Re: [PATCH v7 4/5] media: platform: mediatek: isp: add mediatek ISP3.0 camsv

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi, Julien:

On Thu, 2024-11-21 at 09:53 +0100, Julien Stephan wrote:
> External email : Please do not click links or open attachments until you have verified the sender or the content.
> 
> 
> From: Phi-bang Nguyen <pnguyen@xxxxxxxxxxxx>
> 
> This driver provides a path to bypass the SoC ISP so that image data
> coming from the SENINF can go directly into memory without any image
> processing. This allows the use of an external ISP.
> 
> Signed-off-by: Phi-bang Nguyen <pnguyen@xxxxxxxxxxxx>
> Signed-off-by: Florian Sylvestre <fsylvestre@xxxxxxxxxxxx>
> [Paul Elder fix irq locking]
> Signed-off-by: Paul Elder <paul.elder@xxxxxxxxxxxxxxxx>
> Co-developed-by: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
> Signed-off-by: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
> Co-developed-by: Julien Stephan <jstephan@xxxxxxxxxxxx>
> Signed-off-by: Julien Stephan <jstephan@xxxxxxxxxxxx>
> ---

[snip]

> +/* -----------------------------------------------------------------------------
> + * VB2 Queue Operations
> + */
> +
> +static int mtk_cam_vb2_queue_setup(struct vb2_queue *vq,
> +                                  unsigned int *num_buffers,
> +                                  unsigned int *num_planes,
> +                                  unsigned int sizes[],
> +                                  struct device *alloc_devs[])
> +{
> +       struct mtk_cam_video_device *vdev =
> +               vb2_queue_to_mtk_cam_video_device(vq);
> +       struct mtk_cam_dev *cam = vb2_get_drv_priv(vq);
> +       const struct v4l2_pix_format_mplane *fmt = &vdev->format;
> +       unsigned int size, default_num_planes, i;
> +
> +       size = fmt->plane_fmt[0].sizeimage;
> +
> +       default_num_planes = 1;

Make this a constant.

> +
> +       if (*num_planes == 0) {
> +               *num_planes = default_num_planes;
> +               for (i = 0; i < *num_planes; ++i)
> +                       sizes[i] = size;

*num_planes = 1, so this for-loop could be replaced by:

size[0] = size;

> +       } else if (*num_planes != default_num_planes || sizes[0] < size) {

The term 'default_num_planes' would let's think it could support other number of planes.
But it only support one plane. Maybe use 'supported_num_planes'.

Regards,
CK

> +               return -EINVAL;
> +       }
> +
> +       (*cam->hw_functions->mtk_cam_fbc_init)(cam, *num_buffers);
> +
> +       return 0;
> +}
> +
> 
> 




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux