Extend the list of constants. Keep them the header file for readability. The constants allow the implementation of events like FIFO-watermark, single tap, double tap, freefall, etc. Signed-off-by: Lothar Rubusch <l.rubusch@xxxxxxxxx> --- drivers/iio/accel/adxl345.h | 89 ++++++++++++++++++++++++++++++++----- 1 file changed, 77 insertions(+), 12 deletions(-) diff --git a/drivers/iio/accel/adxl345.h b/drivers/iio/accel/adxl345.h index 3d5c8719db3..ed81d5cf445 100644 --- a/drivers/iio/accel/adxl345.h +++ b/drivers/iio/accel/adxl345.h @@ -9,37 +9,102 @@ #define _ADXL345_H_ #define ADXL345_REG_DEVID 0x00 +#define ADXL345_REG_THRESH_TAP 0x1D #define ADXL345_REG_OFSX 0x1E #define ADXL345_REG_OFSY 0x1F #define ADXL345_REG_OFSZ 0x20 -#define ADXL345_REG_OFS_AXIS(index) (ADXL345_REG_OFSX + (index)) +/* Tap duration */ +#define ADXL345_REG_DUR 0x21 +/* Tap latency */ +#define ADXL345_REG_LATENT 0x22 +/* Tap window */ +#define ADXL345_REG_WINDOW 0x23 +/* Activity threshold */ +#define ADXL345_REG_THRESH_ACT 0x24 +/* Inactivity threshold */ +#define ADXL345_REG_THRESH_INACT 0x25 +/* Inactivity time */ +#define ADXL345_REG_TIME_INACT 0x26 +/* Axis enable control for activity and inactivity detection */ +#define ADXL345_REG_ACT_INACT_CTRL 0x27 +/* Free-fall threshold */ +#define ADXL345_REG_THRESH_FF 0x28 +/* Free-fall time */ +#define ADXL345_REG_TIME_FF 0x29 +/* Axis control for single tap or double tap */ +#define ADXL345_REG_TAP_AXIS 0x2A +/* Source of single tap or double tap */ +#define ADXL345_REG_ACT_TAP_STATUS 0x2B +/* Data rate and power mode control */ #define ADXL345_REG_BW_RATE 0x2C #define ADXL345_REG_POWER_CTL 0x2D +#define ADXL345_REG_INT_ENABLE 0x2E +#define ADXL345_REG_INT_MAP 0x2F +#define ADXL345_REG_INT_SOURCE 0x30 #define ADXL345_REG_DATA_FORMAT 0x31 -#define ADXL345_REG_DATAX0 0x32 -#define ADXL345_REG_DATAY0 0x34 -#define ADXL345_REG_DATAZ0 0x36 -#define ADXL345_REG_DATA_AXIS(index) \ - (ADXL345_REG_DATAX0 + (index) * sizeof(__le16)) +#define ADXL345_REG_XYZ_BASE 0x32 +#define ADXL345_REG_DATA_AXIS(index) \ + (ADXL345_REG_XYZ_BASE + (index) * sizeof(__le16)) + +#define ADXL345_REG_FIFO_CTL 0x38 +#define ADXL345_REG_FIFO_STATUS 0x39 + +#define ADXL345_DEVID 0xE5 + +#define ADXL345_FIFO_CTL_SAMLPES(x) (0x1f & (x)) +#define ADXL345_FIFO_CTL_TRIGGER(x) (0x20 & ((x) << 5)) /* 0: INT1, 1: INT2 */ +#define ADXL345_FIFO_CTL_MODE(x) (0xc0 & ((x) << 6)) +#define ADXL345_INT_DATA_READY BIT(7) +#define ADXL345_INT_SINGLE_TAP BIT(6) +#define ADXL345_INT_DOUBLE_TAP BIT(5) +#define ADXL345_INT_ACTIVITY BIT(4) +#define ADXL345_INT_INACTIVITY BIT(3) +#define ADXL345_INT_FREE_FALL BIT(2) +#define ADXL345_INT_WATERMARK BIT(1) +#define ADXL345_INT_OVERRUN BIT(0) + +#define ADXL345_S_TAP_MSK ADXL345_INT_SINGLE_TAP +#define ADXL345_D_TAP_MSK ADXL345_INT_DOUBLE_TAP + +#define ADXL345_INT1 0 +#define ADXL345_INT2 1 + +/* + * BW_RATE bits - Bandwidth and output data rate. The default value is + * 0x0A, which translates to a 100 Hz output data rate + */ #define ADXL345_BW_RATE GENMASK(3, 0) +#define ADXL345_BW_LOW_POWER BIT(4) #define ADXL345_BASE_RATE_NANO_HZ 97656250LL -#define ADXL345_POWER_CTL_MEASURE BIT(3) #define ADXL345_POWER_CTL_STANDBY 0x00 +#define ADXL345_POWER_CTL_WAKEUP GENMASK(1, 0) +#define ADXL345_POWER_CTL_SLEEP BIT(2) +#define ADXL345_POWER_CTL_MEASURE BIT(3) +#define ADXL345_POWER_CTL_AUTO_SLEEP BIT(4) +#define ADXL345_POWER_CTL_LINK BIT(5) #define ADXL345_DATA_FORMAT_RANGE GENMASK(1, 0) /* Set the g range */ -#define ADXL345_DATA_FORMAT_JUSTIFY BIT(2) /* Left-justified (MSB) mode */ +#define ADXL345_DATA_FORMAT_IS_LEFT_JUSTIFIED BIT(2) #define ADXL345_DATA_FORMAT_FULL_RES BIT(3) /* Up to 13-bits resolution */ -#define ADXL345_DATA_FORMAT_SPI_3WIRE BIT(6) /* 3-wire SPI mode */ -#define ADXL345_DATA_FORMAT_SELF_TEST BIT(7) /* Enable a self test */ - +#define ADXL345_DATA_FORMAT_SPI_3WIRE BIT(6) +#define ADXL345_DATA_FORMAT_SELF_TEST BIT(7) #define ADXL345_DATA_FORMAT_2G 0 #define ADXL345_DATA_FORMAT_4G 1 #define ADXL345_DATA_FORMAT_8G 2 #define ADXL345_DATA_FORMAT_16G 3 -#define ADXL345_DEVID 0xE5 +#define ADXL345_REG_OFS_AXIS(index) (ADXL345_REG_OFSX + (index)) + +/* + * FIFO stores a maximum of 32 entries, which equates to a maximum of 33 entries + * available at any given time because an additional entry is available at the + * output filter of the device. + * + * (see datasheet FIFO_STATUS description on "Entries Bits") + */ +#define ADXL345_FIFO_SIZE 33 /* * In full-resolution mode, scale factor is maintained at ~4 mg/LSB -- 2.39.2
