From: Grygorii Strashko <Grygorii.Strashko@xxxxxxxxxx> The interrupt polarity provided in devicetree is used to configure the interrupt controller(ARM GIC), however, it seems that we have an inverter at the GIC boundary inside AM57xx which inverts the signal input from sys_irq external interrupt source. Further, as per GIC distributor TRM, http://infocenter.arm.com/help/topic/com.arm.doc.ddi0438d/BGBHIACJ.html#BABJFCFB ARM GIC distributor does not support IRQ trigger type IRQ_TYPE_LEVEL_LOW, and only rising or level high signals. However, for some reason, the current configuration(which gets ignored by GIC driver) functions on some platforms, however, on few platforms results in infinite interrupts hogging the system down. Switch over to rising edge for GIC configuration which is also aligned with trigger point from the RTC chip and the internal inversion. Fixes: 5a0f93c6576a ("ARM: dts: Add am57xx-beagle-x15") Signed-off-by: Grygorii Strashko <Grygorii.Strashko@xxxxxxxxxx> Signed-off-by: Nishanth Menon <nm@xxxxxx> --- arch/arm/boot/dts/am57xx-beagle-x15.dts | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/boot/dts/am57xx-beagle-x15.dts b/arch/arm/boot/dts/am57xx-beagle-x15.dts index fe141c47d647..57279e3b439b 100644 --- a/arch/arm/boot/dts/am57xx-beagle-x15.dts +++ b/arch/arm/boot/dts/am57xx-beagle-x15.dts @@ -455,7 +455,7 @@ mcp_rtc: rtc@6f { compatible = "microchip,mcp7941x"; reg = <0x6f>; - interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_LOW>; /* IRQ_SYS_1N */ + interrupts = <GIC_SPI 2 IRQ_TYPE_EDGE_RISING>; /* IRQ_SYS_1N */ pinctrl-names = "default"; pinctrl-0 = <&mcp79410_pins_default>; -- 1.7.9.5 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
