Add dts nodes to enable ethernet interface on qcs8300-ride. The EMAC, SerDes and EPHY version are the same as those in sa8775p. Signed-off-by: Yijie Yang <quic_yijiyang@xxxxxxxxxxx> --- This patch series depends on below patch series: https://lore.kernel.org/all/20240925-qcs8300_initial_dtsi-v2-0-494c40fa2a42@xxxxxxxxxxx/ - Reviewed https://lore.kernel.org/all/20241010-schema-v1-0-98b2d0a2f7a2@xxxxxxxxxxx/ - Applied Changes in v4: - Remove the dts split and revision 2 changes, as the 1G PHY version is now obsolete. - Enable 2.5G PHY in qcs8300-ride.dts. - Replace spaces with indents as possible. - Update the subject of the first change. - Link to v3: https://lore.kernel.org/all/20241118071846.2964333-1-quic_yijiyang@xxxxxxxxxxx/ --- Yijie Yang (2): arm64: dts: qcom: qcs8300: add the first 2.5G ethernet arm64: dts: qcom: qcs8300-ride: enable ethernet0 arch/arm64/boot/dts/qcom/qcs8300-ride.dts | 112 ++++++++++++++++++++++++++++++ arch/arm64/boot/dts/qcom/qcs8300.dtsi | 43 ++++++++++++ 2 files changed, 155 insertions(+) --- base-commit: c83f0b825741bcb9d8a7be67c63f6b9045d30f5a change-id: 20241111-dts_qcs8300-f8383ef0f5ef Best regards, -- Yijie Yang <quic_yijiyang@xxxxxxxxxxx>
