Il 26/11/24 03:55, Chunfeng Yun ha scritto:
There are 2 USB controllers on mt8196, each controller's wakeup control is
different, add some specific versions for them.
Is there any MTU3 controller in MT8196, like all other MediaTek SoCs?
If so, then please just add the wakeup control to the MTU3 driver, otherwise
we are going to duplicate this for yet another SoC, like we've done for MT8192,
MT8195, MT8188 and MT8186 already...
Cheers,
Angelo
Signed-off-by: Chunfeng Yun <chunfeng.yun@xxxxxxxxxxxx>
---
drivers/usb/host/xhci-mtk.c | 18 ++++++++++++++++++
1 file changed, 18 insertions(+)
diff --git a/drivers/usb/host/xhci-mtk.c b/drivers/usb/host/xhci-mtk.c
index 3252e3d2d79c..31223912b0b4 100644
--- a/drivers/usb/host/xhci-mtk.c
+++ b/drivers/usb/host/xhci-mtk.c
@@ -113,6 +113,12 @@
#define WC1_IS_P_95 BIT(12)
#define WC1_IS_EN_P0_95 BIT(6)
+/* mt8196 */
+#define PERI_WK_CTRL0_8196 0x08
+#define UWK_V1_7_CTRL2_MASK 0x5
+
+#define WCP1_IS_EN BIT(7) /* port1 en bit */
+
/* mt2712 etc */
#define PERI_SSUSB_SPM_CTRL 0x0
#define SSC_IP_SLEEP_EN BIT(4)
@@ -129,6 +135,8 @@ enum ssusb_uwk_vers {
SSUSB_UWK_V1_4, /* mt8195 IP1 */
SSUSB_UWK_V1_5, /* mt8195 IP2 */
SSUSB_UWK_V1_6, /* mt8195 IP3 */
+ SSUSB_UWK_V1_7, /* mt8196 IP0 */
+ SSUSB_UWK_V1_8, /* mt8196 IP1 */
};
/*
@@ -381,6 +389,16 @@ static void usb_wakeup_ip_sleep_set(struct xhci_hcd_mtk *mtk, bool enable)
msk = WC0_IS_EN_P3_95 | WC0_IS_C_95(0x7) | WC0_IS_P_95;
val = enable ? (WC0_IS_EN_P3_95 | WC0_IS_C_95(0x1)) : 0;
break;
+ case SSUSB_UWK_V1_7:
+ reg = mtk->uwk_reg_base + PERI_WK_CTRL0_8196;
+ msk = UWK_V1_7_CTRL2_MASK;
+ val = enable ? msk : 0;
+ break;
+ case SSUSB_UWK_V1_8:
+ reg = mtk->uwk_reg_base + PERI_WK_CTRL0_8196;
+ msk = WCP1_IS_EN;
+ val = enable ? msk : 0;
+ break;
case SSUSB_UWK_V2:
reg = mtk->uwk_reg_base + PERI_SSUSB_SPM_CTRL;
msk = SSC_IP_SLEEP_EN | SSC_SPM_INT_EN;
