Ok I can do that, but the driver (axp20x-regulator.c) is using macros to generate these regulator_desc structs. So I have two options, create a new macro with the ramp_delay, or modify the existing macro, using 0 for the regulators I don't know about. Philippe On Thu, Dec 5, 2024 at 5:16 AM Chen-Yu Tsai <wens@xxxxxxxx> wrote: > > On Wed, Dec 4, 2024 at 4:38 AM Philippe Simons > <simons.philippe@xxxxxxxxx> wrote: > > > > AXP datasheet says that ramp delay is 15.625 us/step, > > which is 10mV in our case. > > (CC-ing Mark for knowledge on regulators) > > If this is the property of the PMIC, it probably belongs in the driver, > in "regulator_desc.ramp_delay". > > The "regulator-ramp-delay" in the DT can be used to override this > if the board has excessive ramp delay due to other design reasons. > > > ChenYu > > > add missing regulator-ramp-delay to dcdc regulators accordingly > > > > Signed-off-by: Philippe Simons <simons.philippe@xxxxxxxxx> > > --- > > .../boot/dts/allwinner/sun50i-h700-anbernic-rg35xx-2024.dts | 3 +++ > > 1 file changed, 3 insertions(+) > > > > diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h700-anbernic-rg35xx-2024.dts b/arch/arm64/boot/dts/allwinner/sun50i-h700-anbernic-rg35xx-2024.dts > > index 80ccab7b5..b6e76a804 100644 > > --- a/arch/arm64/boot/dts/allwinner/sun50i-h700-anbernic-rg35xx-2024.dts > > +++ b/arch/arm64/boot/dts/allwinner/sun50i-h700-anbernic-rg35xx-2024.dts > > @@ -238,6 +238,7 @@ reg_dcdc1: dcdc1 { > > regulator-always-on; > > regulator-min-microvolt = <900000>; > > regulator-max-microvolt = <1160000>; > > + regulator-ramp-delay = <640>; > > regulator-name = "vdd-cpu"; > > }; > > > > @@ -245,6 +246,7 @@ reg_dcdc2: dcdc2 { > > regulator-always-on; > > regulator-min-microvolt = <940000>; > > regulator-max-microvolt = <940000>; > > + regulator-ramp-delay = <640>; > > regulator-name = "vdd-gpu-sys"; > > }; > > > > @@ -252,6 +254,7 @@ reg_dcdc3: dcdc3 { > > regulator-always-on; > > regulator-min-microvolt = <1100000>; > > regulator-max-microvolt = <1100000>; > > + regulator-ramp-delay = <640>; > > regulator-name = "vdd-dram"; > > }; > > > > -- > > 2.47.1 > >