From: Nicolas Dechesne <nicolas.dechesne@xxxxxxxxxx>
This patch adds USB OTG support on USB1 for Compulab QS-600 Board.
Signed-off-by: Nicolas Dechesne <nicolas.dechesne@xxxxxxxxxx>
---
arch/arm/boot/dts/qcom-apq8064-cm-qs600.dts | 14 ++++++++++++++
1 file changed, 14 insertions(+)
diff --git a/arch/arm/boot/dts/qcom-apq8064-cm-qs600.dts b/arch/arm/boot/dts/qcom-apq8064-cm-qs600.dts
index 220ff19..06307b9 100644
--- a/arch/arm/boot/dts/qcom-apq8064-cm-qs600.dts
+++ b/arch/arm/boot/dts/qcom-apq8064-cm-qs600.dts
@@ -40,6 +40,11 @@
};
};
+ /* OTG */
+ usb1_phy:phy@12500000 {
+ status = "ok";
+ };
+
usb3_phy:phy@12520000 {
status = "ok";
};
@@ -48,6 +53,15 @@
status = "ok";
};
+ gadget1:gadget@12500000 {
+ status = "ok";
+ };
+
+ /* OTG */
+ usb1: usb@12500000 {
+ status = "ok";
+ };
+
usb3: usb@12520000 {
status = "ok";
};
--
1.9.1
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
