Hi, Mihai,
On 22.11.2024 10:05, Mihai Sain wrote:
> Add PAC1934 support in order to monitor the board power consumption.
> Device is connected on flexcom7 in twi mode.
>
> [root@SAM9X75 ~]$ awk -f pac1934.awk
> VDD3V3 current: 10.675 mA, voltage: 3295.41 mV
> VDDOUT4 current: 5.7625 mA, voltage: 1196.78 mV
> VDDCORE current: 115.442 mA, voltage: 1243.65 mV
> VDDIODDR current: 29.585 mA, voltage: 1345.21 mV
>
> Signed-off-by: Mihai Sain <mihai.sain@xxxxxxxxxxxxx>
> ---
> .../dts/microchip/at91-sam9x75_curiosity.dts | 52 +++++++++++++++++++
> 1 file changed, 52 insertions(+)
>
> diff --git a/arch/arm/boot/dts/microchip/at91-sam9x75_curiosity.dts b/arch/arm/boot/dts/microchip/at91-sam9x75_curiosity.dts
> index d453800f8e35..76d7a756e08c 100644
> --- a/arch/arm/boot/dts/microchip/at91-sam9x75_curiosity.dts
> +++ b/arch/arm/boot/dts/microchip/at91-sam9x75_curiosity.dts
> @@ -198,6 +198,52 @@ regulator-state-standby {
> };
> };
>
> +&flx7 {
> + atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_TWI>;
> + status = "okay";
> +};
> +
> +&i2c7 {
> + dmas = <0>, <0>;
> + i2c-analog-filter;
> + i2c-digital-filter;
> + i2c-digital-filter-width-ns = <35>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_flx7_default>;
> + status = "okay";
> +
> + power-monitor@10 {
> + compatible = "microchip,pac1934";
> + reg = <0x10>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + channel@1 {
> + reg = <0x1>;
> + shunt-resistor-micro-ohms = <10000>;
> + label = "VDD3V3";
> + };
> +
> + channel@2 {
> + reg = <0x2>;
> + shunt-resistor-micro-ohms = <10000>;
> + label = "VDDOUT4";
On the schematics at [1] this seems to be named DCDC4. Is there a mistake
on [1] or this patch needs adjustments? If so, I can do it while applying.
Thank you,
Claudiu
[1]
https://ww1.microchip.com/downloads/aemDocuments/documents/MPU32/ProductDocuments/UserGuides/SAM9X75-Curiosity-User-Guide-DS60001859.pdf
> + };
> +
> + channel@3 {
> + reg = <0x3>;
> + shunt-resistor-micro-ohms = <10000>;
> + label = "VDDCORE";
> + };
> +
> + channel@4 {
> + reg = <0x4>;
> + shunt-resistor-micro-ohms = <10000>;
> + label = "VDDIODDR";
> + };
> + };
> +};
> +
> &i2s {
> pinctrl-names = "default";
> pinctrl-0 = <&pinctrl_i2s_default>;
> @@ -231,6 +277,12 @@ pinctrl_flx6_default: flx6-default {
> <AT91_PIOA 24 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>,
> <AT91_PIOA 25 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;
> };
> +
> + pinctrl_flx7_default: flx7-default {
> + atmel,pins =
> + <AT91_PIOC 0 AT91_PERIPH_C AT91_PINCTRL_PULL_UP>,
> + <AT91_PIOC 1 AT91_PERIPH_C AT91_PINCTRL_PULL_UP>;
> + };
> };
>
> gpio-keys {
