[PATCH 01/10] ARM: dts: apq8064: add RPM regulators support

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




This patch adds rpm node to apq8064 dt as rpm would be used by other
devices for regulator support. Also adds all the regulators in the rpm.

Most content of this patch was originally posted by Stephen Boyd on the
list.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@xxxxxxxxxx>
---
 arch/arm/boot/dts/qcom-apq8064.dtsi | 272 ++++++++++++++++++++++++++++++++++++
 1 file changed, 272 insertions(+)

diff --git a/arch/arm/boot/dts/qcom-apq8064.dtsi b/arch/arm/boot/dts/qcom-apq8064.dtsi
index 6c15112..d9166eb 100644
--- a/arch/arm/boot/dts/qcom-apq8064.dtsi
+++ b/arch/arm/boot/dts/qcom-apq8064.dtsi
@@ -3,6 +3,7 @@
 #include "skeleton.dtsi"
 #include <dt-bindings/clock/qcom,gcc-msm8960.h>
 #include <dt-bindings/clock/qcom,mmcc-msm8960.h>
+#include <dt-bindings/mfd/qcom-rpm.h>
 #include <dt-bindings/soc/qcom,gsbi.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 
@@ -276,6 +277,277 @@
 			#reset-cells = <1>;
 		};
 
+		l2cc: clock-controller@2011000 {
+			compatible	= "syscon";
+			reg		= <0x2011000 0x1000>;
+		};
+
+		rpm@108000 {
+			compatible	= "qcom,rpm-apq8064";
+			reg		= <0x108000 0x1000>;
+			qcom,ipc	= <&l2cc 0x8 2>;
+
+			interrupts	= <GIC_SPI 19 IRQ_TYPE_NONE>,
+					  <GIC_SPI 21 IRQ_TYPE_NONE>,
+					  <GIC_SPI 22 IRQ_TYPE_NONE>;
+			interrupt-names	= "ack", "err", "wakeup";
+
+			regulators {
+				compatible = "qcom,rpm-pm8921-regulators";
+				vdd_l1_l2_l12_l18-supply = <&pm8921_s4>;
+				vin_lvs1_3_6-supply = <&pm8921_s4>;
+				vin_lvs2-supply = <&pm8921_s4>;
+				vin_lvs4_5_7-supply = <&pm8921_s4>;
+				vdd_ncp-supply = <&pm8921_l6>;
+				vdd_l24-supply = <&pm8921_s1>;
+				vdd_l25-supply = <&pm8921_s1>;
+				vdd_l27-supply = <&pm8921_s7>;
+				vdd_l28-supply = <&pm8921_s7>;
+
+				/* Buck SMPS */
+				pm8921_s1: s1 {
+					regulator-always-on;
+					regulator-min-microvolt = <1225000>;
+					regulator-max-microvolt = <1225000>;
+					qcom,switch-mode-frequency = <3200000>;
+					bias-pull-down;
+				};
+
+				pm8921_s2: s2 {
+					regulator-min-microvolt = <1300000>;
+					regulator-max-microvolt = <1300000>;
+					qcom,switch-mode-frequency = <1600000>;
+					bias-pull-down;
+				};
+
+				pm8921_s3: s3 {
+					regulator-min-microvolt = <500000>;
+					regulator-max-microvolt = <1150000>;
+					qcom,switch-mode-frequency = <4800000>;
+					bias-pull-down;
+				};
+
+				pm8921_s4: s4 {
+					regulator-always-on;
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					qcom,switch-mode-frequency = <1600000>;
+					bias-pull-down;
+					qcom,force-mode =
+						<QCOM_RPM_FORCE_MODE_AUTO>;
+				};
+
+				pm8921_s7: s7 {
+					regulator-min-microvolt = <1300000>;
+					regulator-max-microvolt = <1300000>;
+					qcom,switch-mode-frequency = <3200000>;
+				};
+
+				pm8921_s8: s8 {
+					regulator-min-microvolt = <2200000>;
+					regulator-max-microvolt = <2200000>;
+					qcom,switch-mode-frequency = <1600000>;
+				};
+
+				/* PMOS LDO */
+				pm8921_l1: l1 {
+					regulator-always-on;
+					regulator-min-microvolt = <1100000>;
+					regulator-max-microvolt = <1100000>;
+					bias-pull-down;
+				};
+
+				pm8921_l2: l2 {
+					regulator-min-microvolt = <1200000>;
+					regulator-max-microvolt = <1200000>;
+					bias-pull-down;
+				};
+
+				pm8921_l3: l3 {
+					regulator-min-microvolt = <3075000>;
+					regulator-max-microvolt = <3075000>;
+					bias-pull-down;
+				};
+
+				pm8921_l4: l4 {
+					regulator-always-on;
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					bias-pull-down;
+				};
+
+				pm8921_l5: l5 {
+					regulator-min-microvolt = <2950000>;
+					regulator-max-microvolt = <2950000>;
+					bias-pull-down;
