On 04/10/2015 12:15 PM, Ingi Kim wrote: > This patch adds ktd2692 Flash LED driver with LED Flash class > > Change in v6: > - Change goto label to if-else > - Change DT binding style for LED device binding > > Change in v5: > - Clean up the code > - Fix help message of Kconfig > - Fix issue related with regulator and mutex usage > - Remove tab spaces in bindings > > Change in v4: > - Clean up the code > - Modify binding documentation of ktd2692 > > Change in v3: > - Clean up the code > - Add aux gpio pin to control Flash LED > > Change in v2: > - Introduction of LED Flash class as Jacek's comment > - Supplement of binding documentation > - Rename gpio control pin and remove unused pin > - Add regulator for the Flash LED > > Ingi Kim (3): > of: Add vendor prefix for Kinetic technologies > leds: ktd2692: add device tree bindings for ktd2692 > leds: Add ktd2692 flash LED driver > > .../devicetree/bindings/leds/leds-ktd2692.txt | 40 ++ > .../devicetree/bindings/vendor-prefixes.txt | 1 + > drivers/leds/Kconfig | 9 + > drivers/leds/Makefile | 1 + > drivers/leds/leds-ktd2692.c | 408 +++++++++++++++++++++ > 5 files changed, 459 insertions(+) > create mode 100644 Documentation/devicetree/bindings/leds/leds-ktd2692.txt > create mode 100644 drivers/leds/leds-ktd2692.c > Run checkpatch.pl with --strict option on this series.. ./scripts/checkpatch.pl --strict 000* Reported "CHECK: Alignment should match open parenthesis".. -- Varka Bhadram -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html