Hi Dave,
Thank you for the patch.
On Wed, Nov 20, 2024 at 07:17:04PM +0000, Dave Stevenson wrote:
> Reviewing the datasheets, register 0x3011 is meant to be 0x02 on imx327
> and 0x00 on imx290.
>
> Move it out of the common registers, and set it appropriately in the
> sensor specific sections. (Included for imx290 to be explicit, rather
> than relying on the default value).
>
> Fixes: 2d41947ec2c0 ("media: i2c: imx290: Add support for imx327 variant")
> Signed-off-by: Dave Stevenson <dave.stevenson@xxxxxxxxxxxxxxx>
Reviewed-by: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
> ---
> drivers/media/i2c/imx290.c | 3 ++-
> 1 file changed, 2 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/media/i2c/imx290.c b/drivers/media/i2c/imx290.c
> index da654deb444a..7d794a509670 100644
> --- a/drivers/media/i2c/imx290.c
> +++ b/drivers/media/i2c/imx290.c
> @@ -268,7 +268,6 @@ static const struct cci_reg_sequence imx290_global_init_settings[] = {
> { IMX290_WINWV, 1097 },
> { IMX290_XSOUTSEL, IMX290_XSOUTSEL_XVSOUTSEL_VSYNC |
> IMX290_XSOUTSEL_XHSOUTSEL_HSYNC },
> - { CCI_REG8(0x3011), 0x02 },
> { CCI_REG8(0x3012), 0x64 },
> { CCI_REG8(0x3013), 0x00 },
> };
> @@ -276,6 +275,7 @@ static const struct cci_reg_sequence imx290_global_init_settings[] = {
> static const struct cci_reg_sequence imx290_global_init_settings_290[] = {
> { CCI_REG8(0x300f), 0x00 },
> { CCI_REG8(0x3010), 0x21 },
> + { CCI_REG8(0x3011), 0x00 },
> { CCI_REG8(0x3016), 0x09 },
> { CCI_REG8(0x3070), 0x02 },
> { CCI_REG8(0x3071), 0x11 },
> @@ -329,6 +329,7 @@ static const struct cci_reg_sequence xclk_regs[][IMX290_NUM_CLK_REGS] = {
> };
>
> static const struct cci_reg_sequence imx290_global_init_settings_327[] = {
> + { CCI_REG8(0x3011), 0x02 },
> { CCI_REG8(0x309e), 0x4A },
> { CCI_REG8(0x309f), 0x4A },
> { CCI_REG8(0x313b), 0x61 },
--
Regards,
Laurent Pinchart
