[PATCH 0/9] USB31DRD phy updates for Google Tensor gs101 (orientation & DWC3 rpm)

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi,

This series enables USB3 Type-C lane orientation detection and
configuration on platforms that support this (Google gs101), and it
also allows the DWC3 core to enter runtime suspend even when UDC is
active.

For lane orientation, this driver now optionally (based on DT)
subscribes to the TCPC's lane orientation notifier and remembers the
orientation to later be used during phy_init().

To enable DWC3 runtime suspend, the gadget needs to inform the core via
dwc3_gadget_interrupt() with event type == DWC3_DEVICE_EVENT_DISCONNECT
of a cable disconnect. For that to allow to happen, this driver
therefore needs to stop forcing the Vbus and bvalid signals to active
and instead change their state based on actual conditions. The same
TCPC notifier is used to detect this, and program the hardware
accordingly.

That signal state is based on advice given by Thinh in
https://lore.kernel.org/all/20240813230625.jgkatqstyhcmpezv@xxxxxxxxxxxx/

Both changes together now allow cable orientation detection to work, as
the DWC3 will now call phy_exit() on cable disconnect, and we can
reprogram the lane mux in phy_init().

On top of that, there are some small related cleanup patches.

Signed-off-by: André Draszik <andre.draszik@xxxxxxxxxx>
---
André Draszik (9):
      dt-bindings: phy: samsung,usb3-drd-phy: align to universal style
      dt-bindings: phy: samsung,usb3-drd-phy: add optional orientation-switch
      dt-bindings: phy: samsung,usb3-drd-phy: gs101: require Type-C properties
      phy: exynos5-usbdrd: convert to dev_err_probe
      phy: exynos5-usbdrd: fix EDS distribution tuning (gs101)
      phy: exynos5-usbdrd: gs101: ensure power is gated to SS phy in phy_exit()
      phy: exynos5-usbdrd: gs101: configure SS lanes based on orientation
      phy: exynos5-usbdrd: subscribe to orientation notifier if required
      phy: exynos5-usbdrd: allow DWC3 runtime suspend with UDC bound (E850+)

 .../bindings/phy/samsung,usb3-drd-phy.yaml         |  20 ++
 drivers/phy/samsung/Kconfig                        |   1 +
 drivers/phy/samsung/phy-exynos5-usbdrd.c           | 222 ++++++++++++++++-----
 3 files changed, 197 insertions(+), 46 deletions(-)
---
base-commit: ed9a4ad6e5bd3a443e81446476718abebee47e82
change-id: 20241127-gs101-phy-lanes-orientation-phy-29d20c6d84d2

Best regards,
-- 
André Draszik <andre.draszik@xxxxxxxxxx>





[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux