Enable the CDSP on MPT8750 board and add firmware for the modem, however
keep it as failed because modem crashes after booting for unknown
reasons.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
---
arch/arm64/boot/dts/qcom/sm8750-mtp.dts | 15 +++++++++++++++
1 file changed, 15 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/sm8750-mtp.dts b/arch/arm64/boot/dts/qcom/sm8750-mtp.dts
index 8eeed7f2f7766326cfc7830002768087e9783b9b..e2562ea5996ddfb1bee03b367082f4e1890131f3 100644
--- a/arch/arm64/boot/dts/qcom/sm8750-mtp.dts
+++ b/arch/arm64/boot/dts/qcom/sm8750-mtp.dts
@@ -791,6 +791,21 @@ &remoteproc_adsp {
status = "okay";
};
+&remoteproc_cdsp {
+ firmware-name = "qcom/sm8750/cdsp.mbn",
+ "qcom/sm8750/cdsp_dtb.mbn";
+
+ status = "okay";
+};
+
+&remoteproc_mpss {
+ firmware-name = "qcom/sm8750/modem.mbn",
+ "qcom/sm8750/modem_dtb.mbn";
+
+ /* Modem crashes with "DOG detects stalled initialization" */
+ status = "fail";
+};
+
&tlmm {
/* reserved for secure world */
gpio-reserved-ranges = <36 4>, <74 1>;
--
2.43.0
