On Mon, Dec 02, 2024 at 02:29:39PM +0530, Viken Dadhaniya wrote: > Add DT support for QUPv3 Serial Engines. > Why was this resent? Regards, Bjorn > Co-developed-by: Mukesh Kumar Savaliya <quic_msavaliy@xxxxxxxxxxx> > Signed-off-by: Mukesh Kumar Savaliya <quic_msavaliy@xxxxxxxxxxx> > Signed-off-by: Viken Dadhaniya <quic_vdadhani@xxxxxxxxxxx> > --- > > Build Dependencies: > > Base: > https://lore.kernel.org/linux-devicetree/20240926-add_initial_support_for_qcs615-v3-5-e37617e91c62@xxxxxxxxxxx/ > https://lore.kernel.org/linux-devicetree/20240926-add_initial_support_for_qcs615-v3-6-e37617e91c62@xxxxxxxxxxx/ > > Clock: https://lore.kernel.org/linux-devicetree/20240920-qcs615-clock-driver-v2-3-2f6de44eb2aa@xxxxxxxxxxx/ > ICC: https://lore.kernel.org/linux-devicetree/20240924143958.25-2-quic_rlaggysh@xxxxxxxxxxx/ > Apps SMMU: https://lore.kernel.org/all/20241011063112.19087-1-quic_qqzhou@xxxxxxxxxxx/ > GPI documentation: https://lore.kernel.org/r/linux-devicetree/20241115092854.1877369-1-quic_vdadhani@xxxxxxxxxxx/ > > v3 -> v4: > > - Correct gpi compatible string as qcs615 requires an ee_offset of 0x0. > > v3 Link: https://lore.kernel.org/all/20241111084331.2564643-1-quic_vdadhani@xxxxxxxxxxx/ > > v2 -> v3: > > - Modify GPI DMA node name and compatible string. > - Drop buses aliases from SOC DTSI. > - Add GPI compatible for QCS615 in seperate patch. > > v2 Link: https://lore.kernel.org/all/20241028112049.30734-1-quic_vdadhani@xxxxxxxxxxx/ > > v1 -> v2: > > - Add opp-shared property. > - Use QCOM_ICC_TAG_ALWAYS flag in interconnect property. > > v1 Link: https://lore.kernel.org/all/20241011103346.22925-1-quic_vdadhani@xxxxxxxxxxx/ > --- > arch/arm64/boot/dts/qcom/qcs615.dtsi | 627 ++++++++++++++++++++++++++- > 1 file changed, 623 insertions(+), 4 deletions(-) > > diff --git a/arch/arm64/boot/dts/qcom/qcs615.dtsi b/arch/arm64/boot/dts/qcom/qcs615.dtsi > index 865ead601f85..cccfde956973 100644 > --- a/arch/arm64/boot/dts/qcom/qcs615.dtsi > +++ b/arch/arm64/boot/dts/qcom/qcs615.dtsi > @@ -5,6 +5,7 @@ > > #include <dt-bindings/clock/qcom,qcs615-gcc.h> > #include <dt-bindings/clock/qcom,rpmh.h> > +#include <dt-bindings/dma/qcom-gpi.h> > #include <dt-bindings/interconnect/qcom,icc.h> > #include <dt-bindings/interconnect/qcom,qcs615-rpmh.h> > #include <dt-bindings/interrupt-controller/arm-gic.h> > @@ -296,6 +297,26 @@ mc_virt: interconnect-2 { > qcom,bcm-voters = <&apps_bcm_voter>; > }; > > + qup_opp_table: opp-table-qup { > + compatible = "operating-points-v2"; > + opp-shared; > + > + opp-75000000 { > + opp-hz = /bits/ 64 <75000000>; > + required-opps = <&rpmhpd_opp_low_svs>; > + }; > + > + opp-100000000 { > + opp-hz = /bits/ 64 <100000000>; > + required-opps = <&rpmhpd_opp_svs>; > + }; > + > + opp-128000000 { > + opp-hz = /bits/ 64 <128000000>; > + required-opps = <&rpmhpd_opp_nom>; > + }; > + }; > + > psci { > compatible = "arm,psci-1.0"; > method = "smc"; > @@ -392,6 +413,24 @@ qfprom: efuse@780000 { > #size-cells = <1>; > }; > > + gpi_dma0: dma-controller@800000 { > + compatible = "qcom,qcs615-gpi-dma", "qcom,sdm845-gpi-dma"; > + reg = <0x0 0x800000 0x0 0x60000>; > + #dma-cells = <3>; > + interrupts = <GIC_SPI 244 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 245 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 246 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 247 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 