Add a dt-binding for the Microchip Inter-Processor Communication (IPC) mailbox controller. Signed-off-by: Valentina Fernandez <valentina.fernandezalanis@xxxxxxxxxxxxx> --- .../bindings/mailbox/microchip,sbi-ipc.yaml | 111 ++++++++++++++++++ 1 file changed, 111 insertions(+) create mode 100644 Documentation/devicetree/bindings/mailbox/microchip,sbi-ipc.yaml diff --git a/Documentation/devicetree/bindings/mailbox/microchip,sbi-ipc.yaml b/Documentation/devicetree/bindings/mailbox/microchip,sbi-ipc.yaml new file mode 100644 index 000000000000..b69af85ec608 --- /dev/null +++ b/Documentation/devicetree/bindings/mailbox/microchip,sbi-ipc.yaml @@ -0,0 +1,111 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mailbox/microchip,sbi-ipc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Microchip Inter-processor communication (IPC) mailbox controller + +maintainers: + - Valentina Fernandez <valentina.fernandezalanis@xxxxxxxxxxxxx> + +description: + The Microchip Inter-processor Communication (IPC) facilitates + message passing between processors using an interrupt signaling + mechanism. + +properties: + compatible: + oneOf: + - description: + Intended for use by software running in supervisor privileged + mode (s-mode). This SBI interface is compatible with the Mi-V + Inter-hart Communication (IHC) IP. + const: microchip,sbi-ipc + + - description: + Intended for use by the SBI implementation in machine mode + (m-mode), this compatible string is for the MIV_IHC Soft-IP. + const: microchip,miv-ihc-rtl-v2 + + reg: + maxItems: 1 + + interrupts: + minItems: 1 + maxItems: 5 + + interrupt-names: + minItems: 1 + maxItems: 5 + items: + pattern: "^hart-[0-5]+$" + + "#mbox-cells": + description: > + For "microchip,sbi-ipc", the cell represents the global "logical" + channel IDs. The meaning of channel IDs are platform firmware dependent. + + For "microchip,miv-ihc-rtl-v2", the cell represents the physical + channel and does not vary based on the platform firmware. + const: 1 + + microchip,ihc-chan-disabled-mask: + description: > + Represents the enable/disable state of the bi-directional IHC + channels within the MIV-IHC IP configuration. + + A bit set to '1' indicates that the corresponding channel is disabled, + and any read or write operations to that channel will return zero. + + A bit set to '0' indicates that the corresponding channel is enabled + and will be accessible through its dedicated address range registers. + + The actual enable/disable state of each channel is determined by the + IP block’s configuration. + $ref: /schemas/types.yaml#/definitions/uint16 + maximum: 0x7fff + default: 0 + +required: + - compatible + - interrupts + - interrupt-names + - "#mbox-cells" + +additionalProperties: false + +allOf: + - if: + properties: + compatible: + contains: + const: microchip,sbi-ipc + then: + properties: + reg: false + microchip,ihc-chan-disabled-mask: false + else: + required: + - reg + - microchip,ihc-chan-disabled-mask + +examples: + - | + mailbox { + compatible = "microchip,sbi-ipc"; + interrupt-parent = <&plic>; + interrupts = <180>, <179>, <178>; + interrupt-names = "hart-1", "hart-2", "hart-3"; + #mbox-cells = <1>; + }; + - | + mailbox@50000000 { + compatible = "microchip,miv-ihc-rtl-v2"; + microchip,ihc-chan-disabled-mask = /bits/ 16 <0>; + reg = <0x50000000 0x1C000>; + interrupt-parent = <&plic>; + interrupts = <180>, <179>, <178>; + interrupt-names = "hart-1", "hart-2", "hart-3"; + #mbox-cells = <1>; + }; -- 2.34.1
