[PATCH 1/4] arm64: dts: rockchip: sort nodes in .dts for Radxa ROCK 5B

[FUKAUMI Naoki <naoki@xxxxxxxxx>]

sort alphanumerically.

Signed-off-by: FUKAUMI Naoki <naoki@xxxxxxxxx>
---
 .../boot/dts/rockchip/rk3588-rock-5b.dts      | 56 +++++++++----------
 1 file changed, 28 insertions(+), 28 deletions(-)

diff --git a/arch/arm64/boot/dts/rockchip/rk3588-rock-5b.dts b/arch/arm64/boot/dts/rockchip/rk3588-rock-5b.dts
index fbe231973b24..08f5efeeac9c 100644
--- a/arch/arm64/boot/dts/rockchip/rk3588-rock-5b.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3588-rock-5b.dts
@@ -473,21 +473,6 @@ &sdhci {
 	status = "okay";
 };
 
-&sdmmc {
-	max-frequency = <200000000>;
-	no-sdio;
-	no-mmc;
-	bus-width = <4>;
-	cap-mmc-highspeed;
-	cap-sd-highspeed;
-	cd-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_LOW>;
-	disable-wp;
-	sd-uhs-sdr104;
-	vmmc-supply = <&vcc_3v3_s3>;
-	vqmmc-supply = <&vccio_sd_s0>;
-	status = "okay";
-};
-
 &sdio {
 	max-frequency = <200000000>;
 	no-sd;
@@ -509,6 +494,21 @@ &sdio {
 	status = "okay";
 };
 
+&sdmmc {
+	max-frequency = <200000000>;
+	no-sdio;
+	no-mmc;
+	bus-width = <4>;
+	cap-mmc-highspeed;
+	cap-sd-highspeed;
+	cd-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_LOW>;
+	disable-wp;
+	sd-uhs-sdr104;
+	vmmc-supply = <&vcc_3v3_s3>;
+	vqmmc-supply = <&vccio_sd_s0>;
+	status = "okay";
+};
+
 &sfc {
 	pinctrl-names = "default";
 	pinctrl-0 = <&fspim2_pins>;
@@ -523,12 +523,6 @@ flash@0 {
 	};
 };
 
-&uart6 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&uart6m1_xfer &uart6m1_ctsn &uart6m1_rtsn>;
-	status = "okay";
-};
-
 &spi2 {
 	status = "okay";
 	assigned-clocks = <&cru CLK_SPI2>;
@@ -858,11 +852,6 @@ &tsadc {
 	status = "okay";
 };
 
-&uart2 {
-	pinctrl-0 = <&uart2m0_xfer>;
-	status = "okay";
-};
-
 &u2phy1 {
 	status = "okay";
 };
@@ -891,7 +880,14 @@ &u2phy3_host {
 	status = "okay";
 };
 
-&usbdp_phy1 {
+&uart2 {
+	pinctrl-0 = <&uart2m0_xfer>;
+	status = "okay";
+};
+
+&uart6 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart6m1_xfer &uart6m1_ctsn &uart6m1_rtsn>;
 	status = "okay";
 };
 
@@ -920,7 +916,7 @@ &usb_host2_xhci {
 	status = "okay";
 };
 
-&vop_mmu {
+&usbdp_phy1 {
 	status = "okay";
 };
 
@@ -928,6 +924,10 @@ &vop {
 	status = "okay";
 };
 
+&vop_mmu {
+	status = "okay";
+};
+
 &vp0 {
 	vp0_out_hdmi0: endpoint@ROCKCHIP_VOP2_EP_HDMI0 {
 		reg = <ROCKCHIP_VOP2_EP_HDMI0>;
-- 
2.43.0