On Wed Nov 20, 2024 at 5:32 PM CET, Per-Daniel Olsson wrote: > Add devicetree bindings for the OPT4060 RGBW color sensor. > > Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx> > Signed-off-by: Per-Daniel Olsson <perdaniel.olsson@xxxxxxxx> > --- > .../bindings/iio/light/ti,opt4060.yaml | 51 +++++++++++++++++++ > 1 file changed, 51 insertions(+) > create mode 100644 Documentation/devicetree/bindings/iio/light/ti,opt4060.yaml > > diff --git a/Documentation/devicetree/bindings/iio/light/ti,opt4060.yaml b/Documentation/devicetree/bindings/iio/light/ti,opt4060.yaml > new file mode 100644 > index 000000000000..0577e27db1ef > --- /dev/null > +++ b/Documentation/devicetree/bindings/iio/light/ti,opt4060.yaml > @@ -0,0 +1,51 @@ > +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) > +%YAML 1.2 > +--- > +$id: http://devicetree.org/schemas/iio/light/ti,opt4060.yaml# > +$schema: http://devicetree.org/meta-schemas/core.yaml# > + > +title: Texas Instruments OPT4060 RGBW Color Sensor > + > +maintainers: > + - Per-Daniel Olsson <perdaniel.olsson@xxxxxxxx> > + > +description: > + Texas Instrument RGBW high resolution color sensor over I2C. > + https://www.ti.com/lit/gpn/opt4060 > + > +properties: > + compatible: > + enum: > + - ti,opt4060 > + > + reg: > + maxItems: 1 > + > + interrupts: > + maxItems: 1 > + You could simply use vdd-supply: true, as it is obvious what it does. > + vdd-supply: > + description: Regulator that provides power to the sensor. > + is vdd-supply not required? > +required: > + - compatible > + - reg > + > +additionalProperties: false > + > +examples: > + - | > + #include <dt-bindings/interrupt-controller/irq.h> > + i2c { > + #address-cells = <1>; > + #size-cells = <0>; > + > + light-sensor@44 { > + compatible = "ti,opt4060"; > + reg = <0x44>; > + vdd-supply = <&vdd_reg>; > + interrupt-parent = <&gpio5>; > + interrupts = <13 IRQ_TYPE_EDGE_FALLING>; > + }; > + }; > +... Best regards, Javier Carrasco
