On Mon, 11 Nov 2024 14:12:01 +0200
Antoniu Miclaus <antoniu.miclaus@xxxxxxxxxx> wrote:
> Add support for enabling/disabling oversampling.
As earlier, this is usually an oversample by N, not just a boolean.
If it is boolean for this device, then I assume there is a fixed
ratio. Make the interface controlling between 1 and whatever that
ratio is.
Jonathan
>
> Signed-off-by: Antoniu Miclaus <antoniu.miclaus@xxxxxxxxxx>
> ---
> changes in v6:
> - add support for oversampling enable/disable.
> drivers/iio/adc/adi-axi-adc.c | 10 ++++++++++
> 1 file changed, 10 insertions(+)
>
> diff --git a/drivers/iio/adc/adi-axi-adc.c b/drivers/iio/adc/adi-axi-adc.c
> index 9bf967d5b730..8ec668f59c88 100644
> --- a/drivers/iio/adc/adi-axi-adc.c
> +++ b/drivers/iio/adc/adi-axi-adc.c
> @@ -46,6 +46,7 @@
> #define ADI_AXI_ADC_CTRL_DDR_EDGESEL_MASK BIT(1)
>
> #define ADI_AXI_ADC_REG_CNTRL_3 0x004c
> +#define AD485X_CNTRL_3_CUSTOM_CTRL_OS_EN_MSK BIT(2)
> #define AD485X_CNTRL_3_CUSTOM_CTRL_PACKET_FORMAT_MSK GENMASK(1, 0)
> #define AD485X_PACKET_FORMAT_20BIT 0x0
> #define AD485X_PACKET_FORMAT_24BIT 0x1
> @@ -341,6 +342,14 @@ static int axi_adc_data_size_set(struct iio_backend *back, unsigned int size)
> AD485X_CNTRL_3_CUSTOM_CTRL_PACKET_FORMAT_MSK, val);
> }
>
> +static int axi_adc_oversampling_en(struct iio_backend *back, bool en)
> +{
> + struct adi_axi_adc_state *st = iio_backend_get_priv(back);
> +
> + return regmap_update_bits(st->regmap, ADI_AXI_ADC_REG_CNTRL_3,
> + AD485X_CNTRL_3_CUSTOM_CTRL_OS_EN_MSK, en);
> +}
> +
> static struct iio_buffer *axi_adc_request_buffer(struct iio_backend *back,
> struct iio_dev *indio_dev)
> {
> @@ -390,6 +399,7 @@ static const struct iio_backend_ops adi_axi_adc_ops = {
> .chan_status = axi_adc_chan_status,
> .interface_type_get = axi_adc_interface_type_get,
> .data_size_set = axi_adc_data_size_set,
> + .oversampling_en = axi_adc_oversampling_en,
> .debugfs_reg_access = iio_backend_debugfs_ptr(axi_adc_reg_access),
> .debugfs_print_chan_status = iio_backend_debugfs_ptr(axi_adc_debugfs_print_chan_status),
> };
