[PATCH v2 05/15] arm64: dts: imx8mm-phycore-som: add descriptions to nodes

[Andrej Picej <andrej.picej@xxxxxxxxx>]

From: Yannic Moog <y.moog@xxxxxxxxx>

Add missing EEPROM and RTC descriptions. Also use eMMC with
lower-case "e".

Signed-off-by: Yannic Moog <y.moog@xxxxxxxxx>
Signed-off-by: Andrej Picej <andrej.picej@xxxxxxxxx>
---
Changes in v2:
 - no change
---
 arch/arm64/boot/dts/freescale/imx8mm-phycore-som.dtsi | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/freescale/imx8mm-phycore-som.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-phycore-som.dtsi
index 7e859c65317a..cced82226c6d 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm-phycore-som.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mm-phycore-som.dtsi
@@ -290,6 +290,7 @@ sn65dsi83: bridge@2d {
 		status = "disabled";
 	};
 
+	/* EEPROM */
 	eeprom@51 {
 		compatible = "atmel,24c32";
 		pagesize = <32>;
@@ -297,6 +298,7 @@ eeprom@51 {
 		vcc-supply = <&reg_vdd_3v3_s>;
 	};
 
+	/* RTC */
 	rv3028: rtc@52 {
 		compatible = "microcrystal,rv3028";
 		interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
@@ -307,7 +309,7 @@ rv3028: rtc@52 {
 	};
 };
 
-/* EMMC */
+/* eMMC */
 &usdhc3 {
 	assigned-clocks = <&clk IMX8MM_CLK_USDHC3_ROOT>;
 	assigned-clock-rates = <400000000>;
-- 
2.34.1