Add handling of clock related to secondary MI2S_RX in startup, shutdown
and hw params routines. The handing of MI2S_TX and SEC_MI2S clock is
already there so this requires only placing SECONDARY_MI2S_RX in the
correct switch-case choices.
Signed-off-by: Alexey Klimov <alexey.klimov@xxxxxxxxxx>
---
sound/soc/qcom/sdm845.c | 5 +++--
1 file changed, 3 insertions(+), 2 deletions(-)
diff --git a/sound/soc/qcom/sdm845.c b/sound/soc/qcom/sdm845.c
index a479d7e5b7fb..fcc7df75346f 100644
--- a/sound/soc/qcom/sdm845.c
+++ b/sound/soc/qcom/sdm845.c
@@ -215,6 +215,7 @@ static int sdm845_snd_hw_params(struct snd_pcm_substream *substream,
ret = sdm845_slim_snd_hw_params(substream, params);
break;
case QUATERNARY_MI2S_RX:
+ case SECONDARY_MI2S_RX:
break;
default:
pr_err("%s: invalid dai id 0x%x\n", __func__, cpu_dai->id);
@@ -356,6 +357,7 @@ static int sdm845_snd_startup(struct snd_pcm_substream *substream)
snd_soc_dai_set_fmt(codec_dai, codec_dai_fmt);
break;
+ case SECONDARY_MI2S_RX:
case SECONDARY_MI2S_TX:
codec_dai_fmt |= SND_SOC_DAIFMT_NB_NF | SND_SOC_DAIFMT_I2S;
if (++(data->sec_mi2s_clk_count) == 1) {
@@ -371,8 +373,6 @@ static int sdm845_snd_startup(struct snd_pcm_substream *substream)
Q6AFE_LPASS_CLK_ID_QUAD_MI2S_IBIT,
MI2S_BCLK_RATE, SNDRV_PCM_STREAM_PLAYBACK);
snd_soc_dai_set_fmt(cpu_dai, fmt);
-
-
break;
case QUATERNARY_TDM_RX_0:
@@ -441,6 +441,7 @@ static void sdm845_snd_shutdown(struct snd_pcm_substream *substream)
}
break;
+ case SECONDARY_MI2S_RX:
case SECONDARY_MI2S_TX:
if (--(data->sec_mi2s_clk_count) == 0) {
snd_soc_dai_set_sysclk(cpu_dai,
--
2.45.2
