8855_regmap_config);
+ if (IS_ERR(regmap)) {
+ dev_err(priv->dev, "regmap initialization failed");
Nitpick: Missing ending \n.
Also, return dev_err_probe() could be used.
+ return PTR_ERR(priv->dev);
+ }
+
+ dev_set_drvdata(&mdiodev->dev, priv);
Is it needed?
There is no dev_get_drvdata() in this patch
+
+ return devm_mfd_add_devices(priv->dev, PLATFORM_DEVID_AUTO, an8855_mfd_devs,
+ ARRAY_SIZE(an8855_mfd_devs), NULL, 0,
+ NULL);
+}
...
CJ