+				};
+
+				pm8921_l6: l6 {
+					regulator-min-microvolt = <2950000>;
+					regulator-max-microvolt = <2950000>;
+					bias-pull-down;
+				};
+
+				pm8921_l7: l7 {
+					regulator-min-microvolt = <1850000>;
+					regulator-max-microvolt = <2950000>;
+					bias-pull-down;
+				};
+
+				pm8921_l8: l8 {
+					regulator-min-microvolt = <2800000>;
+					regulator-max-microvolt = <2800000>;
+					bias-pull-down;
+				};
+
+				pm8921_l9: l9 {
+					regulator-min-microvolt = <3000000>;
+					regulator-max-microvolt = <3000000>;
+					bias-pull-down;
+				};
+
+				pm8921_l10: l10 {
+					regulator-min-microvolt = <2900000>;
+					regulator-max-microvolt = <2900000>;
+					bias-pull-down;
+				};
+
+				pm8921_l11: l11 {
+					regulator-min-microvolt = <3000000>;
+					regulator-max-microvolt = <3000000>;
+					bias-pull-down;
+				};
+
+				pm8921_l12: l12 {
+					regulator-min-microvolt = <1200000>;
+					regulator-max-microvolt = <1200000>;
+					bias-pull-down;
+				};
+
+				pm8921_l13: l13 {
+					regulator-min-microvolt = <2220000>;
+					regulator-max-microvolt = <2220000>;
+				};
+
+				pm8921_l14: l14 {
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					bias-pull-down;
+				};
+
+				pm8921_l15: l15 {
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <2950000>;
+					bias-pull-down;
+				};
+
+				pm8921_l16: l16 {
+					regulator-min-microvolt = <2800000>;
+					regulator-max-microvolt = <2800000>;
+					bias-pull-down;
+				};
+
+				pm8921_l17: l17 {
+					regulator-min-microvolt = <2000000>;
+					regulator-max-microvolt = <2000000>;
+					bias-pull-down;
+				};
+
+				pm8921_l18: l18 {
+					regulator-min-microvolt = <1300000>;
+					regulator-max-microvolt = <1800000>;
+					bias-pull-down;
+				};
+
+				pm8921_l21: l21 {
+					regulator-min-microvolt = <1050000>;
+					regulator-max-microvolt = <1050000>;
+					bias-pull-down;
+				};
+
+				pm8921_l22: l22 {
+					regulator-min-microvolt = <2600000>;
+					regulator-max-microvolt = <2600000>;
+					bias-pull-down;
+				};
+
+				pm8921_l23: l23 {
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					bias-pull-down;
+				};
+
+				pm8921_l24: l24 {
+					regulator-min-microvolt = <750000>;
+					regulator-max-microvolt = <1150000>;
+					bias-pull-down;
+				};
+
+				pm8921_l25: l25 {
+					regulator-always-on;
+					regulator-min-microvolt = <1250000>;
+					regulator-max-microvolt = <1250000>;
+					bias-pull-down;
+				};
+
+				pm8921_l27: l27 {
+					regulator-min-microvolt = <1100000>;
+					regulator-max-microvolt = <1100000>;
+				};
+
+				pm8921_l28: l28 {
+					regulator-min-microvolt = <1050000>;
+					regulator-max-microvolt = <1050000>;
+					bias-pull-down;
+				};
+
+				pm8921_l29: l29 {
+					regulator-min-microvolt = <2000000>;
+					regulator-max-microvolt = <2000000>;
+					bias-pull-down;
+				};
+
+				/* Low Voltage Switch */
+				pm8921_lvs1: lvs1 {
+					bias-pull-down;
+				};
+
+				pm8921_lvs2: lvs2 {
+					bias-pull-down;
+				};
+
+				pm8921_lvs3: lvs3 {
+					bias-pull-down;
+				};
+
+				pm8921_lvs4: lvs4 {
+					bias-pull-down;
+				};
+
+				pm8921_lvs5: lvs5 {
+					bias-pull-down;
+				};
+
+				pm8921_lvs6: lvs6 {
+					bias-pull-down;
+				};
+
+				pm8921_lvs7: lvs7 {
+					bias-pull-down;
+				};
+
+				pm8921_ncp: ncp {
+					regulator-min-microvolt = <2000000>;
+					regulator-max-microvolt = <2000000>;
+					qcom,switch-mode-frequency = <1600000>;
+				};
+
+				pm8921_hdmi_switch: hdmi-switch {
+					bias-pull-down;
+				};
+			};
+		};
+
 		/* Temporary fixed regulator */
 		vsdcc_fixed: vsdcc-regulator {
 			compatible = "regulator-fixed";
-- 
1.9.1

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]
  Powered by Linux