Radxa ROCK 5A has a M.2 E key slot which can be used for wireless modules. there are two enable/disable switch pins, one for Wi-Fi, another for Bluetooth. these pins are connected to GPIO. add rfkill and rfkill-bt to control these pins via GPIO. Signed-off-by: FUKAUMI Naoki <naoki@xxxxxxxxx> --- this patch depends on [1] which depends on [2]. [1] https://patchwork.kernel.org/project/linux-rockchip/patch/20241119100813.78820-1-naoki@xxxxxxxxx/ [2] https://patchwork.kernel.org/project/linux-rockchip/patch/20241119095113.78151-1-naoki@xxxxxxxxx/ --- arch/arm64/boot/dts/rockchip/rk3588s-rock-5a.dts | 14 ++++++++++++++ 1 file changed, 14 insertions(+) diff --git a/arch/arm64/boot/dts/rockchip/rk3588s-rock-5a.dts b/arch/arm64/boot/dts/rockchip/rk3588s-rock-5a.dts index 2d7fc691fafc..799340cb8242 100644 --- a/arch/arm64/boot/dts/rockchip/rk3588s-rock-5a.dts +++ b/arch/arm64/boot/dts/rockchip/rk3588s-rock-5a.dts @@ -21,6 +21,20 @@ led-1 { }; }; + rfkill { + compatible = "rfkill-gpio"; + label = "rfkill-m2-wlan"; + radio-type = "wlan"; + shutdown-gpios = <&gpio0 RK_PD3 GPIO_ACTIVE_HIGH>; + }; + + rfkill-bt { + compatible = "rfkill-gpio"; + label = "rfkill-m2-bt"; + radio-type = "bluetooth"; + shutdown-gpios = <&gpio0 RK_PC6 GPIO_ACTIVE_HIGH>; + }; + vcc12v_dcin: dcin: regulator-vcc12v-dcin { compatible = "regulator-fixed"; regulator-name = "vcc12v_dcin"; -- 2.43.0
