On 19.11.2024 10:10:53, Ciprian Costea wrote:
> From: Ciprian Marian Costea <ciprianmarian.costea@xxxxxxxxxxx>
>
> On S32G2/S32G3 SoC, there are separate interrupts
> for state change, bus errors, MBs 0-7 and MBs 8-127 respectively.
>
> In order to handle this FlexCAN hardware particularity, reuse
> the 'FLEXCAN_QUIRK_NR_IRQ_3' quirk provided by mcf5441x's irq
> handling support.
>
> Additionally, introduce 'FLEXCAN_QUIRK_SECONDARY_MB_IRQ' quirk,
> which can be used in case there are two separate mailbox ranges
> controlled by independent hardware interrupt lines, as it is
> the case on S32G2/S32G3 SoC.
Please move the quirk and quirk handling to the 2nd patch. The 3rd patch
should only add the nxp,s32g2-flexcan compatible and the struct
flexcan_devtype_data nxp_s32g2_devtype_data.
>
> Signed-off-by: Ciprian Marian Costea <ciprianmarian.costea@xxxxxxxxxxx>
> ---
> drivers/net/can/flexcan/flexcan-core.c | 25 +++++++++++++++++++++++--
> drivers/net/can/flexcan/flexcan.h | 3 +++
> 2 files changed, 26 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/net/can/flexcan/flexcan-core.c b/drivers/net/can/flexcan/flexcan-core.c
> index f0dee04800d3..dc56d4a7d30b 100644
> --- a/drivers/net/can/flexcan/flexcan-core.c
> +++ b/drivers/net/can/flexcan/flexcan-core.c
> @@ -390,9 +390,10 @@ static const struct flexcan_devtype_data nxp_s32g2_devtype_data = {
> .quirks = FLEXCAN_QUIRK_DISABLE_RXFG | FLEXCAN_QUIRK_ENABLE_EACEN_RRS |
> FLEXCAN_QUIRK_DISABLE_MECR | FLEXCAN_QUIRK_BROKEN_PERR_STATE |
> FLEXCAN_QUIRK_USE_RX_MAILBOX | FLEXCAN_QUIRK_SUPPORT_FD |
> - FLEXCAN_QUIRK_SUPPORT_ECC |
> + FLEXCAN_QUIRK_SUPPORT_ECC | FLEXCAN_QUIRK_NR_IRQ_3 |
> FLEXCAN_QUIRK_SUPPORT_RX_MAILBOX |
> - FLEXCAN_QUIRK_SUPPORT_RX_MAILBOX_RTR,
> + FLEXCAN_QUIRK_SUPPORT_RX_MAILBOX_RTR |
> + FLEXCAN_QUIRK_SECONDARY_MB_IRQ,
> };
>
> static const struct can_bittiming_const flexcan_bittiming_const = {
> @@ -1771,12 +1772,21 @@ static int flexcan_open(struct net_device *dev)
> goto out_free_irq_boff;
> }
>
> + if (priv->devtype_data.quirks & FLEXCAN_QUIRK_SECONDARY_MB_IRQ) {
> + err = request_irq(priv->irq_secondary_mb,
> + flexcan_irq, IRQF_SHARED, dev->name, dev);
> + if (err)
> + goto out_free_irq_err;
> + }
> +
> flexcan_chip_interrupts_enable(dev);
>
> netif_start_queue(dev);
>
> return 0;
>
> + out_free_irq_err:
> + free_irq(priv->irq_err, dev);
> out_free_irq_boff:
> free_irq(priv->irq_boff, dev);
> out_free_irq:
> @@ -1808,6 +1818,9 @@ static int flexcan_close(struct net_device *dev)
> free_irq(priv->irq_boff, dev);
> }
>
> + if (priv->devtype_data.quirks & FLEXCAN_QUIRK_SECONDARY_MB_IRQ)
> + free_irq(priv->irq_secondary_mb, dev);
> +
> free_irq(dev->irq, dev);
> can_rx_offload_disable(&priv->offload);
> flexcan_chip_stop_disable_on_error(dev);
> @@ -2197,6 +2210,14 @@ static int flexcan_probe(struct platform_device *pdev)
> }
> }
>
> + if (priv->devtype_data.quirks & FLEXCAN_QUIRK_SECONDARY_MB_IRQ) {
> + priv->irq_secondary_mb = platform_get_irq(pdev, 3);
> + if (priv->irq_secondary_mb < 0) {
> + err = priv->irq_secondary_mb;
> + goto failed_platform_get_irq;
> + }
> + }
> +
> if (priv->devtype_data.quirks & FLEXCAN_QUIRK_SUPPORT_FD) {
> priv->can.ctrlmode_supported |= CAN_CTRLMODE_FD |
> CAN_CTRLMODE_FD_NON_ISO;
> diff --git a/drivers/net/can/flexcan/flexcan.h b/drivers/net/can/flexcan/flexcan.h
> index 4933d8c7439e..d4b1a954c538 100644
> --- a/drivers/net/can/flexcan/flexcan.h
> +++ b/drivers/net/can/flexcan/flexcan.h
> @@ -70,6 +70,8 @@
> #define FLEXCAN_QUIRK_SUPPORT_RX_FIFO BIT(16)
> /* Setup stop mode with ATF SCMI protocol to support wakeup */
> #define FLEXCAN_QUIRK_SETUP_STOP_MODE_SCMI BIT(17)
> +/* Setup secondary mailbox interrupt */
Describe why this quirk is needed. If you have a proper description in
the commit message, you can copy it here.
> +#define FLEXCAN_QUIRK_SECONDARY_MB_IRQ BIT(18)
>
> struct flexcan_devtype_data {
> u32 quirks; /* quirks needed for different IP cores */
> @@ -105,6 +107,7 @@ struct flexcan_priv {
> struct regulator *reg_xceiver;
> struct flexcan_stop_mode stm;
>
> + int irq_secondary_mb;
Please place it after the irq_err, this way it's in order with the
spread sheet.
> int irq_boff;
> int irq_err;
>
regards,
Marc
--
Pengutronix e.K. | Marc Kleine-Budde |
Embedded Linux | https://www.pengutronix.de |
Vertretung Nürnberg | Phone: +49-5121-206917-129 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-9 |
Attachment:
signature.asc
Description: PGP signature