248 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 249 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 250 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 251 IRQ_TYPE_LEVEL_HIGH>; > + dma-channels = <8>; > + dma-channel-mask = <0xf>; > + iommus = <&apps_smmu 0xd6 0x0>; > + status = "disabled"; > + }; > + > qupv3_id_0: geniqup@8c0000 { > compatible = "qcom,geni-se-qup"; > reg = <0x0 0x8c0000 0x0 0x6000>; > @@ -400,6 +439,7 @@ qupv3_id_0: geniqup@8c0000 { > <&gcc GCC_QUPV3_WRAP_0_S_AHB_CLK>; > clock-names = "m-ahb", > "s-ahb"; > + iommus = <&apps_smmu 0xc3 0x0>; > #address-cells = <2>; > #size-cells = <2>; > status = "disabled"; > @@ -412,13 +452,416 @@ uart0: serial@880000 { > pinctrl-0 = <&qup_uart0_tx>, <&qup_uart0_rx>; > pinctrl-names = "default"; > interrupts = <GIC_SPI 601 IRQ_TYPE_LEVEL_HIGH>; > - interconnects = <&aggre1_noc MASTER_QUP_0 0 > - &mc_virt SLAVE_EBI1 0>, > - <&gem_noc MASTER_APPSS_PROC 0 > - &config_noc SLAVE_QUP_0 0>; > + interconnects = <&aggre1_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS > + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>, > + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS > + &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>; > + interconnect-names = "qup-core", > + "qup-config"; > + power-domains = <&rpmhpd RPMHPD_CX>; > + status = "disabled"; > + }; > + > + i2c1: i2c@884000 { > + compatible = "qcom,geni-i2c"; > + reg = <0x0 0x884000 0x0 0x4000>; > + #address-cells = <1>; > + #size-cells = <0>; > + interrupts = <GIC_SPI 602 IRQ_TYPE_LEVEL_HIGH>; > + clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>; > + clock-names = "se"; > + pinctrl-0 = <&qup_i2c1_data_clk>; > + pinctrl-names = "default"; > + interconnects = <&aggre1_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS > + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>, > + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS > + &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>, > + <&aggre1_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS > + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; > + interconnect-names = "qup-core", > + "qup-config", > + "qup-memory"; > + power-domains = <&rpmhpd RPMHPD_CX>; > + dmas = <&gpi_dma0 0 1 QCOM_GPI_I2C>, > + <&gpi_dma0 1 1 QCOM_GPI_I2C>; > + dma-names = "tx", > + "rx"; > + status = "disabled"; > + }; > + > + i2c2: i2c@888000 { > + compatible = "qcom,geni-i2c"; > + reg = <0x0 0x888000 0x0 0x4000>; > + #address-cells = <1>; > + #size-cells = <0>; > + interrupts = <GIC_SPI 603 IRQ_TYPE_LEVEL_HIGH>; > + clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>; > + clock-names = "se"; > + pinctrl-0 = <&qup_i2c2_data_clk>; > + pinctrl-names = "default"; > + interconnects = <&aggre1_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS > + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>, > + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS > + &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>, > + <&aggre1_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS > + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; > + interconnect-names = "qup-core", > + "qup-config", > + "qup-memory"; > + power-domains = <&rpmhpd RPMHPD_CX>; > + dmas = <&gpi_dma0 0 2 QCOM_GPI_I2C>, > + <&gpi_dma0 1 2 QCOM_GPI_I2C>; > + dma-names = "tx", > + "rx"; > + status = "disabled"; > + }; > + > + spi2: spi@888000 { > + compatible = "qcom,geni-spi"; > + reg = <0x0 0x00888000 0x0 0x4000>; > + interrupts = <GIC_SPI 603 IRQ_TYPE_LEVEL_HIGH>; > + clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>; > + clock-names = "se"; > + pinctrl-0 = <&qup_spi2_data_clk>, <&qup_spi2_cs>; > + pinctrl-names = "default"; > + interconnects = <&aggre1_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS > + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>, > + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS > + &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>; > + interconnect-names = "qup-core", > + "qup-config"; > + power-domains = <&rpmhpd RPMHPD_CX>; > + dmas = <&gpi_dma0 0 2 QCOM_GPI_SPI>, > + <&gpi_dma0 1 2 QCOM_GPI_SPI>; > + dma-names = "tx", > + "rx"; > + #address-cells = <1>; > + #size-cells = <0>; > + status = "disabled"; > + }; > + > + uart2: serial@888000 { > + compatible = "qcom,geni-uart"; > + reg = <0x0 0x00888000 0x0 0x4000>; > + interrupts = <GIC_SPI 603 IRQ_TYPE_LEVEL_HIGH>; > + clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>; > + clock-names = "se"; > + pinctrl-0 = <&qup_uart2_cts>, <&qup_uart2_rts>, > + <&qup_uart2_tx>, <&qup_uart2_rx>; > + pinctrl-names = "default"; > + interconnects = <&aggre1_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS > + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>, > + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS > + &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>; > + interconnect-names = "qup-core", > + "qup-config"; > + power-domains = <&rpmhpd RPMHPD_CX>; > + status = "disabled"; > + }; > + > + i2c3: i2c@88c000 { > + compatible = "qcom,geni-i2c"; > + reg = <0x0 0x88c000 0x0 0x4000>; > + #address-cells = <1>; > + #size-cells = <0>; > + interrupts = <GIC_SPI 604 IRQ_TYPE_LEVEL_HIGH>; > + clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>; > + clock-names = "se"; > + pinctrl-0 = <&qup_i2c3_data_clk>; > + pinctrl-names = "default"; > + interconnects = <&aggre1_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS > + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>, > + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS > + &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>, > + <&aggre1_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS > + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; > + interconnect-names = "qup-core", > + "qup-config", > + "qup-memory"; > + power-domains = <&rpmhpd RPMHPD_CX>; > + dmas = <&gpi_dma0 0 3 QCOM_GPI_I2C>, > + <&gpi_dma0 1 3 QCOM_GPI_I2C>; > + dma-names = "tx", > + "rx"; > + status = "disabled"; > + }; > + }; > + > + gpi_dma1: dma-controller@a00000 { > + compatible = "qcom,qcs615-gpi-dma", "qcom,sdm845-gpi-dma"; > + reg = <0x0 0xa00000 0x0 0x60000>; > + #dma-cells = <3>; > + interrupts = <GIC_SPI 279 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 280 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 281 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 282 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 283 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 284 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 293 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 294 IRQ_TYPE_LEVEL_HIGH>; > + dma-channels = <8>; > + dma-channel-mask = <0xf>; > + iommus = <&apps_smmu 0x376 0x0>; > + status = "disabled"; > + }; > + > + qupv3_id_1: geniqup@ac0000 { > + compatible = "qcom,geni-se-qup"; > + reg = <0x0 0xac0000 0x0 0x2000>; > + ranges; > + clocks = <&gcc GCC_QUPV3_WRAP_1_M_AHB_CLK>, > + <&gcc GCC_QUPV3_WRAP_1_S_AHB_CLK>; > + clock-names = "m-ahb", > + "s-ahb"; > + iommus = <&apps_smmu 0x363 0x0>; > + #address-cells = <2>; > + #size-cells = <2>; > + status = "disabled"; > + > + i2c4: i2c@a80000 { > + compatible = "qcom,geni-i2c"; > + reg = <0x0 0xa80000 0x0 0x4000>; > + clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>; > + clock-names = "se"; > + pinctrl-0 = <&qup_i2c4_data_clk>; > + pinctrl-names = "default"; > + interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>; > + #address-cells = <1>; > + #size-cells = <0>; > + interconnects = <&aggre1_noc MASTER_BLSP_1 QCOM_ICC_TAG_ALWAYS > + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>, > + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS > + &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>, > + <&aggre1_noc MASTER_BLSP_1 QCOM_ICC_TAG_ALWAYS > + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; > + interconnect-names = "qup-core", > + "qup-config", > + "qup-memory"; > + power-domains = <&rpmhpd RPMHPD_CX>; > + required-opps = <&rpmhpd_opp_low_svs>; > + dmas = <&gpi_dma1 0 0 QCOM_GPI_I2C>, > + <&gpi_dma1 1 0 QCOM_GPI_I2C>; > + dma-names = "tx", > + "rx"; > + status = "disabled"; > + }; > + > + spi4: spi@a80000 { > + compatible = "qcom,geni-spi"; > + reg = <0x0 0xa80000 0x0 0x4000>; > + clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>; > + clock-names = "se"; > + pinctrl-0 = <&qup_spi4_data_clk>, <&qup_spi4_cs>; > + pinctrl-names = "default"; > + interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>; > + #address-cells = <1>; > + #size-cells = <0>; > + interconnects = <&aggre1_noc MASTER_BLSP_1 QCOM_ICC_TAG_ALWAYS > + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>, > + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS > + &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>; > + interconnect-names = "qup-core", > + "qup-config"; > + power-domains = <&rpmhpd RPMHPD_CX>; > + operating-points-v2 = <&qup_opp_table>; > + dmas = <&gpi_dma1 0 0 QCOM_GPI_SPI>, > + <&gpi_dma1 1 0 QCOM_GPI_SPI>; > + dma-names = "tx", > + "rx"; > + status = "disabled"; > + }; > + > + uart4: serial@a80000 { > + compatible = "qcom,geni-uart"; > + reg = <0x0 0xa80000 0x0 0x4000>; > + clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>; > + clock-names = "se"; > + pinctrl-0 = <&qup_uart4_cts>, <&qup_uart4_rts>, > + <&qup_uart4_tx>, <&qup_uart4_rx>; > + pinctrl-names = "default"; > + interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>; > + interconnects = <&aggre1_noc MASTER_BLSP_1 QCOM_ICC_TAG_ALWAYS > + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>, > + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS > + &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>; > + interconnect-names = "qup-core", > + "qup-config"; > + power-domains = <&rpmhpd RPMHPD_CX>; > + operating-points-v2 = <&qup_opp_table>; > + status = "disabled"; > + }; > + > + i2c5: i2c@a84000 { > + compatible = "qcom,geni-i2c"; > + reg = <0x0 0xa84000 0x0 0x4000>; > + clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>; > + clock-names = "se"; > + pinctrl-0 = <&qup_i2c5_data_clk>; > + pinctrl-names = "default"; > + interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>; > + #address-cells = <1>; > + #size-cells = <0>; > + interconnects = <&aggre1_noc MASTER_BLSP_1 QCOM_ICC_TAG_ALWAYS > + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>, > + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS > + &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>, > + <&aggre1_noc MASTER_BLSP_1 QCOM_ICC_TAG_ALWAYS > + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; > + interconnect-names = "qup-core", > + "qup-config", > + "qup-memory"; > + power-domains = <&rpmhpd RPMHPD_CX>; > + required-opps = <&rpmhpd_opp_low_svs>; > + dmas = <&gpi_dma1 0 1 QCOM_GPI_I2C>, > + <&gpi_dma1 1 1 QCOM_GPI_I2C>; > + dma-names = "tx", > + "rx"; > + status = "disabled"; > + }; > + > + i2c6: i2c@a88000 { > + compatible = "qcom,geni-i2c"; > + reg = <0x0 0xa88000 0x0 0x4000>; > + clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>; > + clock-names = "se"; > + pinctrl-0 = <&qup_i2c6_data_clk>; > + pinctrl-names = "default"; > + interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>; > + #address-cells = <1>; > + #size-cells = <0>; > + interconnects = <&aggre1_noc MASTER_BLSP_1 QCOM_ICC_TAG_ALWAYS > + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>, > + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS > + &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>, > + <&aggre1_noc MASTER_BLSP_1 QCOM_ICC_TAG_ALWAYS > + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; > + interconnect-names = "qup-core", > + "qup-config", > + "qup-memory"; > + power-domains = <&rpmhpd RPMHPD_CX>; > + required-opps = <&rpmhpd_opp_low_svs>; > + dmas = <&gpi_dma1 0 2 QCOM_GPI_I2C>, > + <&gpi_dma1 1 2 QCOM_GPI_I2C>; > + dma-names = "tx", > + "rx"; > + status = "disabled"; > + }; > + > + spi6: spi@a88000 { > + compatible = "qcom,geni-spi"; > + reg = <0x0 0xa88000 0x0 0x4000>; > + clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>; > + clock-names = "se"; > + pinctrl-0 = <&qup_spi6_data_clk>, <&qup_spi6_cs>; > + pinctrl-names = "default"; > + interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>; > + #address-cells = <1>; > + #size-cells = <0>; > + interconnects = <&aggre1_noc MASTER_BLSP_1 QCOM_ICC_TAG_ALWAYS > + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>, > + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS > + &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>; > + interconnect-names = "qup-core", > + "qup-config"; > + power-domains = <&rpmhpd RPMHPD_CX>; > + operating-points-v2 = <&qup_opp_table>; > + dmas = <&gpi_dma1 0 2 QCOM_GPI_SPI>, > + <&gpi_dma1 1 2 QCOM_GPI_SPI>; > + dma-names = "tx", > + "rx"; > + status = "disabled"; > + }; > + > + uart6: serial@a88000 { > + compatible = "qcom,geni-uart"; > + reg = <0x0 0xa88000 0x0 0x4000>; > + clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>; > + clock-names = "se"; > + pinctrl-0 = <&qup_uart6_cts>, <&qup_uart6_rts>, > + <&qup_uart6_tx>, <&qup_uart6_rx>; > + pinctrl-names = "default"; > + interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>; > + interconnects = <&aggre1_noc MASTER_BLSP_1 QCOM_ICC_TAG_ALWAYS > + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>, > + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS > + &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>; > + interconnect-names = "qup-core", > + "qup-config"; > + power-domains = <&rpmhpd RPMHPD_CX>; > + operating-points-v2 = <&qup_opp_table>; > + status = "disabled"; > + }; > + > + i2c7: i2c@a8c000 { > + compatible = "qcom,geni-i2c"; > + reg = <0x0 0xa8c000 0x0 0x4000>; > + clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>; > + clock-names = "se"; > + pinctrl-0 = <&qup_i2c7_data_clk>; > + pinctrl-names = "default"; > + interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>; > + #address-cells = <1>; > + #size-cells = <0>; > + interconnects = <&aggre1_noc MASTER_BLSP_1 QCOM_ICC_TAG_ALWAYS > + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>, > + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS > + &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>, > + <&aggre1_noc MASTER_BLSP_1 QCOM_ICC_TAG_ALWAYS > + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; > + interconnect-names = "qup-core", > + "qup-config", > + "qup-memory"; > + power-domains = <&rpmhpd RPMHPD_CX>; > + required-opps = <&rpmhpd_opp_low_svs>; > + dmas = <&gpi_dma1 0 3 QCOM_GPI_I2C>, > + <&gpi_dma1 1 3 QCOM_GPI_I2C>; > + dma-names = "tx", > + "rx"; > + status = "disabled"; > + }; > + > + spi7: spi@a8c000 { > + compatible = "qcom,geni-spi"; > + reg = <0x0 0xa8c000 0x0 0x4000>; > + clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>; > + clock-names = "se"; > + pinctrl-0 = <&qup_spi7_data_clk>, <&qup_spi7_cs>; > + pinctrl-names = "default"; > + interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>; > + #address-cells = <1>; > + #size-cells = <0>; > + interconnects = <&aggre1_noc MASTER_BLSP_1 QCOM_ICC_TAG_ALWAYS > + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>, > + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS > + &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>; > + interconnect-names = "qup-core", > + "qup-config"; > + power-domains = <&rpmhpd RPMHPD_CX>; > + operating-points-v2 = <&qup_opp_table>; > + dmas = <&gpi_dma1 0 3 QCOM_GPI_SPI>, > + <&gpi_dma1 1 3 QCOM_GPI_SPI>; > + dma-names = "tx", > + "rx"; > + status = "disabled"; > + }; > + > + uart7: serial@a8c000 { > + compatible = "qcom,geni-uart"; > + reg = <0x0 0xa8c000 0x0 0x4000>; > + clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>; > + clock-names = "se"; > + pinctrl-0 = <&qup_uart7_cts>, <&qup_uart7_rts>, > + <&qup_uart7_tx>, <&qup_uart7_rx>; > + pinctrl-names = "default"; > + interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>; > + interconnects = <&aggre1_noc MASTER_BLSP_1 QCOM_ICC_TAG_ALWAYS > + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>, > + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS > + &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>; > interconnect-names = "qup-core", > "qup-config"; > power-domains = <&rpmhpd RPMHPD_CX>; > + operating-points-v2 = <&qup_opp_table>; > status = "disabled"; > }; > }; > @@ -478,6 +921,102 @@ tlmm: pinctrl@3100000 { > #interrupt-cells = <2>; > wakeup-parent = <&pdc>; > > + qup_i2c1_data_clk: qup-i2c1-data-clk-state { > + pins = "gpio4", "gpio5"; > + function = "qup0"; > + > + }; > + > + qup_i2c2_data_clk: qup-i2c2-data-clk-state { > + pins = "gpio0", "gpio1"; > + function = "qup0"; > + }; > + > + qup_i2c3_data_clk: qup-i2c3-data-clk-state { > + pins = "gpio18", "gpio19"; > + function = "qup0"; > + }; > + > + qup_i2c4_data_clk: qup-i2c4-data-clk-state { > + pins = "gpio20", "gpio21"; > + function = "qup1"; > + }; > + > + qup_i2c5_data_clk: qup-i2c5-data-clk-state { > + pins = "gpio14", "gpio15"; > + function = "qup1"; > + }; > + > + qup_i2c6_data_clk: qup-i2c6-data-clk-state { > + pins = "gpio6", "gpio7"; > + function = "qup1"; > + }; > + > + qup_i2c7_data_clk: qup-i2c7-data-clk-state { > + pins = "gpio10", "gpio11"; > + function = "qup1"; > + }; > + > + qup_spi2_data_clk: qup-spi2-data-clk-state { > + pins = "gpio0", "gpio1", "gpio2"; > + function = "qup0"; > + }; > + > + qup_spi2_cs: qup-spi2-cs-state { > + pins = "gpio3"; > + function = "qup0"; > + }; > + > + qup_spi2_cs_gpio: qup-spi2-cs-gpio-state { > + pins = "gpio3"; > + function = "gpio"; > + }; > + > + qup_spi4_data_clk: qup-spi4-data-clk-state { > + pins = "gpio20", "gpio21", "gpio22"; > + function = "qup1"; > + }; > + > + qup_spi4_cs: qup-spi4-cs-state { > + pins = "gpio23"; > + function = "qup1"; > + }; > + > + qup_spi4_cs_gpio: qup-spi4-cs-gpio-state { > + pins = "gpio23"; > + function = "gpio"; > + }; > + > + qup_spi6_data_clk: qup-spi6-data-clk-state { > + pins = "gpio6", "gpio7", "gpio8"; > + function = "qup1"; > + }; > + > + qup_spi6_cs: qup-spi6-cs-state { > + pins = "gpio9"; > + function = "qup1"; > + }; > + > + qup_spi6_cs_gpio: qup-spi6-cs-gpio-state { > + pins = "gpio9"; > + function = "gpio"; > + }; > + > + qup_spi7_data_clk: qup-spi7-data-clk-state { > + pins = "gpio10", "gpio11", "gpio12"; > + function = "qup1"; > + }; > + > + qup_spi7_cs: qup-spi7-cs-state { > + pins = "gpio13"; > + function = "qup1"; > + }; > + > + qup_spi7_cs_gpio: qup-spi7-cs-gpio-state { > + pins = "gpio13"; > + function = "gpio"; > + }; > + > qup_uart0_tx: qup-uart0-tx-state { > pins = "gpio16"; > function = "qup0"; > @@ -487,6 +1026,86 @@ qup_uart0_rx: qup-uart0-rx-state { > pins = "gpio17"; > function = "qup0"; > }; > + > + qup_uart2_cts: qup-uart2-cts-state { > + pins = "gpio0"; > + function = "qup0"; > + }; > + > + qup_uart2_rts: qup-uart2-rts-state { > + pins = "gpio1"; > + function = "qup0"; > + }; > + > + qup_uart2_tx: qup-uart2-tx-state { > + pins = "gpio2"; > + function = "qup0"; > + }; > + > + qup_uart2_rx: qup-uart2-rx-state { > + pins = "gpio3"; > + function = "qup0"; > + }; > + > + qup_uart4_cts: qup-uart4-cts-state { > + pins = "gpio20"; > + function = "qup1"; > + }; > + > + qup_uart4_rts: qup-uart4-rts-state { > + pins = "gpio21"; > + function = "qup1"; > + }; > + > + qup_uart4_tx: qup-uart4-tx-state { > + pins = "gpio22"; > + function = "qup1"; > + }; > + > + qup_uart4_rx: qup-uart4-rx-state { > + pins = "gpio23"; > + function = "qup1"; > + }; > + > + qup_uart6_cts: qup-uart6-cts-state { > + pins = "gpio6"; > + function = "qup1"; > + }; > + > + qup_uart6_rts: qup-uart6-rts-state { > + pins = "gpio7"; > + function = "qup1"; > + }; > + > + qup_uart6_tx: qup-uart6-tx-state { > + pins = "gpio8"; > + function = "qup1"; > + }; > + > + qup_uart6_rx: qup-uart6-rx-state { > + pins = "gpio9"; > + function = "qup1"; > + }; > + > + qup_uart7_cts: qup-uart7-cts-state { > + pins = "gpio10"; > + function = "qup1"; > + }; > + > + qup_uart7_rts: qup-uart7-rts-state { > + pins = "gpio11"; > + function = "qup1"; > + }; > + > + qup_uart7_tx: qup-uart7-tx-state { > + pins = "gpio12"; > + function = "qup1"; > + }; > + > + qup_uart7_rx: qup-uart7-rx-state { > + pins = "gpio13"; > + function = "qup1"; > + }; > }; > > dc_noc: interconnect@9160000 { > -- > 2.34.1 >
