Hi Krzysztof, On 12/5/2024 10:36 PM, Krzysztof Kozlowski wrote: > On 05/12/2024 11:22, Cheng Jiang wrote: >> Expand the firmware-name property to specify the names of NVM and >> rampatch firmware to load. This update will support loading specific >> firmware (nvm and rampatch) for certain chips, like the QCA6698 >> Bluetooth chip, which shares the same IP core as the WCN6855 but has >> different RF components and RAM sizes, requiring new firmware files. >> >> We might use different connectivity boards on the same platform. For >> example, QCA6698-based boards can support either a two-antenna or >> three-antenna solution, both of which work on the sa8775p-ride platform. >> Due to differences in connectivity boards and variations in RF >> performance from different foundries, different NVM configurations are >> used based on the board ID. >> >> So In firmware-name, if the NVM file has an extension, the NVM file will >> be used. Otherwise, the system will first try the .bNN (board ID) file, >> and if that fails, it will fall back to the .bin file. >> >> Possible configurations: >> firmware-name = "QCA6698/hpnv21.bin", "QCA6698/hpbtfw21.tlv"; >> firmware-name = "QCA6698/hpnv21", "QCA6698/hpbtfw21.tlv"; >> firmware-name = "QCA6698/hpnv21.bin"; > This configuration will fail tests. Please test the binding and DTS > before v4. > Ack. > Best regards, > Krzysztof
