The Qualcomm SA8775P platform comes with 2 DisplayPort controllers
for each mdss. edp0 and edp1 correspond to the DP controllers of
mdss0, whereas edp2 and edp3 correspond to the DP controllers of
mdss1. This change enables only the DP controllers, DPTX0 and DPTX1
alongside their corresponding PHYs of mdss0, which have been
validated.
Signed-off-by: Soutrik Mukhopadhyay <quic_mukhopad@xxxxxxxxxxx>
---
arch/arm64/boot/dts/qcom/sa8775p-ride.dtsi | 80 ++++++++++++++++++++++
1 file changed, 80 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/sa8775p-ride.dtsi b/arch/arm64/boot/dts/qcom/sa8775p-ride.dtsi
index adb71aeff339..f4f6a78e94c7 100644
--- a/arch/arm64/boot/dts/qcom/sa8775p-ride.dtsi
+++ b/arch/arm64/boot/dts/qcom/sa8775p-ride.dtsi
@@ -27,6 +27,30 @@
chosen {
stdout-path = "serial0:115200n8";
};
+
+ dp0-connector {
+ compatible = "dp-connector";
+ label = "eDP0";
+ type = "full-size";
+
+ port {
+ dp0_connector_in: endpoint {
+ remote-endpoint = <&mdss0_dp0_out>;
+ };
+ };
+ };
+
+ dp1-connector {
+ compatible = "dp-connector";
+ label = "eDP1";
+ type = "full-size";
+
+ port {
+ dp1_connector_in: endpoint {
+ remote-endpoint = <&mdss0_dp1_out>;
+ };
+ };
+ };
};
&apps_rsc {
@@ -421,6 +445,50 @@
status = "okay";
};
+&mdss0 {
+ status = "okay";
+};
+
+&mdss0_dp0 {
+ status = "okay";
+
+ pinctrl-0 = <&dp0_hot_plug_det>;
+ pinctrl-names = "default";
+};
+
+&mdss0_dp0_out {
+ data-lanes = <0 1 2 3>;
+ link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000 8100000000>;
+ remote-endpoint = <&dp0_connector_in>;
+};
+
+&mdss0_dp0_phy {
+ status = "okay";
+
+ vdda-phy-supply = <&vreg_l1c>;
+ vdda-pll-supply = <&vreg_l4a>;
+};
+
+&mdss0_dp1 {
+ status = "okay";
+
+ pinctrl-0 = <&dp1_hot_plug_det>;
+ pinctrl-names = "default";
+};
+
+&mdss0_dp1_out {
+ data-lanes = <0 1 2 3>;
+ link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000 8100000000>;
+ remote-endpoint = <&dp1_connector_in>;
+};
+
+&mdss0_dp1_phy {
+ status = "okay";
+
+ vdda-phy-supply = <&vreg_l1c>;
+ vdda-pll-supply = <&vreg_l4a>;
+};
+
&pmm8654au_0_gpios {
gpio-line-names = "DS_EN",
"POFF_COMPLETE",
@@ -527,6 +595,18 @@
};
&tlmm {
+ dp0_hot_plug_det: dp0-hot-plug-det-state {
+ pins = "gpio101";
+ function = "edp0_hot";
+ bias-disable;
+ };
+
+ dp1_hot_plug_det: dp1-hot-plug-det-state {
+ pins = "gpio102";
+ function = "edp1_hot";
+ bias-disable;
+ };
+
ethernet0_default: ethernet0-default-state {
ethernet0_mdc: ethernet0-mdc-pins {
pins = "gpio8";
--
2.17.1
