On Fri, Nov 08, 2024 at 02:56:25PM +0800, Shawn Lin wrote:
> RK3576 SoC contains a UFS controller, add initial support for it.
> The features are:
> (1) support UFS 2.0 features
> (2) High speed up to HS-G3
> (3) 2RX-2TX lanes
> (4) auto H8 entry and exit
>
> Software limitation:
> (1) HCE procedure: enable controller->enable intr->dme_reset->dme_enable
> (2) disable unipro timeout values before power mode change
>
> Signed-off-by: Shawn Lin <shawn.lin@xxxxxxxxxxxxxx>
> ---
>
> Changes in v5:
> - use device_set_awake_path() and disable ref_out_clk in suspend
> - remove pd_id from header
> - recontruct ufs_rockchip_hce_enable_notify() to workaround hce enable
> without using new quirk
>
> Changes in v4:
> - deal with power domain of rpm and spm suggested by Ulf
> - Fix typo and disable clks in ufs_rockchip_remove
> - remove clk_disable_unprepare(host->ref_out_clk) from
> ufs_rockchip_remove
>
> Changes in v3:
> - reword Kconfig description
> - elaborate more about controller in commit msg
> - use rockchip,rk3576-ufshc for compatible
> - remove useless header file
> - remove inline for ufshcd_is_device_present
> - use usleep_range instead
> - remove initialization, reverse Xmas order
> - remove useless varibles
> - check vops for null
> - other small fixes for err path
> - remove pm_runtime_set_active
> - fix the active and inactive reset-gpios logic
> - fix rpm_lvl and spm_lvl to 5 and move to end of probe path
> - remove unnecessary system PM callbacks
> - use UFSHCI_QUIRK_DME_RESET_ENABLE_AFTER_HCE instead
> of UFSHCI_QUIRK_BROKEN_HCE
>
> Changes in v2: None
>
> drivers/ufs/host/Kconfig | 12 ++
> drivers/ufs/host/Makefile | 1 +
> drivers/ufs/host/ufs-rockchip.c | 368 ++++++++++++++++++++++++++++++++++++++++
> drivers/ufs/host/ufs-rockchip.h | 48 ++++++
> 4 files changed, 429 insertions(+)
> create mode 100644 drivers/ufs/host/ufs-rockchip.c
> create mode 100644 drivers/ufs/host/ufs-rockchip.h
>
> diff --git a/drivers/ufs/host/Kconfig b/drivers/ufs/host/Kconfig
> index 580c8d0..191fbd7 100644
> --- a/drivers/ufs/host/Kconfig
> +++ b/drivers/ufs/host/Kconfig
> @@ -142,3 +142,15 @@ config SCSI_UFS_SPRD
>
> Select this if you have UFS controller on Unisoc chipset.
> If unsure, say N.
> +
> +config SCSI_UFS_ROCKCHIP
> + tristate "Rockchip UFS host controller driver"
> + depends on SCSI_UFSHCD_PLATFORM && (ARCH_ROCKCHIP || COMPILE_TEST)
> + help
> + This selects the Rockchip specific additions to UFSHCD platform driver.
> + UFS host on Rockchip needs some vendor specific configuration before
> + accessing the hardware which includes PHY configuration and vendor
> + specific registers.
> +
> + Select this if you have UFS controller on Rockchip chipset.
> + If unsure, say N.
> diff --git a/drivers/ufs/host/Makefile b/drivers/ufs/host/Makefile
> index 4573aea..2f97feb 100644
> --- a/drivers/ufs/host/Makefile
> +++ b/drivers/ufs/host/Makefile
> @@ -10,5 +10,6 @@ obj-$(CONFIG_SCSI_UFSHCD_PLATFORM) += ufshcd-pltfrm.o
> obj-$(CONFIG_SCSI_UFS_HISI) += ufs-hisi.o
> obj-$(CONFIG_SCSI_UFS_MEDIATEK) += ufs-mediatek.o
> obj-$(CONFIG_SCSI_UFS_RENESAS) += ufs-renesas.o
> +obj-$(CONFIG_SCSI_UFS_ROCKCHIP) += ufs-rockchip.o
> obj-$(CONFIG_SCSI_UFS_SPRD) += ufs-sprd.o
> obj-$(CONFIG_SCSI_UFS_TI_J721E) += ti-j721e-ufs.o
> diff --git a/drivers/ufs/host/ufs-rockchip.c b/drivers/ufs/host/ufs-rockchip.c
> new file mode 100644
> index 0000000..b087ce0
> --- /dev/null
> +++ b/drivers/ufs/host/ufs-rockchip.c
[...]
> +
> + host->clks[0].id = "core";
> + host->clks[1].id = "pclk";
> + host->clks[2].id = "pclk_mphy";
> + err = devm_clk_bulk_get_optional(dev, UFS_MAX_CLKS, host->clks);
Still not using clk_bulk_get_all()? as suggested previously?
> + if (err)
> + return dev_err_probe(dev, err, "failed to get clocks\n");
> +
> + err = clk_bulk_prepare_enable(UFS_MAX_CLKS, host->clks);
> + if (err)
> + return dev_err_probe(dev, err, "failed to enable clocks\n");
> +
> + host->hba = hba;
> +
> + ufshcd_set_variant(hba, host);
> +
> + return 0;
> +}
> +
> +static int ufs_rockchip_rk3576_init(struct ufs_hba *hba)
> +{
> + struct device *dev = hba->dev;
> + int ret;
> +
> + hba->quirks = UFSHCD_QUIRK_SKIP_DEF_UNIPRO_TIMEOUT_SETTING;
> +
> + /* Enable BKOPS when suspend */
> + hba->caps |= UFSHCD_CAP_AUTO_BKOPS_SUSPEND;
> + /* Enable putting device into deep sleep */
> + hba->caps |= UFSHCD_CAP_DEEPSLEEP;
> + /* Enable devfreq of UFS */
> + hba->caps |= UFSHCD_CAP_CLK_SCALING;
> + /* Enable WriteBooster */
> + hba->caps |= UFSHCD_CAP_WB_EN;
> +
> + ret = ufs_rockchip_common_init(hba);
> + if (ret)
> + return dev_err_probe(dev, ret, "ufs common init fail\n");
> +
> + return 0;
> +}
> +
> +static int ufs_rockchip_device_reset(struct ufs_hba *hba)
> +{
> + struct ufs_rockchip_host *host = ufshcd_get_variant(hba);
> +
> + /* Active the reset-gpios */
> + gpiod_set_value_cansleep(host->rst_gpio, 1);
> + usleep_range(20, 25);
> +
> + /* Inactive the reset-gpios */
> + gpiod_set_value_cansleep(host->rst_gpio, 0);
> + usleep_range(20, 25);
> +
> + return 0;
> +}
> +
> +static const struct ufs_hba_variant_ops ufs_hba_rk3576_vops = {
> + .name = "rk3576",
> + .init = ufs_rockchip_rk3576_init,
> + .device_reset = ufs_rockchip_device_reset,
> + .hce_enable_notify = ufs_rockchip_hce_enable_notify,
> + .phy_initialization = ufs_rockchip_rk3576_phy_init,
> +};
> +
> +static const struct of_device_id ufs_rockchip_of_match[] = {
> + { .compatible = "rockchip,rk3576-ufshc", .data = &ufs_hba_rk3576_vops },
> +};
> +MODULE_DEVICE_TABLE(of, ufs_rockchip_of_match);
> +
> +static int ufs_rockchip_probe(struct platform_device *pdev)
> +{
> + struct device *dev = &pdev->dev;
> + const struct ufs_hba_variant_ops *vops;
> + struct ufs_hba *hba;
> + int err;
> +
> + vops = device_get_match_data(dev);
> + if (!vops)
> + return dev_err_probe(dev, -EINVAL, "ufs_hba_variant_ops not defined.\n");
> +
> + err = ufshcd_pltfrm_init(pdev, vops);
> + if (err)
> + return dev_err_probe(dev, err, "ufshcd_pltfrm_init failed\n");
> +
> + hba = platform_get_drvdata(pdev);
> + /* Set the default desired pm level in case no users set via sysfs */
> + ufs_rockchip_set_pm_lvl(hba);
Is it possible to move this to ufs_rockchip_rk3576_init()?
> +
> + return 0;
> +}
> +
> +static void ufs_rockchip_remove(struct platform_device *pdev)
> +{
> + struct ufs_hba *hba = platform_get_drvdata(pdev);
> + struct ufs_rockchip_host *host = ufshcd_get_variant(hba);
> +
> + pm_runtime_forbid(&pdev->dev);
> + pm_runtime_get_noresume(&pdev->dev);
> + ufshcd_remove(hba);
> + ufshcd_dealloc_host(hba);
You wouldn't need these if you rebase this series on top of scsi/for-next.
> + clk_bulk_disable_unprepare(UFS_MAX_CLKS, host->clks);
> +}
> +
> +#ifdef CONFIG_PM
> +static int ufs_rockchip_runtime_suspend(struct device *dev)
> +{
> + struct ufs_hba *hba = dev_get_drvdata(dev);
> + struct ufs_rockchip_host *host = ufshcd_get_variant(hba);
> +
> + clk_disable_unprepare(host->ref_out_clk);
> +
> + /* Shouldn't power down if rpm_lvl is less than level 5. */
> + dev_pm_genpd_rpm_always_on(dev, hba->rpm_lvl < UFS_PM_LVL_5 ? true : false);
> +
> + return ufshcd_runtime_suspend(dev);
> +}
> +
> +static int ufs_rockchip_runtime_resume(struct device *dev)
> +{
> + struct ufs_hba *hba = dev_get_drvdata(dev);
> + struct ufs_rockchip_host *host = ufshcd_get_variant(hba);
> + int err;
> +
> + err = clk_prepare_enable(host->ref_out_clk);
> + if (err) {
> + dev_err(hba->dev, "failed to enable ref out clock %d\n", err);
> + return err;
> + }
> +
> + reset_control_assert(host->rst);
> + usleep_range(1, 2);
> + reset_control_deassert(host->rst);
> +
> + return ufshcd_runtime_resume(dev);
> +}
> +#endif
> +
> +#ifdef CONFIG_PM_SLEEP
> +static int ufs_rockchip_system_suspend(struct device *dev)
> +{
> + struct ufs_hba *hba = dev_get_drvdata(dev);
> + struct ufs_rockchip_host *host = ufshcd_get_variant(hba);
> + int err;
> +
> + if (hba->spm_lvl < UFS_PM_LVL_5)
> + device_set_awake_path(dev);
It'd be worth adding a comment here as the API naming is not very clear now.
- Mani
--
மணிவண்ணன் சதாசிவம்
